B-4372 Amendment 2 Wood Chippers.docx
DOCX document 20 KB Posted
- Attached to
- DNR - Wood Chippers
- Solicitation number
- 19-422DNR-LNDMG-B-4372
- Issued by
- Madison County, Illinois
About this file
This document is an amendment to an Invitation for Bid (IFB) issued by the Illinois Department of Natural Resources (IDNR) for the procurement of wood chippers under the LMPC5658 Open Market Bid 19-422DNR-LNDMG-B-4372 contract. The amendment revises the specifications in Section 1.2, including requirements for a minimum 125 horsepower engine, 48-inch in-feed table width, manufacturer's safety system, cutting and discharge system with 12-inch material capacity and 270-degree chute rotation, and hydraulic and electrical systems. The wood chippers must be newly manufactured, and the contract will include the manufacturer's standard warranties. The bid opening date remains February 1, 2019, at 2:00 PM.
The document does not provide details on pricing terms, set-asides, incumbents, funding requirements, or other salient information. The wood chippers are being procured through an open market bid process for the IDNR.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B-4372 NOA~1.pdf | ||
| LMPC5658 Wood Chippers Invitation For Bid_Amended2.doc | DOC document | |
| Forms A Section V.18.1~21.docx | DOCX document | |
| Forms B Section V.18.1~34.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF ILLINOIS
INVITATION FOR BID - AMENDMENT
Illinois Department of Natural Resources IDNR FY19 Land Management Wood Chippers
LMPC5658
Open Market Bid 19-422DNR-LNDMG-B-4372
In the above, Section 1.2 is amended to:
Section 1.2. is replaced in its entirety by the following:
1.2. SUPPLIES AND/OR SERVICES REQUIRED: Each wood chipper shall have:
1.2.1. Minimum 125 horsepower engine, with 245 – 265 ft- pounds of Torque.
1.2.2. In-feed table width of Minimum 48 inch.
1.2.3. A manufacturer’s Safety System, with a Top and Bottom Feed Stop Bar and Variable Sensitivity.
1.2.4. Four Positions: Emergency, Stop, forward and reverse
1.2.5. A Cutting and Discharge System with:
1.2.5.1. Material Capacity – Minimum 12 inches.
1.2.5.2. Chute Rotation Angle – Minimum 270 degrees.
1.2.5.3. Rotational Lock.
1.2.5.4. Drum and/or Disk
1.2.6. Hydraulic System with:
1.2.6.1. Tank capacity – 10 gallons minimum.
1.2.6.2. Directional control.
1.2.7. Electrical System:
1.2.7.1. Standard Gauges - Fuel, hour gauges, voltage, water temperature, oil pressure, tachometer gauges, multifunction display.
1.2.7.2. LCD Display.
1.2.7.3. LED Trailer Lights.
1.2.8. Wood chippers shall be newly manufactured; used or refurbished equipment is not acceptable.
1.2.9. Wood chippers shall include all standard manufacturer’s warranties.
For procurements conducted in BidBuy, the State may include in this contract the BidBuy Purchase Order as it contains the agreed Supplies and/or Services.
|_| If checked, see the attached BidBuy Purchase Order for a Description of Supplies and/or Services.
All other specifications remain unchanged.
The Bid opening date of February 1, 2019, at 2:00 PM will be in effect.
image1.jpeg
File details come from the government source that posted it. Updated .