B08_ATCH_1_SALIENTS.pdf
PDF 275 KB Posted
- Attached to
- Robotic Total Stations and Access. IAW Salients
- Solicitation number
- 140G0126Q0301
About this file
This is a Salient Characteristics document (S26089) for a federal contract solicitation specifying robotic total stations and accessories required by the United States Geological Survey (USGS).
The requirement consists of three complete systems to be delivered to three separate USGS locations: Washington Water Science Center (Tacoma, WA), Northwest Field Office (Ferndale, WA), and Pacific Islands Water Science Center (Honolulu, HI). Each system comprises the following: 3 robotic total stations with specified performance standards including 1 arc-second angular accuracy, Direct Reflex Plus EDM technology with 1.0 mm + 2 ppm prism accuracy and 1,300 m reflectorless range, integrated color camera with 2,048 × 1,536 pixel resolution, 6-hour battery life, IP65 rating, and built-in optical plummet and 30x telescope; 3 dual-mode 360-degree active/passive prisms with 800 m active tracking range and 8-hour battery capacity; 3 combo charger kits with smart charging technology, 2 total station batteries, and 2 target batteries per kit; 3 AC power supplies with vehicle charging adapters; 3 thumb release bipods with 6 ft. extension capability; 3 carbon fiber prism poles extending to 8.5 ft.; 3 field controllers (5-inch Android 14 devices with 1,280 × 720 resolution, 10-hour battery life, IP68 rating, and integrated GNSS); 3 perpetual field-survey software licenses optimized for point measurement and scanning; 3 pole mounts with quick-release mechanisms; 3 radio modules (2.4 GHz); 6 surveying-grade tripods with dual clamp locks; 3 traverse kits including prism base and tribrach; one full-day on-site training at the Tacoma location; calibration documentation with service placards; and manufacturer's standard warranty covering products and software for at least one year. Shipping requires one-third of each item quantity distributed equally to all three USGS addresses.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140G0126Q0301.pdf | ||
| B08_ATCH_2_508.pdf | ||
| B08_ATCH_3_FISMA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics S26089
ROBOTIC TOTAL STATIONS and ACCESSORIES
3 EA, Robotic Total Station:
1. Shall consist of a robotic total station instrument for surveying, imaging, and 3D scanning applications.
2. Shall meet or exceed an angular accuracy of 1 arc-second (1″).
3. Shall include Direct Reflex (DR) Plus Electronic Distance Measurement (EDM) technology.
4. Shall meet or exceed EDM – DR Plus ISO accuracies of 1.0 mm + 2 ppm (Prism) and RMSE accuracies of 2.0 mm + 2 ppm (DR) with a standard prism range of at least 2,500 m.
5. Shall include Autolock, MagDrive Servo, Surepoint, Active Tracking, Finelock, SureScan, and Vision technologies or features.
6. Shall have a long-range prism measurement range of at least 5,500 m and a reflectorless range of at least
1300 m to a 90-percent reflective white target under normal operating conditions.
7. Shall include an integrated color camera with still-image resolution of at least 2,048 × 1,536 pixels and live video streaming to the field controller.
8. Shall include dual layer password protection features.
9. Shall include a centered, dual-axis automatic level compensator with a range of at least ±5.4 arc-minutes and an accuracy of 0.5 arc-second or better.
10. Shall operate from internal rechargeable Lithium-Ion batteries with an operating time of at least 6 hours on a single charge.
11. Shall have a built-in optical plummet.
12. Shall have a built-in telescope capable of at least 30x magnification.
13. Shall include the instrument-side components necessary for a 2.4 GHz frequency-hopping, spread-spectrum robotic radio link with the field controller.
14. Shall include USB, serial, and Bluetooth communications.
15. Shall have operating temperature range from -20 to +50 ºC.
16. Shall have an Ingress Protection (IP) rating of at least IP65.Shall include a fitted, hard-sided instrument transport case and all instrument-specific cables and accessories required for operation. Batteries and charging equipment shall be provided under Items 24–27.
3 EA, Dual Mode Target:
17. Shall consist of 360-degree active/passive prism that is compatible with the Total Station described above.
18. Shall have a prism constant of +10 mm and an accuracy of 5” (angular deviation), or better.
19. Shall have an active tracking range up to at least 800m and a passive tracking mode up to at least 250m.
20. Shall have a target height of 135mm.
21. Shall operate from an internal Li-Ion battery with a capacity of at least 8 hours of operation.
22. Shall include standard 5/8” thread mounts.
3 EA, Combo Charger Kit:
23. Shall consist of a 4-bay charger kit capable of simultaneously charging 2 ea. batteries for the Total Station and 2 ea. batteries for the Dual Mode Target.
24. Shall include “smart charging” or battery sensing technology for maximizing battery lifespan.
25. Shall include 2 ea. Total Station batteries and 2 ea. Target batteries.
3 EA, Power Supply:
26. Shall include an AC power supply, North American power cord, and 12-volt vehicle-charging adapter compatible with the charger kit.
