ATTACHMENT A2 Exterior Signage Standards.pdf

DALLAS VAMC WAYFINDING & SIGNAGE

VA North Texas Health Care System

Exterior Signage Design Standards and Construction Documents

29 October, 2018

A t t a c h m e n t A 2

VHANTXWILLIK

Highlight

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

AP01

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 1 of 2 - General

Symbols & Arrows Fonts

[va logo]

[surveillance][va ntx logo]

Symbol Codes

Each symbol is assigned a code inside of brackets [ ], for example [parking] represents the parking symbol.

These codes are included in the sign message schedule where the corresponding symbol is to be included on a sign.

Selected sign vendor will be provided electronic artwork of symbols upon request.

[up]

[down]

[left]

[right]

[up left]

Banner Flag Art

[up right]

[down left]

[down right]

Helvetica Regular - 2010 ADA/ABA compliant tactile and visual text components

Helvetica Bold - Emphasis text font (ADA/ABA visual compliant only)

Helvetica Bold Condensed - Overhead Sign Font (ADA/ABA visual compliant only)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890

Typeface Copyright Information

Typefaces are licensed by their creators and as such cannot be provided to project participants or the fabricator by Wayfinding Associates. Typefaces are commercially available for purchase and download from online font resellers like Fonts.com, MyFonts.com and others.

[parking] [isa] [motorcycle]

Honoring All Who Served

Banner art and profile vector for Sign Type XB1 to be provided to fabricator

Honoring All Who Served

[bus] [medical]

Client:

Project:

Architect / Engineer:

AP02

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - General

Mounts and Locations

Mount hardware for each sign is specified in the message schedule“HARDWARE” column

S Round Surface -iameter of mounting surface.

For mounting to round/curved surface.

Vertical brackets on each side of sign attach to curved surface.

Specify d

T Strap Bracket - For mounting to existing poles.

Sign panel mechanically fastened to steel bracket, bracket is secured to existing pole with adjustable metal straps.

X Post(s) in Ground - Post(s) in ground mount. Posts and concrete to extend to local frost-line. Fabricator to detail mounting in shop drawings.

A Pressure Sensitive Tape - For smooth, hard surfaces.

Not recommended for some vinyl wall coverings.

Supplement with clear silicone on wall-covering or irregular surfaces. Sign not to exceed 100 square inches.

B Magnetic - For steel surfaces. Sign not to exceed

100 square inches.

C Hook and Loop - For fabric surfaces. Sign not to exceed 100 square inches.

D Screw - For rough surfaces such as brick or drywall.

Recommended for wall-mounted signs exceeding 100 square inches.

E Pin - For fabric surfaces, including fabric on hard material and acoustic panels. Sign not to exceed 100 square inches.

F Hook - For workstation panels. Clear bracket hooks over panel top; sign is suspended 2” down. Specify panel manufacturer, model and thickness.

G Freestanding Perpendicular - For freestanding applications such as desks. Extruded aluminum bracket. Standard

2-sided sign sits perpendicular to work surface; maximum recommended sign height is 4”.

GL Freestanding Angle - For freestanding applications such as desks. One-sided sign is mounted to “ ” bracket at a 60 angle.

L

H Panel Top - For top surface of furniture panel. Bracket is extruded aluminum affixed to panel top with pressure-sensitive tape. 8” maximum sign height.

i1.0 Suspended Ceiling - For attaching to 1” ceiling grid.

Connects with 2” extruded aluminum brackets. Sign should not exceed 1,440 square inches and 150 lbs.

i0.5 Suspended Ceiling - For attaching to 1/2” ceiling grid.

Connects with 2” extruded aluminum brackets. Sign should not exceed 1,440 square inches and 150 lbs.

J Cable Attachment - Braided stainless steel cable for high or irregular ceilings. Attach cables to/around rafters, beams, duct work, piping, etc. Sign should not exceed 1,440 square inches and 150 lbs. Installer to determine and provide appropriate cable and fasteners.

K Perpendicular “Blade” - For mounting 2-sided overhead

“blade” signs to wall. Sign is mounted perpendicular to wall.

Not available for signs wider than 15”.

L Glass - For backside of glass windows, doors or walls.

Clear acrylic bracket affixes to glass with clear pressure-sensitive tape.

