Attachment C - Cash-Pak Free Fall Drop.pdf
PDF 8 KB Posted
- Attached to
- Currency Packaging Film and Bundle Band Federal contract opportunity
- Solicitation number
- 2031ZA20R00030
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 2031ZA20R00030 0001.pdf | ||
| Questions and Answers Currency Packaging Film Amendment 0001.pdf | ||
| Attachment A - Specification for Currency Packaging.pdf | ||
| Attachment E Price Schedule.pdf | ||
| 2031ZA20R00030 Final.pdf | ||
| Attachment D- Cash-Pak drawing 30083.pdf | ||
| Attachment B - Vendor Affixed Barcode Labels edit 12-4-19.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2031ZA20R00030 Attachment C Cash-Pak Free Fall Drop
Attachment A1
BUREAU OF ENGRAVING AND PRINTING
Free Fall Drop Test
Apparatus. Any suitable apparatus or method may be used that conforms to the following requirements:
1) Permits the package to be placed in a position prior to release that will assure free unobstructed fall to impact the package at the orientation and in the direction required.
2) Permits accurate and convenient control of the height of the drop.
3) Utilizes lifting devices or methods that will not damage the package.
4) Provides an instantaneous release mechanism.
5) Provides a rigid and level surface with a solid mass of concrete, steel, or stone sufficient to absorb all shock without displacement.
Procedure.
1) Raise one currency Cash-Pak package to three feet. Release package and allow the package to drop freely onto one flat face and onto one side and one edge (3 separate package drops of the same package until all conditions are met).
2) Raise the same package as in step 1. Release package and allow the package to drop without obstruction onto two corners, one on each end of the package. (2 separate package drops of the same package until all conditions are met)
3) Raise the same package three feet above a pallet. Release package onto a corner edge of the pallet. (1 drop)
4) Raise package to eight feet and allow the package to drop on the pallet. (1 drop)
Results.
The packages shall not sustain a tear of more than one (1) inch in length or two or more tears of one-half inch or more when subjected to the above tests. The seals of the packages shall remain intact. A success rate equal to or greater than seventy-five (75) percent is acceptable. A success rate of less than seventy-five (75) percent is unacceptable. A success rate of ninety (90) percent or greater of the packages tested is desired.
File details come from the government source that posted it. Updated .