B-33843 JPMC Snow Plows amd Ice Handling Equip. Exhibits A-B~1.pdf
PDF 182 KB Posted
- Attached to
- JPMC Snow Plows and Ice Handling Equip.
- Solicitation number
- 23-416CMS-BOSS4-B-33843
- Issued by
- Illinois
About this file
This document is a set of specifications for an 8-foot-6-inch commercial grade snow plow for a two-axle dump truck, issued by the Illinois Department of Human Services (IDHS). The snow plow must be new, of current design and manufacture, and a production model. It must have a plastic hopper to help alleviate corrosion in the truck bed and provide longevity. The equipment will be tested for proper installation and function prior to delivery. The state reserves the right to waive minor informalities or technical variances that may be restrictive to a given manufacturer if it is in the best interest of the state.
The specifications do not provide details on pricing, set asides, incumbents, funding requirements, or other salient information. The document appears to be focused solely on the technical requirements for the snow plow equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Forms A Section V.23.2 ~1.docx | DOCX document | |
| Forms B Section~8.docx | DOCX document | |
| Utilization Plan Version 21.0~22.pdf | ||
| B-33843JPMC Snow Plows and Ice Handling Equip Pre-Bid Conference Information .pdf | ||
| Notice of Electronic Submission Only v.22.1 14.pdf | ||
| B-33843 BEP vendors.xlsx | XLSX spreadsheet | |
| B-33843 Snow Plows and Ice handling Equipment IFB updated 2-6.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
IDHS SNOW PLOW, Commercial Grade 8 foot-6 inches for 2 Axle Dump Truck
Exhibit A IDHS Specifications for SNOW PLOW, 8 FOOT-6 INCHES for Two Axle Dump Truck
The following specifications describe the minimum requirements for an Illinois Department of Human Services (IDHS) 8 FOOT-6 INCHES snow plow for a Two Axle Dump Truck. The equipment shall be new, of current design and manufacture, and a production model. Any additions, deletions, or variations from the following specifications must be noted or the equipment will be rejected. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise noted.
Parts and service for the equipment should be readily available within the State of Illinois.
Unless otherwise specified, the equipment shall be complete in all parts and ready for immediate use upon delivery.
Make:
Model:
Manufacturer:
The State reserves the right to waive minor informalities, deficiencies, or technical variances which by their nature are restrictive to a given manufacturer, if in its’ judgment, it would be in the best interest of the State.
Snow plow must have a plastic hopper, so as to help alleviate the corrosion issue in the beds and providing longevity on the plow.
All Equipment to be tested for proper installation and function prior to delivery.
Commercial Grade 8’-6” w/ snow deflector, power up/down, angle, Plow Lights.
IDHS SNOW PLOW, 8 FOOT 6 INCH Commercial Grade C-8 Series for a Class 3 Dump Truck
Exhibit B Illinois Department of Human Services (IDHS) Specifications for SNOW PLOW, 8 FOOT 6 INCH Commercial Grade C-8 Series for a Class 3 Dump Truck
The following specifications describe the minimum requirements for an (IDHS) 8 FOOT-6 INCHES snow plow for a Two Axle Dump Truck. The equipment shall be new, of current design and manufacture, and a production model. Any additions, deletions, or variations from the following specifications must be noted or the equipment will be rejected. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise noted.
Parts and service for the equipment should be readily available within the State of Illinois.
Unless otherwise specified, the equipment shall be complete in all parts and ready for immediate use upon delivery.
Make:
Model:
Manufacturer:
The State reserves the right to waive minor informalities, deficiencies, or technical variances which by their nature are restrictive to a given manufacturer, if in its’ judgement, it would be in the best interest of the State.
Snow plow must have a plastic hopper, so as to help alleviate the corrosion issue in the beds and providing longevity on the plow.
All Equipment to be tested for proper installation and function prior to delivery.
IDHS SNOW PLOW, 8 FOOT 6 INCH Commercial Grade C-8 Series for a Class 3 Dump Truck
File details come from the government source that posted it. Updated .