M Ceiling Bracket - For general-purpose ceiling mount applications. Extruded aluminum bracket affixes to ceiling with screws. Sign should not exceed 1,440 square inches and 150 lbs. Installer to determine and provide appropriate fasteners and anchors.

N Rigid Posts to Ceiling - For general-purpose ceiling mount applications. Black 0.5” diameter aluminum rod suspends sign

6”, 12”, 18”, 24” from ceiling. Sign should not exceed 1,440 square inches and 150 lbs. Installer to determine and provide appropriate fasteners and anchors.

1”

½”

O Flexible Under-the-Top-Cap - For workstation wall panels.

Flexible black fabric device is held in place by panel top cap.

Sign locates flush with panel top.

P Panel/Tile - For workstation panels and tiles.

Aluminum hook device hooks over the top of panel or tile and is concealed by panel top cap. Locates top of sign flush with top of panel. Specify panel manufacturer, model and thickness.

R Saddle - For clear or frosted panels. Aluminum device hooks over panel top. Locates top of sign flush with panel top. Can be 1 or 2-sided. Maximum sign size is 4” high by 11” wide. Specify panel thickness.

October, Project

VA101F-17-C-3084

30%

Deliverable

- Exterior

Signage

Construction

Documents

- Appendix

Client:

Project:

Architect / Engineer:

XB1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sign Type

QTY. 2: 3/16” aluminum sign panel with welded studs on second surface and full-bleed digital graphics with UV over-laminate

Flag graphic: Full-color

Blue text background: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Back: Mill finish aluminum

1 1/2”h Helvetica Lt Condensed 57, centered

High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Non-illuminated aluminum sign panel

Sign Summary

Descrip:

Color(s):

Components

A

Line 1a/b

Notes

R 5/8”, typ

1 FACE A

XB1.2 1” = 1’

3 FACE B

XB1.2 1” = 1’

2 SIDE, TYP.

XB1.2 1” = 1’

Existing light pole Existing light pole Existing light pole to g ra d e

- Facility to provide high resolution digital artwork of flag graphic

- Wayfinding Associates to provide fabricator panel profile artwork upon request

- On sign/graphic panels, no holes or exposed fasteners permitted

- At least 3 band fasteners to be used for installation

- Exact fastener penetration locations to be determined in field at time of installation

- Installer to determine exact appropriate anchors for each installation location

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

/8

24 “

Honoring All Who Served

A A

Line 1a Honoring All Who ServedLine 1b

A A

SECTION A:

Typical Mount Detail for Single & Double Panel

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

See page 2 of 2 for additional specifications

Aluminum slide body cabinet with aluminum fascia panels

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

Logotype 6”h, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900190-O

Logotype 6”h, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900190-O

Text: 3 3/4”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Text: 3 3/4”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/2”h x 16”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O, typ.

Descrip:

Color(s):

Descrip:

Color(s):

D

F

Line 1a

Line 1b

Line 2-4b

Line 2-4a

Rule

Aluminum reveal

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Aluminum base reveal

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Descrip:

Color(s):

Descrip:

Color(s):

C

E

Aluminum slide body cabinet with aluminum fascia panels

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Blue accents: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Aluminum accent cap

Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Non-illuminated aluminum cabinet sign with internal post

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

3 TOP

Xi1 1/2” = 1’

2 SIDE 1

Xi1 1/2” = 1’

5 SIDE 2

Xi1 1/2” = 1’

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi1 1/2” = 1’

4 FACE B - BACK

Xi1 1/2” = 1’

GradeGrade

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

A

B

C

DD

C

D

E E

A

“ 1

/8

/8

/4 m in a b o ve g ra d e

R 153”

R 150”

60 “

23.54°

48" c h a m fe r, t yp

15"

12"

/4

5” margin, typ.

A F

60"

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

VA CommunityVA Community

Building 75Building 75

CenterCenter

Line 1aLine 1b

Line 2aLine 2b

Line 3aLine 3b RuleRule

Line 4aLine 4b

B

5 “

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

F F

D 12 "

2.25"

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi2.1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

QTY. 2 SignComp Series 3 aluminum post and cap, typ.

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

3 1/4” deep aluminum slide body cabinet and aluminum graphics panel

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Blue accents: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Extruded reveal: Paint to match adjacent panel color(s)

5”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Text: 2 1/2”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Accessible symbol: 3”h symbol, left justified

Background field: Match Matthews Paint ‘Capri Blue’ MP10212

Symbol: High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Other symbols: 3”h, left justified. See symbols sheet for other symbol colors.

