Attachment - Bldg. 1074 Materials Equipment In-Place List.xlsx
XLSX spreadsheet 18 KB Posted
- Attached to
- Bldg. 1074 HVAC Modification Federal contract opportunity
- Solicitation number
- N00253-22-R-0033
About this file
This document contains an in-place equipment list and description of work for a federal contract to replace HVAC equipment at Building 1074. The Naval Sea Systems Command is soliciting proposals to remove an existing roof top air handling unit and install five new ductless split system units at Building 1074 of the NAVSEA NUWC Division in Keyport. The contractor will be responsible for removing the old HVAC equipment, supplying and installing the new ductless split systems, as well as any necessary electrical, plumbing, and core drilling work. An equipment list is provided to track assets removed and installed along with costs. The replacement of the roof top unit and addition of ductless systems will allow for modification of the building's HVAC system.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment -Bldg 1074 Fire and STC rating drawings and design floor loads.pdf | ||
| Attachment - Bldg. 1074 HVAC Locations REV001 9-30-22.pdf | ||
| AMENDMENT -N00253-22-R-0033-0002.pdf | ||
| AMENDMENT -N00253-22-R-0033-0001.pdf | ||
| WA20220012 - Mod 5 - 8-5-2022.pdf | ||
| Attachment - Bldg. 1074 Photos.pdf | ||
| OPSEC Guide for Defense Contractors_2016.pdf | ||
| Attachment - Bldg 1074 Exterior Wall Detail.pdf | ||
| Attachment - Bldg. 1074 HVAC Locations.pdf | ||
| Solictiation - N00253-22-R-0033 - bldg. 1074 HVAC Modification.pdf | ||
| OSHA-RK-Forms-Package.pdf | ||
| NAVSEA Guide to Environmental Compliance Requirements.pdf | ||
| bid form.pdf | ||
| Attachment - Bldg 1074 Duct Work.pdf | ||
| Attachment 8 - Past Performance References.docx | DOCX document | |
| Safety_Data_Sheet.docx | DOCX document | |
| Safety Requirements for Contractors and Subcontractors (30 AUG 2021).pdf | ||
| PPI_Form.docx | DOCX document |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Installed Equipment
| Contract No: | |||||||||||||||
| Project Title: | |||||||||||||||
| Asset Number | Description | Long Description | Building No. | Room No. | Asset Qty | UOM | Replacement Cost | Supplier/Vendor | Manufacture | Model No. | Serial No. | Manufacture Warranty Expiration Date | Installation Date | Equipment Removed | |
| New Asset Number | |||||||||||||||
| (Note 4) | Description of Equipment or materials Installed | ||||||||||||||
| (Note 3) | Additional Relevant Information (e.g. size, capacity, limits, etc…) | Building # | Room Number of installed equipment | Quantity | |||||||||||
| (Note 1) | Standard Unit of Measure for asset installed | Cost (material and labor to remove (if applicable) and install asset | |||||||||||||
| (Note 2) | Name/Address/Email/ | ||||||||||||||
| Phone Number | Manufacturer | Model number of installed equipment | Serial number of installed equipment | MM/DD/YYYY | |||||||||||
| (Where no Manufacture Warranty use Contract Warranty Date) | MM/DD/YYYY | ||||||||||||||
| Asset Number of removed asset |
(if no label present on asset this column is Not Applicable) (Note 3)
| Notes: |
| 1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset. |
| 2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset. |
| 3. Enter equipment installed in column B and equipment removed in column O. |
| 4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government. |
Example
| Contract No: | NXXXXX-21-C-XXXX | ||||||||||||||
| Project Title: | Replace Breathing Air Filters and Install Carpet | ||||||||||||||
| Asset Number | Description | Long Description | Building No. | Room No. | Asset Qty | UOM | Replacement Cost | Supplier/Vendor | Manufacture | Model No. | Serial No. | Manufacture Warranty Expiration Date | Installation Date | Equipment Removed | |
| New Asset Number | |||||||||||||||
| (Note 4) | Description of Equipment or materials Installed | ||||||||||||||
| (Note 3) | Additional Relevant Information (e.g. size, capacity, limits, etc…) | Building # | Room Number of installed equipment | Quantity | |||||||||||
| (Note 1) | Standard Unit of Measure for asset installed | Cost (material and labor to remove (if applicable) and install asset | |||||||||||||
| (Note 2) | Name/Address/Email/ | ||||||||||||||
| Phone Number | Manufacturer | Model number of installed equipment | Serial number of installed equipment | MM/DD/YYYY | |||||||||||
| (Where no Manufacture Warranty use Contract Warranty Date) | MM/DD/YYYY | ||||||||||||||
| Asset Number of removed asset |
(if no label present on asset this column is Not Applicable) (Note 3)
| Breathing Air Filter | located behind cabinet next to AHU-1 op switch | 5094 | 101 | 1 | EA | $2,400.00 | Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/ | ||
| 360-123-4567 | Atlas Copco | FTX345BU | STB0004356 | 3/12/21 | 3/12/17 | 5094-0-101-154A-40-1H | |||
| Breathing Air Filter | located behind cabinet next to AHU-1 op switch | 5094 | 101 | 1 | EA | $2,400.00 | Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/ | ||
| 360-123-4567 | Atlas Copco | FTX345BU | STB0004357 | 3/12/21 | 3/12/17 | 5094-0-101-154A-40-1J | |||
| CARPET | 5094 | 116, 117, 118 | 300 | SQFT | $4,200.00 | Carpets - 156 Lumber Way, |
Bert WA 98317 carpets@msn.com
| 360-266-0154 | Mohawk | MOHAWH - STRBU | N/A | 3/21/19 | 3/12/17 | N/A |
| Notes: | ||||||
| 1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset. | ||||||
| 2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset. | ||||||
| 3. Enter equipment installed in column B and equipment removed in column O. | ||||||
| 4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government. |
File details come from the government source that posted it. Updated .