Attachment (B) Certified Test Reports for Solicitation.pdf
PDF 25 KB Posted
- Attached to
- Pure Water Tank
- Solicitation number
- N4215826QE056
About this file
This is a Required Certifications Report/Submittals attachment for Norfolk Naval Shipyard (NNSY) contract NNSY 4335/9, establishing mandatory certification and submittal requirements for material testing, inspections, and examinations.
The document outlines two primary vendor obligations: submission of certifications for all checked tests, inspections, and examinations with each material shipment, and submission of vendor test procedures or deviation letters for Norfolk Naval Shipyard approval prior to manufacturing. Vendors are liable for conducting all specified tests regardless of certification requirements. Certifications must include a completed Certificate of Compliance listing each test with quantitative or qualitative results from testing organizations; original laboratory reports or exact copies are required, not transcribed data. All certifications must identify the contract number, heat/batch/vendor traceability number, and vendor trademark. Chemical analysis certifications must tabulate complete test results, and mechanical properties certifications must include actual test data for tensile, yield, elongation, and reduction in area. For assemblies, certifications are required for all pressure boundary materials, including fasteners and penetrating stems. The document specifies 15 test, inspection, and examination categories applicable to this contract, including Certificate of Compliance, Mercury Free Clause verification, Drop Weight Test, Load Tests, Liquid Penetration Inspection, Weld Spatter/Slag Inspection, Hydrostatic Test, Calibrated Fill, Level Check, Operational Check, Dried Tank Internals, Weight Check, Cleanliness, and Passivation, each with corresponding contract section references.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Document No. 6135ZN01 Attachment (B)
NNSY 4335/9
REQUIRED CERTIFICATIONS REPORT/SUBMITTALS
INSTRUCTIONS
A. Certifications for all tests, inspections and examinations checked on this form shall be supplied with each shipment of material. Certifications shall be outlined in this attachment. (See column (1)).
B. Vendor submittals shall be supplied when required per this contract as checked on this form. (See column (2)).
1. The vendor must submit to Norfolk Naval Shipyard Test Procedures for Approval prior to manufacture as required by the specification/contract, or
2. The vendor must submit to Norfolk Naval Shipyard Test Procedures for Approval prior to manufacture if vendor's procedure do not meet current specification/contract requirements, or
3. The vendor must submit to Norfolk Naval Shipyard a letter of prior approval for deviation if test procedures differ from the specification/contract.
The submittals are to be approved by Norfolk Naval Shipyard prior to the item's production.
C. The vendor is liable for conducting all tests, inspections, and examinations specified by the contract and specifications whether certifications are required or not.
D. The following requirements shall be met:
1. The Certificate of Compliance shall be completed and returned with these tests.
2. The certification shall specifically list each test, inspection and examination checked on this attachment and separately certify the results of each test, inspection and examination. Each certification shall contain either original or exact copies of quantitative or qualitative test reports, as applicable, issued by the testing organization; data transcribed to another organization's forms are not acceptable. If the vendor performs the laboratory testing, the certification will note the "Original Laboratory Reports are on file at our facility." Certifications must be complete and objective.
3. The certification shall be made identifiable by containing the contract number, and the heat, batch or vendor traceability number marked on the material. The vendor's trademark shall be applied to the material. Traceability is defined as the positive method of identifying material to its objective quality evidence. Objective quality evidence is the quantitative data of all mechanical and chemical tests performed to prove that the material supplied complies with its procuring specification. When a vendor traceability number consists of more than one heat or batch, the vendor shall furnish certifications for all heats or batches identified by traceability number.
4. The chemical analysis certification shall include a tabulation of the complete chemical test analysis:
A. If the specification requires more than one chemical analysis be performed, the certification shall include the results of all the analyses.
5. The mechanical properties certification shall include the actual test data for tensile, yield, elongation and reduction in area.
A. Mill certifications for mechanical properties will be accepted as verification of as furnished material only if the contractor has not performed any process on the material such as heat treating, forging, cold working, etc., which could change the mechanical properties of the material.
B. When material is procured in a manner which makes heat identification impractical, such as continuous cast or pour, the vendor shall report the material composition and mechanical properties for the time period of manufacture.
6. For components (i.e., assemblies) the certification shall be supplied for all material utilized to fabricate the pressure boundary parts of the assembly, including the fasteners used to hold the pressure boundary parts together and stems which penetrate the pressure boundary.
Document No. 6135ZN01 Attachment (B)
NNSY 4335/9
APPLICABLE DOCUMENT Attachment (A) of Contract
TEST INSPECTIONS, ANALYSIS &
EXAMINATIONS
CERTS
PARA # (1)
SUBMITTAL
PARA # (2)
CERTIFICATE OF COMPLIANCE 12.1
MECURY FREE CLAUSE 3.5 & 12.2.1
DROP WEIGHT TEST 5.3 & 12.2.2
PRE / POST LOAD TEST 5.6.2 & 12.2.3
LIFT LUG / RIGGING ATTACHMENT LOAD TEST 5.6.3 & 12.2.4
LIQUID PENETRATION INSPECTION 9.4 & 12.2.5
WELD SPATTER / SLAG INSPECTION 9.9 & 12.2.6
HYDROSTATIC TEST 10.1 & 12.2.7
CALIBRATED FILL 10.2 & 12.2.8
LEVEL CHECK 10.3 & 12.2.9
OPERATIONAL CHECK 10.4 & 12.2.10
DRIED TANK INTERNALS 10.5 & 12.2.11
WEIGHT CHECK 10.6 & 12.2.12
CLEANLINESS 12.2.13 & 12.2.14
PASSIVATION 6.8 & 12.2.15
(1) SEE INSTRUCTION A, SHEET 1 OF THIS ATTACHMENT
(2) SEE INSTRUCTION B, SHEET 1 OF THIS ATTACHMENT
File details come from the government source that posted it. Updated .