Text: 2 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Accessible symbol: 3”h symbol, right justified

Background field: Match Matthews Paint ‘Capri Blue’ MP10212

Symbol: High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Other symbols: 3”h, right justified. See symbols sheet for other symbol colors.

5”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/4”h x 17 1/2”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Non-illuminated aluminum post and panel sign

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

C

Line 1a

Line 2-6a

Line 2-6b

Line 1b

Rule

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

See page 2 of 2 for additional specifications

Xi2.1 1/2” = 1’

2 SIDE 1

Xi2.1 1/2” = 1’

5 SIDE 2

Xi2.1 1/2” = 1’

A BC

54 3/4"

0 1/2” reveal between sign panels and posts, typ.

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi2.1 1/2” = 1’

4 FACE B - BACK

Xi2.1 1/2” = 1’

Rule

C

Human Resource

BB

A

Grade

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi2.1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

Extruded aluminum reveal, typ.

R 80” m in a b o ve g ra d e m in b e lo w g ra d e

3 1/4”

D 3 1/4”, typ.

TT49Line 1a

Line 2a

Line 3a

Line 4a

Line 5a

Line 6a

3 “

36 " c h a m fe r, t yp

Grade

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

Human Resource

TT49

Mgmnt. PIV Cards, Fingerprints, Background

Investigations

3 “

/4

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Mgmnt. PIV Cards, Fingerprints, Background

Investigations

/4

/1

/8

/8

/8

A

Rule

Line 1b

Line 2b

Line 3b

Line 4b

Line 5b

Line 6b

C

0.50”

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi2.2

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

QTY. 2 SignComp Series 3 aluminum post and cap, typ.

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

3 1/4” deep aluminum Slide body cabinet and aluminum graphics panel

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Blue accents: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Extruded reveal: Paint to match adjacent panel color(s)

4”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

8 1/2”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

2 1/2”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

4”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

8 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

2 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/4”h x 17 1/2”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Non-illuminated aluminum post and panel sign

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

C

Line 1a

Line 2a

Line 3,4a

Line 1b

Line 2b

Line 3,4b

Rule

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

Xi2 1/2” = 1’

A BC

54 3/4"

0 1/2” reveal between sign panels and posts, typ.

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi2.2

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

Extruded aluminum reveal, typ.

D 3 1/4”, typ.

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Line 1b

Rule

Veterans Recovery Center

Bldg.

6Line 2b

Line 3b

Line 4b

5 SIDE 2

Xi2 1/2” = 1’

4 FACE B - BACK

Xi2 1/2” = 1’

B

A

Grade

R 80” c h a m fe r, t yp

3 “

2 SIDE 1

Xi2 1/2” = 1’

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi2 1/2” = 1’

Line 1a

Rule

C

Veterans Recovery Center

B

A m in a b o ve g ra d e m in b e lo w g ra d e

3 1/4”

Bldg

6Line 2a

Line 3a

Line 4a

3 “

36 "

/4

/8

"2

/4

/4

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

C

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi2.3

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

QTY. 2 SignComp Series 3 aluminum post and cap, typ.

Posts:

When line 2a/b reads “FREEDOM” - 725 Orange

When line 2a/b reads “LIBERTY” - 775 Green

When line 2a/b reads “PATRIOT” - 735 Red

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

3 1/4” deep aluminum slide body cabinet and aluminum graphics panel

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Accents:

When line 2a/b reads “FREEDOM” - 725 Orange

When line 2a/b reads “LIBERTY” - 775 Green

When line 2a/b reads “PATRIOT” - 735 Red

Extruded reveals: Paint to match adjacent panel color(s)

13 1/2”h symbol, left justified

Outline and ‘P’ - Avery Dennison ‘Black’ SC 900-190-O

Background - Avery Dennison ‘White’ SC-900 101-O

2 1/2”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

13 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

2 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/4”h x 17 1/2”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Non-illuminated aluminum post and panel sign

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

C

Line 1a

Line 2,3a

Line 1b

Line 2,3b

Rule

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

See page 2 of 2 for additional specifications

FREEDOM

Parking Zone

PATRIOT

Parking Zone

LIBERTY

Parking Zone

Colors assigned to VA-Defined Parking Zones

Xi2.3 1/2” = 1’

A C

54 3/4"

0 1/2” reveal between sign panels and posts, typ.

