Attachment_C_-_Corrections_Complex_Vendor_Access_Requirements.pdf

PDF 345 KB Posted

Attached to
Commercial Doors and Gates Preventative Maintenance and Repairs for Facilities Management
Solicitation number
Y26-1017
Issued by
Orange County, Orlando City, Florida

About this file

This document is Special Conditions for Vendors Working at the 33rd District/Corrections Complex, establishing vehicle entry procedures and requirements for vendors providing services at a corrections facility. Vendors must utilize tool carts located at the Tool Inventory Gate (TIG) to transport tools and materials, with the tool cart key included on the TIG key ring. Items too large for the carts may be delivered directly to job sites, provided the vendor vehicle is subsequently returned and parked at the Tool Inventory Gate. Vendor vehicles may remain on-site only when operationally necessary (such as for air compressors, lifts, or winches) and only with documented approval from a Perimeter Security Unit (PSU) supervisor. When such approval is granted, the approving PSU supervisor's name must be documented in the Incident Management System (IMS) along with all required vehicle information, and the supervisor's name must be recorded on the vehicle pass. No vehicle is permitted beyond the vehicle sally-port without documented authorization from a PSU supervisor.

Vehicles that cannot be fully searched in accordance with established procedures will be denied entry to the facility. Vehicle entry will not be permitted solely for transporting passengers into the secure compound. These requirements take effect immediately and are mandatory for all vendors working at the Corrections Complex, ensuring security compliance and operational control over facility access.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SPECIAL CONDITIONS FOR VENDORS WORKING AT 33rd DISTRICT / CORRECTIONS

COMPLEX

The following vehicle entry procedures and requirements are applicable to vendors providing services at the Corrections Complex and shall take eƯect immediately:

Vendor Access

Vendors must use the tool carts located at the Tool Inventory Gate (TIG) to transport tools and materials. The tool cart key has been added to the TIG key ring.

Items that are too large for the carts may be delivered directly to the job site;

however, the vendor vehicle must then be returned and parked at the Tool Inventory Gate.

Exhibit 1:

Vehicles Remaining On-Site Vendor vehicles may remain at a job site only when operationally necessary (e.g., air compressors, lifts, winches) and only with approval from a Perimeter Security Unit (PSU) supervisor.

When approval is granted:

The approving PSU supervisor’s name must be documented in IMS along with all vehicle information required by the SOP.

The supervisor’s name must be recorded on the vehicle pass.

No vehicle will be permitted beyond the vehicle sally-port without documented authorization from a PSU supervisor.

Attachment C

Vehicle Searches and Denied Entry

Any vehicle that cannot be fully searched in accordance with established procedures (see attached “turn around” image) will be denied entry.

Exhibit 2 turn around” image:

Vehicle entry will not be permitted for the sole purpose of transporting passengers into the secure compound.

File details come from the government source that posted it. Updated .