B01 - Attachment 0003 - TDPL8865541 Rev 20.pdf

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0002 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ N/A C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... N/A D. SPECIFICATIONS AND STANDARDS ............................................... 0003 0005 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. N/A F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... 0006 0006 G. TDPL NOTE LEGEND ............................................................ 0007 0007

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

NC: NON CATEGORIZED SPEC

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, ARDEC, ATTN: RDAR-EIS-P BUILDING 12 ROOM 4, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"N NON-CLASSIFIED

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"A DISTR STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

E 19200 12579607 001 0001 A C 08/04/2009 GEOMETRIC SYMBOLS F/DIMENSIONING TOLERANCING A 19200 12998172 001 0001 A F 03/21/2018 COATINGS, HIGH PERFORMANCE (F/AMMO CNTNR) C 19200 12998366 001 0001 A D 03/21/2018 PAINT, ENAMEL, LOW VOC, ALKYD TYPE (AMMO)

D 19200 7553296 001 0001 A P 10/21/2015 ***OBSOLETE*** USE 13032542 REF

D 19200 7553297 001 0001 A M 10/21/2015 ***OBSOLETE*** USE 13032548 REF

D 19200 7553298 001 0001 A U 10/21/2015 COVER ASSEMBLY

D 19200 7553299 001 0001 A R 02/23/2018 BODY REF

D 19200 7553300 001 0001 A N 01/18/2018 COVER

D 19200 7553301 001 0001 A K 02/23/2018 BOTTOM

D 19200 7553302 001 0001 A K 10/21/2015 GASKET, COVER

D 19200 7553303 001 0001 A J 02/23/2018 RETAINER, GASKET

C 19200 7553304 001 0001 A J 02/23/2018 HANDLE, COVER

B 19200 7553305 001 0001 A J 01/26/2018 CLIP, COVER HANDLE

D 19200 7553306 001 0001 A L 01/18/2018 LATCH

C 19200 7553308 001 0001 A G 10/21/2015 HINGE, COVER

C 19200 7553309 001 0001 A L 01/18/2018 HINGE, BODY

C 19200 7553310 001 0001 A K 02/23/2018 HANDLE, END

C 19200 7553311 001 0001 A J 02/23/2018 LINK, LATCH

C 19200 7553312 001 0001 A L 02/23/2018 PIN, HINGE

D 19200 7553313 001 0001 A G 10/21/2015 HASP

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 19200 7580052 001 0001 A M 02/23/2018 LINK, COVER HANDLE

F 19203 8865541 001 0001 A M 02/03/2012 SHIPPING STORAGE CNTNR:PA19 ASSEMBLY

F 19203 8865542 001 0001 A H 09/24/1996 BODY ASSEMBLY

F 19203 8865543 001 0001 A C 01/18/1991 BODY

D 19203 9217654 001 0001 A B 07/26/1982 COVER

B 19203 9218051 001 0001 A B 07/26/1982 HINGE,COVER

B 19203 9218386 001 0001 A C 05/08/1984 PIN, HINGE

B 19203 9218387 001 0001 A B 07/26/1982 HINGE, BODY

F 19203 9252724 001 0001 A L 04/21/2010 CONTAINER,AMMUNITION,METAL:PA70 ASSEMBLY REF

A 19200 9347108 001 0001 A G 01/26/2018 PAINT, (FOR AMMUNITION CONTAINERS)