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi2.3

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

Extruded aluminum reveal, typ.

D 3 1/4”, typ.

FREEDOM

Parking Zone

FREEDOM

Parking Zone

Messages, colors and graphics shown for example only.

Refer to Sign Message Schedule for exact messages, colors and graphics.

Rule Line 1b

Line 2b

Line 3b

5 SIDE 2

Xi2.3 1/2” = 1’

4 FACE B - BACK

Xi2.3 1/2” = 1’

B

A

Grade

R 80” c h a m fe r, t yp

3 “

2 SIDE 1

Xi2.3 1/2” = 1’

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi2.3 1/2” = 1’

Rule

C

B

A m in a b o ve g ra d e m in b e lo w g ra d e

3 1/4”

Line 1a

Line 2a

Line 3a

3 “

36 "

/4

/8

/1

/4

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

C

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi2.4

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

QTY. 2 SignComp Series 3 aluminum post and cap, typ.

Posts:

When line 2a/b reads “Freedom” - Exact color TBD by VA

When line 2a/b reads “Liberty” - Exact color TBD by VA

When line 2a/b reads “Patriot” - Exact color TBD by VA

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

3 1/4” deep aluminum slide body cabinet with aluminum graphics panel

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Blue accents: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Extruded reveal: Paint to match adjacent panel color(s)

13 1/2”h symbol, left justified

Outline and ‘P’ - Avery Dennison ‘Black’ SC 900-190-O

Background - Avery Dennison ‘White’ SC-900 101-O

2 1/2”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

13 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

2 1/2”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/4”h x 17 1/2”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Non-illuminated aluminum post and panel sign

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

C

Line 1a

Line 2,3a

Line 1b

Line 2,3b

Rule

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

Xi2.4 1/2” = 1’

A C

54 3/4"

0 1/2” reveal between sign panels and posts, typ.

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi2.4

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

Extruded aluminum reveal, typ.

D 3 1/4”, typ.

Valet & Volunteer Parking Only

Valet & Volunteer Parking Only

Messages, colors and graphics shown for example only.

Refer to Sign Message Schedule for exact messages, colors and graphics.

Rule Line 1b

Line 2b

Line 3b

5 SIDE 2

Xi2.4 1/2” = 1’

4 FACE B - BACK

Xi2.4 1/2” = 1’

B

A

Grade

R 80” c h a m fe r, t yp

3 “

2 SIDE 1

Xi2.4 1/2” = 1’

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi2.4 1/2” = 1’

Rule

C

B

A m in a b o ve g ra d e m in b e lo w g ra d e

3 1/4”

Line 1a

Line 2a

Line 3a

36 "

/4

/8

/1

/4

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

C

D 12 "

B

Valet & Volunteer 3.00", typ.

0.50"

Xi3 1/2” = 1’

2 SIDE 1

Xi3 1/2” = 1’

4 SIDE 2

Xi3 1/2” = 1’

See page 1 of 2 for additional specifications

1 FRONT

Xi3 1/2” = 1’

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi3

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sign Type

Liberty GarageLine 2

Line 1

R 130”

60"

/2

/4

/8

6” deep aluminum cabinet with tensioned bleed frame (SignComp or equal)

Silver areas on returns: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Accents on returns:

When line 2 reads “Freedom Garage” - 725 Orange

When line 2 reads “Liberty Garage” - 775 Green

When line 2 reads “Patriot Garage” - 735 Red

Tensioned translucent white ‘flex-face’ scrim (3M Panaflex 945 or equal)

White areas: Exposed scrim material

Accents:

When line 2 reads “Freedom Garage” - 725 Orange (translucent)

When line 2 reads “Liberty Garage” - 775 Green (translucent)

When line 2 reads “Patriot Garage” - 735 Red (translucent)

Extruded reveals: Paint to match adjacent panel color(s)

30”h symbol, centered

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

4 3/4”h Helvetica Medium, centered

White (exposed scrim material)

Internally illuminated (White LED) aluminum tensioned frame flex-face sign

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Components

A

B

Line 1

Line 2

Notes

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion

- All welds to be performed by a certified welder

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

- All structural and electrical details to be compliant to applicable codes and ordinances

