Attachment D - Technical Volume Template_CCPC.xlsx

Instructions

The Quoter may not alter any data that the Government has already included in this template.

PG 1 - TH Carts

EFFECTIVE PIXELS 3,264(H) x 2,244 (V) FRAME RATE 30 fps RESOLUTION HDMI: 1920 x 1080 / 1280 x 720 RGB: 1920 x 1080 / 1280 x 720 / 1024 x 768 USB: 1920 x 1080 / 1280 x 720 / 1600 x 1200 / 1024 x 768 / 640 x 480 Minimum ZOOM 12x Optical LENS F3.2-3.6, f=4.0 mm- 48.0 mm SHOOTING AREA 430mm x 320mm FOCUS One-push Auto WHITE BALANCE Auto / Cloudy / Sunny / Fluorescent light / Incandescent light / Shade / Twilight / Fluorescent light (warm color)

USB IMAGE OUTPUT

DIGITAL ZOOM 16x

ANNOTATION

BRIGHTNESS CONTROL Manual INPUT SELECTION Main / External OUTPUT TERMINALS RGB output mini D-sub 15-pin connector, female x 1 minimum of 1 HDMI output terminal Line Out terminal 3.5 mm-diameter stereo mini jack x 1 INPUT TERMINALS RGB input mini D-sub 15-pin connector, female x 1 Minimum of 1 HDMI input terminal Mic In/Line In terminal (shared), 3.5 mm-diameter stereo mini jack x1 EXT. CONTROL TERMINAL USB device (2.0 compliant) (UVC Compliant) Type-B receptacle x 1 MEMORY INTERFACE SD memory card slot x 1, USB host (2.0 compliant) Type A receptacle x 1 Lighting: ILLUMINATION LAMP White LED

PG 2 - TH Imaging Equipment

• Small pupil capability to minimum 3.3mm when selected

• True color photography of the human retina and external eye

• High resolution digital retinal images with minimum 24 Megapixel without requiring pupil dilation

• Capable of optical 45-degree and 30-degree field of view image capture

• Anterior segment Imaging capability to facilitate external eye photos

• Stereo photography sequencing capture or software capable to create stereo pair

• Internal eye fixation lamp with minimum 9 fixation position setting and mosaic or panoramic function to facilitate the imaging protocol for Teleretinal imaging

• Includes Auto focus and Auto Capture that can be turned on or off

• Incorporated digital image filters and internal firmware to allow color, red-free, cobalt and fundus autofluorescence imaging

• Color monitor allowing for easy viewing of images

• Motorized Chinrest to adjust patient height

• Minimum Focus Adjustment range without compensation lens: -10 Diopter to +12 Diopter

• Minimum Focus Adjustment range with negative/minus compensation lens: -12 Diopter to -30 Diopter

• Minimum Focus Adjustment range with positive/plus compensation lens: +13 Diopters to +30 Diopter

• Flash control setting to adjust for lower/higher flash levels

• DICOM compliant and VA Network capable

• FDA cleared •3 Year warranty

Must be: Molded, gold plated connectors, EMI/RFI Protection, 28 gauge

Olympus M10 Mark III (or later) Key Features (or better):

DermLite Foto X Key Features

• Must have Polarized and non-polarized ability

• Must have variable and multiple brightness levels and settings

• USB Charger

• Compatible with disposable covers for infection control.

• Rechargeable battery contained within device.

• Removable faceplate for easy cleaning with isopropyl alcohol or mild soap and water to clean

Must be Disposable snap-on shield

• Ancillary to/must be compatible with Icare ic100 tonometer

• Ancillary to/must be compatible with Icare ic100/ic200/TAO1i tonometers

• Non-anesthetic and non-aerosolization measurement capability

• Single-use sterilized disposable probes

• Measurement range minimum 7-50 mmHg +/- 1mmHg tolerance

• Single and rapid-series measurement capability

• 16.1MP Four Thirds Live MOS Sensor

• Dual Quad-Core TruePic VIII Processor

• UHD 4K30 Recording; Clips Video Mode

• 2.36m-Dot 1.23x Electronic Viewfinder

• 3.0" 1.04m-Dot Tilting Touchscreen LCD

• In-Body 5-Axis Image Stabilization

• 121-Point Contrast-Detect AF System

• Up to 8.6 fps Shooting and ISO 25600

• Non‐mydriatic, high resolution true color fundus photography with 45-degree fields and mosaic or panoramic viewing function

• Color and IR photography for anterior segment and fundus

• Automated system with single-button OCT capture capability

• Anterior segment scanning

• Photographable diameter of pupil for fundus: 4.0 or more; small pupil capability of 3.3mm or smaller; fundus tomogram minimum pupil of 2.5mm

• Multi-fixation position settings for internal, peripheral, and/or external image capture

• OCT Scan range minimum of 3-12 mm +/-5%

• OCT Scan speed minimum of 50,000 scans per

• Fundus Resolution of at least 60 lines/mm or more for center, 40 lines/mm or more for middle( r/2), 25 lines/mm or more for middle (r) and 5 lines/mm or more for center IR photography.

