Attachment C_Existing Fire Alarm System Equipment Schedule_2026-04-02.pdf
PDF 191 KB Posted
- Solicitation number
- S-24800-00015913
- Issued by
- Clatsop County, Oregon
About this file
This is an Equipment Schedule attachment for the Camp Rilea Koski Lodging Fire Alarm System Replacement project issued by the Oregon Military Department. The project involves the complete replacement of fire alarm systems in two buildings (7299 and 7300) at Camp Rilea in Warrenton, Oregon. The existing systems are conventional, non-addressable systems installed circa 1999 that are considered obsolete and beyond typical service life. The new system must be fully addressable, code-compliant, and include integrated carbon monoxide detection to meet current code requirements for transient lodging occupancies. The existing equipment inventory across both buildings includes approximately 2 fire alarm control panels, 4 batteries, 24 smoke detectors, 10 manual pull stations, 5 heat detectors, and 10 horn/strobes. The document emphasizes that all quantities are approximate and provided for informational purposes only, with contractors required to independently verify all existing conditions, device locations, wiring, and system configurations prior to bidding.
The contractor bears full responsibility for field verification of all equipment and system components before design and installation. The scope of work includes removal and replacement of all existing fire alarm system components, whether specifically identified in the Equipment Schedule or not. The document explicitly states that no adjustment in contract price will be made due to discrepancies between the equipment schedule and actual field conditions discovered during the work. All work required to provide a complete, code-compliant, and fully functional system must be included in the base bid, regardless of whether such work is identified in the attachment. The equipment schedule is not to be used for reliance in bidding purposes, as it represents only available inspection reports and limited observations that may not represent all existing components or system configurations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Project #260017C001 Camp Rilea Koski Lodging Fire Alarm Replacement Att C
ATTACHMENT C – Existing Fire Alarm System Equipment Schedule
(For Informational Purposes Only – Contractor to Verify All Conditions)
1. Purpose
This Equipment Schedule is provided for informational purposes only to assist Bidders in understanding general existing fire alarm system conditions.
The information is based on available inspection reports and limited observations and may not represent all existing components, conditions, or system configurations.
The Contractor shall independently verify all existing conditions, quantities, device locations, wiring, and system configuration.
The Contractor shall not rely on this Equipment Schedule for bidding purposes. All Work required to provide a complete, code-compliant, and fully functional system shall be included in the Base Bid, regardless of whether such Work is identified in this Attachment.
2. General Notes
Device locations are approximate and not intended for installation reference.
Existing system wiring and pathways are not fully documented.
The Contractor shall perform a complete ield veri ication prior to design and installation.
3. Existing System Overview
The existing fire alarm systems in Buildings 7299 and 7300 are conventional, non-addressable systems installed circa 1999.
The systems are considered obsolete and at or beyond typical service life. The systems do not provide carbon monoxide (CO) detection and have documented deficiencies in initiating devices.
The existing systems do not meet current code requirements for transient lodging occupancies.
This project requires complete system replacement with a fully addressable, code-compliant fire alarm system with integrated carbon monoxide (CO) detection.
4. BUILDING 7299 – SMALL KOSKI
4.1. Control Equipment
Item No. Equipment
Description Manufacturer Model Approx.
Qty Notes
7299-01 Fire Alarm Control Panel (FACP)
Edwards Firewatch II 1 Installed ~1999
7299-02 System Disconnect
N/A Breaker 1 Panel C, Ckt #29
7299-03 Batteries Duracell DURA12-8F 2 Installed 4/15/2022
4.2. Initiating Devices
Item No. Equipment Description
Manufacturer Model Approx.
Qty
Notes
7299-04 Smoke Detector (Photo/Heat Combination)
System Sensor 2451TH 8 Hallways & exits
7299-05 Manual Pull Station (Single Action)
Edwards/Faraday F1GT 5 Various exits
7299-06 Heat Detector (Fixed Temp)
Edwards 281B 2 Mechanical rooms (defective)
4.3. Notification Appliances
Item No. Equipment
Description Manufacturer Model Approx.
Qty Notes
7299-07 Horn/Strobe Faraday N/A 4 Installed ~1999
5. BUILDING 7300 – LARGE KOSKI
5.1. Control Equipment
Item No. Equipment Description
Manufacturer Model Approx.
Qty
Notes
7300-01 Fire Alarm Control Panel (FACP)
Faraday Firewatch II 1 Installed ~1999
7300-02 System Disconnect
N/A Breaker 1 “A” Ckt #29
7300-03 Batteries Duracell DURA12-8F 2 Installed 4/15/2022
5.2. Initiating Devices
Item No. Equipment Description
Manufacturer Model Approx.
Qty
Notes
7300-04 Smoke Detector (Photo/Heat Combination)
System Sensor 2451TH 16 Hallways & rooms
7300-05 Manual Pull Station (Single Action)
Faraday F1GT 5 Various exits
7300-06 Heat Detector (Fixed/Combination)
Edwards 281B Series 3 Mechanical rooms (defective)
5.3. Notification Appliances
Item No. Equipment Description
Manufacturer Model Approx.
Qty
Notes
7300-07 Horn/Strobe Faraday N/A 6 Installed ~1999
6. SUMMARY (BOTH BUILDINGS)
Equipment Type Approx. Total Qty
Fire Alarm Control Panels 2
Batteries 4
Smoke Detectors 24
Manual Pull Stations 10
Heat Detectors 5
Horn/Strobes 10
Note: Summary quantities are approximate and provided for general reference only.
Contractor shall determine actual quantities required to meet code and system design requirements.
7. CONTRACTOR RESPONSIBILITIES
Quantities provided are approximate and based on inspection reports.
Not all existing devices or system components may be shown.
The Contractor shall ield verify all devices, locations, wiring, and system con iguration.
The Contractor shall include removal and replacement of all existing ire alarm system components, whether or not speci ically identi ied in this Attachment.
Any existing devices not listed but encountered shall be included in the Work.
No adjustment in Contract Price will be made due to discrepancies between this Equipment Schedule and actual ield conditions.
File details come from the government source that posted it. Updated .