- All electrical components to be UL approved

- Include secure manual power disconnect

- Facility to draw one 270v, 20A dedicated power circuit to sign location, terminate in J-box

Sign lamps to accept 270V electrical service

- Graphics to be uniformly illuminated

- Sign lamps to be controlled at building with optical sensor

Existing mounting surface (varies)

Existing mounting surface (varies)

Existing mounting surface (varies)

6 “

Messages and graphics and colors shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Liberty Garage

Patriot GarageFreedom Garage

Colors assigned to VA-Defined Parking Zones

Scale: NTS

A

B

Client:

Project:

Architect / Engineer:

Xi4.1

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sign Type

QTY 1: 3/16” aluminum sign panel with welded studs on second surface

Upper background: Match Avery Dennison ‘White’ SC 900-101-O

Lower background: Match Accent Color to specified Sign Message Schedule text as follows:

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Back: Mill finish aluminum

Full perimeter wrap on existing pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Full perimeter wrap on existing pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

3 3/4”h Helvetica Medium, centered

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

8”h Helvetica Medium Condensed, right justified

High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Non-illuminated aluminum sign panel

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

B

A

C

Line 1

Line 4

Notes

- On sign/graphic panels, no holes or exposed fasteners permitted

- At least 3 band fasteners to be used for installation

- Exact fastener penetration locations to be determined in field at time of installation

- Installer to determine exact appropriate anchors for each installation location

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Existing light pole

X

FREEDOM

Parking

Zone

R 5/8”, typ

Line 1

Line 2

Line 3

Line 4

Existing light pole to g ra d e

A A

2 SIDE

Xi4.1 1” = 1’

A

C

1 FRONT

Xi4.1 1” = 1’

2.00"

2.00"

.5

.2

.4

.6

.0

.0

.0

.0

3 TOP

Xi4.1 SCALE: NTS

SECTION A:

Typical Mount Detail for Single & Double Panel

.0

24.00”

Client:

Project:

Architect / Engineer:

Xi4.2

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sign Type

QTY 2: 3/16” aluminum sign panel with welded studs on second surface

Upper background: Match Avery Dennison ‘White’ SC 900-101-O

Lower background: Match Accent Color to specified Sign Message Schedule text as follows:

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Back: Mill finish aluminum

Full perimeter wrap on existing pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Full perimeter wrap on existing pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

3 3/4”h Helvetica Medium, centered

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

8”h Helvetica Medium Condensed, right justified

High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Non-illuminated aluminum sign panel

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

B

A

C

Line 1

Line 4

Notes

- On sign/graphic panels, no holes or exposed fasteners permitted

- At least 3 band fasteners to be used for installation

- Exact fastener penetration locations to be determined in field at time of installation

- Installer to determine exact appropriate anchors for each installation location

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Existing light pole

X

FREEDOM

Parking

Zone

R 5/8”, typ

Line 1a/b

Line 2a/b

Line 3a/b

Line 4a/b

Existing light pole to g ra d e

A A

2 SIDE

Xi4.2 1” = 1’

A

C

1 FRONT (BACK IDENTICAL)

Xi4.2 1” = 1’

2.00"

2.00"

.5

.2

.4

.6

.0

.0

.0

.0

.0

24.00”

B

3 TOP

Xi4.2 SCALE: NTS

SECTION A:

Typical Mount Detail for Single & Double Panel

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi4.2p

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

QTY 2: 3/16” aluminum sign panel with welded studs on second surface

Upper background: Match Avery Dennison ‘White’ SC 900-101-O

Lower background: Match Accent Color to specified Sign Message Schedule text as follows:

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Back: Mill finish aluminum

Full perimeter painted band on pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

Full perimeter painted band on pole, high performance cast vinyl

- When line 1a/b reads “FREEDOM” - 725 Orange

- When line 1a/b reads “LIBERTY” - 775 Green

- When line 1a/b reads “PATRIOT” - 735 Red

6” square structural aluminum pole with cap

Match Duranodic Bronze of existing light poles, semi-gloss

3 3/4”h Helvetica Medium, centered

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

8”h Helvetica Medium Condensed, right justified

High performance cast vinyl, Avery Dennison ‘White’ SC 900-101-O

Non-illuminated aluminum sign panel

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Descrip:

Color(s):