• DICOM compliant and VA Network capable

• FDA cleared

• 3 Year warranty

• Ancillary to/compatible with TopCon Fundus Camera

• Includes Computer/Monitor with EZ-Lite 2 Software

• DICOM compatible

• High resolution digital retinal images with minimum 16 Megapixel without requiring pupil dilation

• Small pupil capability to 3.3mm when selected

• True color photography of the human retina and external eye

• Capable of optical 45-degree and 30-degree field of view image capture

• Anterior segment Imaging capability to facilitate external eye photos

• Stereo photography sequencing capture or software capable to create stereo pair

• Internal eye fixation lamp with minimum 9 fixation position setting and mosaic or panoramic capability to facilitate the imaging protocol for Teleretinal imaging

• Auto focus and Auto Capture that can be turned on or off

• Incorporated image filters and internal firmware to allow color, red-free, and fundus autofluorescence imaging

• Color monitor allowing for easy viewing of images

• Motorized Chinrest to adjust patient height

• Minimum Focus Adjustment range without compensation lens: -13 Diopter to +12 Diopter with +/- 1 Diopter tolerance

• Minimum Focus Adjustment range with negative/minus compensation lens: -12 Diopter to -33 Diopter +/- 1 Diopter tolerance

• Minimum Focus Adjustment range with positive/plus compensation lens: +9 Diopters to +40 Diopter +/- 1 Diopter tolerance

• Flash control setting to adjust for lower/higher flash levels

• DICOM compliant and VA Network capable

• FDA cleared

• 3 Year warranty

• Minimum 45-degree field of view

• Minimum 9 internal fixation targets

• Anterior imaging module

• Minimum 8GB internal memory

• Minimum 4” LCD display with minimum resolution 800x480 pixel, 16.7 M colors

• Image sensor minimum 5.0 Megapixels

• Minimum image format: JPEG

• Minimum video format: MPEG-4

• Minimum USB connectivity: USB 1.1, USB 2.0 and 3.0

• WLAN connectivity: 802.11 bgn, wpa2

• Operating system compatibility: Microsoft Windows 10

• Recharge capable, inclusion of Li-ion battery

• Inclusion of charging station with memory stick/PC software/instructions for use

• DICOM compliant and VA network connectivity capable

• On-site installation and training

• Height-adjustable stool, with back

• Anti-microbial black vinyl

• Pneumatic seat height adjustment

• Must swivel 360 degrees

• Seat depth adjustment"

• Hooded double / twin wheel design with 2" wheels

• Fits into most chair bases with a standard 7/16" x 7/8" (11mm x 22mm) wire grip ring mounting stem

• Hard nylon wheel - Ideal for use on carpet and plastic chair mats

• Must accommodate weights of at least 75 lbs. per caster

Adaptive Column Positioning (ACP Technology) allows for positioning the column with a center; far-left or right, mid-left or mid-right column position.

Must be electronically height adjustable Must have a minimum tabletop height of 27.5" with Casters installed and a Maximum of 36".

Must have a minimum of 275 lbs. lift capacity.

• Includes minimum standard optotypes: 17 Letter Set, 8 Letter Set, Sloan, Tumbling E, Landolt C, O Landolt C, HOTV, Numbers

• Includes minimum children optotypes: Kolt, Children’s Shapes, Allen

• Includes minimum presentation options: Single Line, Double/ Same, Double/ Decreasing, Triple Same, Triple Decreasing, Quadruple Same, Quadruple Decreasing, Single Letter, Column, Column Uneven

• Includes minimum other: Xcyl Crowding Dots, Astigmatic “Wheel”, Fixation Dot, Horizontal Disperity, Vertical Disperity, Worth 4 Dot, Crowding Bar, Suppression, Red Green Filter

• Display: 24 in. (60 cm) LED backlit LCD (1920×1080 Pixels)

• Illumination capability: max of 220 cd/m2, photopic Illumination 85 cd/m2, mesopic Illumination of 3 cd/m2

• Refraction Range: 1.83 m (6 ft) – 7.5 m (24.6 ft)

• Communication minimum of RS232 Serial Port, 2 USB Ports Capability to be linked by wired or wireless connection to a digital Phoroptor Remote Control: Infrared, battery operated Inclusion of :