3 EA, Thumb Release Bipod:
27. Shall consist of a prism pole, or GPS antenna, bipod.
28. Shall include a thumb release clamp locking mechanism for quick positioning of a pole.
29. Shall have independent telescoping legs capable of extending up to at least 6 ft.
30. Shall have fluorescent, yellow-colored legs.
3 EA, Prism Pole:
31. Shall consist of a one-section, telescoping, carbon fiber prism pole.
32. Shall extend up to 8.5 ft. and collapse down.
33. Shall be graduated to read direct for a 135 mm prism height.
34. Shall have external 10ths graduations and inner poles shall be graduated in centimeters and 0.01 ft.
35. Shall include a Twist Lock Vial (TVL) with 40-min vial built-in.
3 EA, Controller for Receiver:
36. Shall be fully compatible with the robotic total station and include a 5-inch color, multi-touch, landscape display supporting finger, stylus, and glove operation.
37. Shall have a resolution of at least 1,280 × 720 pixels and a sunlight-readable display rated at least 800 cd/m².
38. Shall operate on rechargeable Lithium-Ion type batteries.
39. Shall be capable of operating for at least 10 hrs. on a single charge.
40. Shall include a speaker, dual microphones with noise cancellation, and support for USB-C or Bluetooth audio devices.
41. Shall be capable of WWAN Worldwide Network connectivity.
42. Shall have backlit alphanumeric keyboard with QWERTY type key arrangement.
43. Shall include a stylus with tether.
44. Shall include USB ports for power charging and data transfer.
45. Shall have a rear facing camera capable of 16 MP resolution, or better.
46. Shall include an integrated 6-axis accelerometer, magnetic sensor, ambient light sensor, SAR sensor, and keypad & LCD sensor.
47. Shall have integrated GNSS with GPS, GLONASS, BeiDou, Galileo, and QZSS support.
48. Shall have at least 8 GB RAM memory and 128 GB Flash memory.
49. Shall be capable of operating Android 14 operating system.
50. Shall be capable of operating over a range of temperatures from at least -30 to 60o C.
51. Shall have an IP rating of at least IP68 and be MIL-STD-810H certified.
52. Shall have Wi-Fi (dual-band) and Bluetooth communications.
53. Shall be AT&T and Verizon certified.
54. Shall weigh no more than 3.0 lbs. without battery and accessories.
3 EA. Software:
55. Shall be compatible with the Controller described above.
56. Shall provide a perpetual license for field-survey software fully compatible with the controller and robotic total station. The offeror shall identify any included software-maintenance period, update entitlement, subscription, or recurring cost.
57. Shall be optimized for measuring points, stake-out points, lines, arcs, alignments, and scanning.
58. Shall provide graphical routines for calculating points and features.
59. Shall be capable of providing a continuous display of maps or video and forms in a “side-by-side” manner.
60. Shall support coordinate geometry routines.
61. Shall allow user to collect, share, and deliver data and information in the field.
3 EA. Pole Mount:
62. Shall consist of a pole mount that is compatible with the Controller described above.
63. Shall be compatible with 1.25” OD survey poles.
64. Shall include a quick-release feature for one-handed operation.
65. Shall have all metal construction and infinite tilt adjustment.
3 EA. Radio Module:
66. Shall consist of a 2.4 GHz radio module for wireless communication with the Controller described above.
67. Shall include an external antenna.
68. Shall meet MIL-STD-810G for shock and vibration and be rated at IP68.
6 EA. Dual Clamp Tripod:
69. Shall consist of a surveying grade tripod that is compatible with the Total Station described above.
70. Shall include a dual clamp lock.
71. Shall include a 6 5/8” flathead w/2 5/8” center hole.
72. Shall include fiberglass legs that extend up to at least 70” and be able to collapse.
3 EA. Traverse Kit:
73. Shall consist of a traverse kit for the Total Station described above.
74. Shall include a prism base (with optical and optical plummets), a tribrach (without plummet), and a ruggedized carrying case with foam inserts and a handle.
1 EA. On-Site Training:
75. Shall consist of one full business day of on-site training provided by a qualified technical support representative. At a minimum, the training shall:
a. cover system setup, installation, operation, and interfacing of all the various components
b. be tailored to match USGS workflows
c. include vendor travel expenses
d. be conducted at the USGS office in Tacoma, WA
3 EA. Calibration & Documentation:
76. Shall include calibration documentation and service placard stating when the unit was serviced, who performed the work, and when upcoming calibrations are due.
3 EA. Warranty
77. Shall include the manufacturer’s standard warranty which covers both product and software for a period of at least 1 year.
SHIPPING INSTRUCTIONS:
Ship 1/3 qty of every item to each of the following 3 addresses:
USGS
Washington WSC 934 Broadway Ave Suite 300 Tacoma, WA 98402 Attn: Eric Rader
USGS
Northwest Field Office 1350 Slater Road, Suite 5 Ferndale, WA 98248 Attn: William Wright
USGS
Pacific Islands WSC 1845 Wasp Blvd., Bldg. 176 Honolulu, HI 96818 Attn: Heather Jeppesen
File details come from the government source that posted it. Updated .