Components

B

A

C

D

Line 1

Line 4

Notes

- On sign/graphic panels, no holes or exposed fasteners permitted

- Exact fastener penetration locations to be determined in field at time of installation

- Installer to determine exact appropriate anchors for each installation location

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

X

FREEDOM

Parking

Zone

R 5/8”, typ

Line 1a/b

Line 2a/b

Line 3a/b

Line 4a/b

Existing light pole to g ra d e

A A

2 SIDE

Xi4.2 1” = 1’

A

C

D

1 FACE A - (FACE B IDENTICAL)

Xi4.2 1” = 1’

2.00"

2.00"

.5

.2

.4

.6

.0

.0

.0

.0

.0

24.00”

B

3 TOP

Xi4.2 SCALE: NTS

SECTION A:

Typical Mount Detail for Single & Double Panel

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

Descrip:

Color(s):

E

When line 2 reads “Freedom Garage” - 725 Orange

When line 2 reads “Liberty Garage” - 775 Green

When line 2 reads “Patriot Garage” - 735 Red

Client:

Project:

Architect / Engineer:

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

5 SIDE, TYP

Xi4.2p 1/2” = 1’

See page 1 of 2 for additional specifications

4 FACE A - (FACE B IDENTICAL)

Xi4.2p 1/2” = 1’ m in a b o ve g ra d e m in b e lo w g ra d e

E

E

E

D

D 12 "

Xi4.2p

X

FREEDOM

Parking

Zone

.0

.0

Grade

.0

6 TOP

Xi4.2p 1/2” = 1’

D 20”

D 12”

A

B

C

D

6.00"

.0

Client:

Project:

Architect / Engineer:

Sheet 1 of 2 - Sign Type

Xi7

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Notes

- On sign panels no holes or exposed fasteners permitted

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All welds should be treated to prevent corrosion.

- Sign elements shall be painted in accordance with the color specifications in this document

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing

- The painted surfaces have a consistent semi-gloss finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal

- Sign to be installed level and plumb

See page 2 of 2 for additional specifications

Aluminum slide body cabinet with aluminum fascia panels

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Cast concrete footing, with rebar and metal mesh reinforcement, fine brushed finish

N/A

Logotype 6”h, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900190-O

Logotype 6”h, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900190-O

Text: 3 3/4”h Helvetica Medium, right justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

Text: 3 3/4”h Helvetica Medium, left justified

High performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O

1/2”h x 16”w high performance cast vinyl, Avery Dennison ‘Black’ SC 900-190-O, typ.

Descrip:

Color(s):

Descrip:

Color(s):

D

F

Line 1a

Line 1b

Line 2-4b

Line 2-4a

Rule

Aluminum reveal

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Aluminum base reveal

Matthews Paint ‘Black is Back’ MP59647, semi-gloss

Descrip:

Color(s):

Descrip:

Color(s):

C

E

Aluminum slide body cabinet with aluminum fascia panels

Silver areas: Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Blue accents: Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Aluminum accent cap

Matthews Paint ‘Silver Cup Metallic’ MP18076, semi-gloss

Non-illuminated aluminum cabinet sign with internal post

Sign Summary

Descrip:

Color(s):

Descrip:

Color(s):

Components

Xi1 1/2” = 1’

2 SIDE 1

Xi1 1/2” = 1’

5 SIDE 2

Xi1 1/2” = 1’

See page 1 of 2 for additional specifications

1 FACE A - FRONT

Xi1 1/2” = 1’

4 FACE B - BACK

Xi1 1/2” = 1’

Wayfinding Consultant:

Signage General Contractor:

Client:

Project:

Architect / Engineer:

Xi7

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

A

B

C

DD

C

D

E

A m in a b o ve g ra d e

R 153”

R 150”

60 “

23.54°

48" c h a m fe r, t yp

15 "

12 "

/4

5” margin, typ.

A F

60"

"6

/8

/8

/4

Messages and graphics shown for example only.

Refer to Sign Message Schedule for exact messages and graphics.

Spinal CordSpinal Cord

Building 74Building 74

Injury CenterInjury Center

Line 1aLine 1b

Line 2aLine 2b

Line 3aLine 3b RuleRule

Line 4aLine 4b

B

5 “

Grade Grade E

Min. 10”M in

D5” PVC Sleeve backfilled with hydraulic concrete, typ

F

D 12 "

F

2.25"

Client:

Project:

Architect / Engineer:

Xi10

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 1 of 3 - Sign Type

6” deep internally illuminated (LED) aluminum channel logo symbol with trim caps and translucent face lenses.