(1) Remote control

(2) AAA (LR03) batteries

(2) Power cords [0.6 m (3 ft.) length and 3 m (10 ft. length]

(1) Wall mount bracket with screws

(1) Wall mount adaptor

• 7” LCD high-resolution color monitor, 1920 x1200 pixels

• 5 m refraction at 80cm capability

• Visual acuity range minimum 0.1 to 2.0 – 20/500 to 20/10;

Connectable via RS232-C or IR or WIFI

• Table parameters: adjustable height capability 26.57 to 36.42 in

• Extends screen out up to 25" (64 cm) with an extension range of 18" (46 cm)

• Cable management feature.

• Mounting Options: Desk Clamp attaches to surface edge or Grommet Mount attaches through surface holes.

• Weight Capacity: from 5 to 25 lbs.

• Tilt Range: minimum of 70 degrees backward, and 5 degrees forward

• Must be compatible with proposed all in one PC.

• Table dimension 59” x 27” x 29” with +/- 2” tolerance

• Wheelchair accessible with ADA compliance

• Electric adjustable height with synchronized legs and included power strip

• Vertical tabletop height adjustment range between 25 inches (low/retracted) and 45 inches (high/full stroke)

• Table dimension 36” x 24” x 29” with +/- 2” tolerance

• Wheelchair accessible with ADA compliance

• Electric adjustable height with synchronized legs and included power strip

• Vertical tabletop height adjustment range between 25 inches (low/retracted) and 45 inches (high/full stroke)

• Minimum table load capacity 300 pounds

• Side lever elevation control

• Seat size 15” and back size 10” x 15” with +/-1” tolerance

• Pneumatic elevation stroke of 8" with low/retracted height 19” and extended height 27” with +/-1” tolerance

• Back adjustment range of 3” with +/- 1” tolerance

• Weight capacity of 250 lbs.

• Bacteriostatic fabric

• 5 casters safety design

• Side lever elevation control

• Seat size 18 x 17” and back size 12” x 17” with +/-1” tolerance

• Pneumatic elevation stroke of 8" with low/retracted height 19” and extended height 27” with +/-1” tolerance

• Back adjustment range of 3” with +/- 1” tolerance

• Weight capacity of 250 lbs.

• Bacteriostatic fabric

• 5 casters safety design

- Portable, sturdy stand

- Spring balanced arm for phoroptor with 17" vertical travel

Memory card type:

32GB Extreme PRO UHS-II SDHC Memory Card UHS-II / U3 / Class 10 Max. Read Speed: 300 MB/s Max. Write Speed: 260 MB/s

• Pre-installed Windows 10 Professional 64-bit

• 1TB 7200rpm drive

• Intel Core i7-8700 3.2GHz 6-core processor (65W)

• 16GB (1x16GB) DDR4 2666 SODIMM RAM

• Intel Wireless 9560 802.1a/b/g/n/ac 2x2 with Bluetooth 5

• Fixed 2 Megapixel FHD low-light Webcam with microphone

• 2-watt internal Stereo Speakers

• Energy Star Certified

• 9.5mm DVD-Writer Internal

• Wired USB Keyboard

• Wired USB Mouse with scroll wheel

• Warranty 3/3/3 (year)

• 23.8" screen

• Able to read pupil sizes from 2.0 to 6mm.

Table top or portable will be considered; prefer the smallest footprint possible while maintaining accuracy

• Large Range of measurements possible to accommodate all potential patients’ refractive error where Sphere is at least -10D to +10 diopters

• Cylinder 0 to- +/6 diopters

• Axis 0 to 180 degrees

• Has some type of literature (e.g. white paper, published peer review references) demonstrating the accuracy of auto-refraction in comparison to a clinical standard such as retinoscopy, manifest refraction, etc.

• Displays cataract opacity images of the eye or corneal distortion

• Systems shall be manufactured and installed in accordance with applicable UL, NFPA, IEC, and VA codes, standards, and regulations.

• System shall connect to AC 100 to 240 V +- 10% 50/60 Hz

• System shall be placed on the automatic wheelchair accessible table.

• Systems shall require minimum maintenance.

Auto refractometer Measurement Range Sphere -20.00 to +20.00 D (VD = 12mm) (0.12 / 0.25 D increments) Cylinder 0 to 12.00 D (0.12 / 0.25 D increments) Axis 0 to 180° (1° / 5° increments) Minimum measurable pupil diameter ø2 mm Auto keratometer Measurement Range Curvature Radius 5.00 to 13.00 mm (0.01 mm increments…