D 19200 9354466 001 0001 A L 04/21/2010 CONTAINER, AMMUNITION, METAL, PA124 REF

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

A-A-00208 D 10/01/2013 INK,MARKING,STENCIL,OPAQUE(POROUS/NON-POROUS) *

A-A-208 (REPLACED BY A-A-00208 ) *

A-A-59383 C 1 01/31/2017 MARKING MEDIA,OPAQUE(POROUS/NON-POROUS SURFACES) *

MIL-A-2550 A B 1 2 10/18/2013 AMMUNITION, GENERAL SPEC FOR...NFND *

Q MIL-DTL-11195 A H 1 08/23/2016 ENAMEL, LUSTERLESS, FAST DRY, VOC COMP *

MIL-DTL-3060 A G 5 04/17/2019 BOXES,SMALL ARMS AMMO-M19A1/M2A1 *

MIL-B-3060 (REPLACED BY MIL-DTL-3060 ) *

Q MIL-DTL-53022 A F 12/01/2019 PRIMER,EPOXY COATING,CORROSION INHIBITING *

Q MIL-DTL-53030 A D 1 12/20/2017 PRIMER COATING, EPOXY, WATER BASED LEAD *

MIL-DTL-53039 A E 2 09/10/2018 COATING,ALIPHATIC POLYURETHANE,SINGLE *

MIL-DTL-53084 B 1 12/03/2015 PRIMER, CATHODIC ELECTRODEPOSITION, CAR *

Q MIL-DTL-64159 A B 1 11/16/2015 CAMOUFLAGE COATING, WATER DISPERSIBLE ALGENT *

Q MIL-E-52891 A B 3 06/17/2015 ENAMEL, LUSTERLESS, ZINC PHOS...NFND *

Q MIL-PRF-23377 A K 1 09/12/2019 PRIMER COATINGS, EPOXY, HIGH-SOLIDS *

Q MIL-PRF-85582 A E 1 09/13/2019 PRIMER COATINGS: EPOXY, WATERBORNE *

MIL-STD-130 A N 1 08/26/2019 IDENTIFICATION MARKING OF U.S. MILITARY *

MIL-STD-171 A F 05/31/2011 FINISHING OF METAL AND WOOD SURFACES *

MIL-W-12332 A A 3 08/29/1994 WELDING, RES,SPOT/SEAM/PJTN F/ FAB ASSY *

TT-C-490 A G 09/09/2019 CHEMICAL CONVERSION COATINGS *

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASTM-A1064/A1064M A 11/15/2018 STD F/STEEL/WELDED WIRE REINFORCEMENT,PLAIN/DEFO **

ASTM-A108 - 11/01/2018 STANDARD SPEC F/STEEL BAR **

ASTM-A109/A109M - 11/01/2018 STANDARD SPEC FOR STEEL, STRIP, CARBON **

ASTM-A109 (REPLACED BY ASTM-A109/A109M ) **

ASTM-A109/A109M - 11/01/2018 STANDARD SPEC FOR STEEL, STRIP, CARBON **

ASTM-A116 - 11/01/2016 STD SPEC FOR METALLIC-COATED STEEL **

ASTM-A121 A - 05/01/2019 STANDARD SPEC FOR METALLIC-COATED STEEL **

ASTM-A227/A227M - 09/01/2017 STEEL WIRE,COLD-DRAWN FOR MECH SPRINGS **

ASTM-A228/A228M - 09/01/2018 STANDARD SPEC F/STEEL WIRE **

ASTM-A29/A29M A - 12/01/2016 STEEL BARS,CARBON & ALLOY,HOT WROUGHT **

ASTM-A568/A568M A 11/01/2019 STEEL,SHT,CARBON,H STR,L ALY,HOT & COLD **

ASTM-A568 (REPLACED BY ASTM-A568/A568M ) **

ASTM-A568/A568M A 11/01/2019 STEEL,SHT,CARBON,H STR,L ALY,HOT & COLD **

ASTM-A576 - 11/01/2017 STANDARD SPEC STEEL BARS, HOT-WROUGHT **

ASTM-A853 - 09/01/2019 STANDARD SPEC F/STEEL WIRE, CARBON **

ASTM-B117 - 11/01/2019 STANDARD PRAC F/SALT OPER SALT SPRAY **

ASTM-B633 - 03/01/2019 ELECTRODEPOSITED COATINGS ZINC IRON STEEL **

ASTM-D2000 A - 06/01/2018 RUBBER PRODUCTS IN AUTOM APPL, CLASS **

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-D2794 - 01/01/2019 RESISTANCE OF ORGANIC COATINGS TO EFFECT **

ASTM-D3359 - 02/01/2017 STANDARD TEST METHOD F/MEASURING ADHESIVE **

ASTM-D3363 - 03/01/2012 STANDARD TEST METHOD F/FILM HARDNESS **

ASTM-D522/D522M - 07/01/2017 MANDREL BEND TEST OF ATTACHED ORGANIC COATINGS **

ASTM-D523 - 05/01/2018 METHOD OF TEST FOR SPECULAR GLOSS **

ASTM-G155 - 06/01/2013 STD PRAC F/OPERATING XENON ARC LIGHT APP **

AWS-A2.4 - 01/01/2012 STANDARD TEST SYM WELD NON-DESTRUCTIVE **

AWS-A2.0 (REPLACED BY AWS-A2.4 ) **

AWS-A3.0M/A3.0 A - 01/01/2020 STANDARD WELDING TERMS AND DEFINITIONS **

AWS-A3.0 (REPLACED BY AWS-A3.0M/A3.0 ) **

SAE-AMS-QQ-P-416 E 01/01/2016 PLATING, CADMIUM (ELECTRODEPOSITED) **

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

FED-STD-595 (REPLACED BY SAE-AMS-STD-595 ) ***

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

PREFIX DRAWING/DOCUMENT AFFECTED NUMBER OF ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER IMAGES NUMBER CODE DATE CLASS

OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

NCAGE A-A-59383 1 R19K2023 A 12/04/2019 N

05/06/2020 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 7

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 8865541:19203

DOCUMENT NUMBER : F 8865541:19203

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-00-145-0051

SHIPPING STORAGE CNTNR: PA19 ASSEMBLY REQUEST/PRON ID: P20C36

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.