Exterior of aluminum channel bodies and trim caps:

Lenses - Clear acrylic - DO NOT use white lens material

Lenses first surface - 3M Dual Color Film 3635-222 painted to match

Lenses second surface - 3M Diffuser Film 3635-30 or equal

LED illumination - White

Interior walls of channel elements - MAP Reflective White 281 500SP

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Internally illuminated channel logo

Sign Summary

Descrip:

Color(s):

Components

A

Notes

- Any exposed fasteners to be painted to match adjacent surface

- Use no exposed raceway(s)

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All structural and electrical details to be compliant to applicable codes and ordinances

- All electrical components to be UL approved

- Include secure manual power disconnect

- Facility to draw one 270v, 20A dedicated power circuits to sign location, terminate in J-box

- Sign lamps to accept 270V electrical service

- Logotype to be uniformly illuminated

- Sign lamps to be controlled by photo-sensor

- All welds should be treated to prevent corrosion

- All welds to be performed by a certified welder

- Sign elements shall be painted in accordance with the color specifications in this document.

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing.

- The painted surfaces have a consistent eggshell finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal.

- Sign to be installed level and plum

- Required permit(s) and fee(s) are the responsibility of fabricator

Client:

Project:

Architect / Engineer:

Xi10

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 3 - Sign Type

1 PARTIAL SOUTH ELEVATION - SIGN LOCATION

Xi10 1/16” = 1’

2 SOUTH ELEVATION - SIGN LOCATION

Xi10 NTS

E Q

E Q

EQ EQ

6”

0.1875” acrylic faces

LED modules

14ga low voltage wire

1” mylar trim cap

6” deep fabricated aluminum logo letters (0.125” backs, 0.063 returns)

Existing building facade

0.50” conduit

60W power supplies in galvanized boxes

A SECTION

Xi10 NTS

Through bolt, typ (see engineering drawings)

A

Client:

Project:

Architect / Engineer:

Xi10

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 3 of 3 - Sign Type

3 PARTIAL NORTH ELEVATION - SIGN LOCATION

Xi10 1/16” = 1’

4 NORTH ELEVATION - SIGN LOCATION

Xi10 NTS

A

EQEQ

E Q

E Q

Client:

Project:

Architect / Engineer:

Xi11

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 1 of 2 - Sign Type

6” deep internally illuminated (LED) aluminum channel letters on structural raceway(s), Helvetica Medium with trim caps and translucent face lenses.

Exterior of aluminum channel bodies and trim caps:

Lenses - Clear acrylic - DO NOT use white lens material

Lenses first surface - 3M Dual Color Film 3635-222 painted to match

Lenses second surface - 3M Diffuser Film 3635-30 or equal

LED illumination - White

Interior walls of channel elements - MAP Reflective White 281 500SP

Raceway(s) - Paint to match color of mounting surface

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Internally illuminated channel logo

Sign Summary

Descrip:

Color(s):

Components

A

Notes

- Any exposed fasteners to be painted to match adjacent surface

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All structural and electrical details to be compliant to applicable codes and ordinances

- All electrical components to be UL approved

- Include secure manual power disconnect

- Facility to draw one 270v, 20A dedicated power circuits to sign location, terminate in J-box

- Sign lamps to accept 270V electrical service

- Logotype to be uniformly illuminated

- Sign lamps to be controlled by photo-sensor

- All welds should be treated to prevent corrosion

- All welds to be performed by a certified welder

- Sign elements shall be painted in accordance with the color specifications in this document.

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing.

- The painted surfaces have a consistent eggshell finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal.

Client:

Project:

Architect / Engineer:

Xi11

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

1 PARTIAL WEST ELEVATION MAIN ENTRY CANOPY - SIGN LOCATION

Xi11 1/8” = 1’

MAIN ENTRANCE

E Q

E Q

EQ EQ

A SECTION

Xi11 NTS

2 WEST ELEVATION - SIGN LOCATION

Xi11 NTS

A

A

MAIN ENTRANCE

A

1” Mylar Trim Cap

0.1875” Acrylic Lens

Aluminum Raceway cover

Riser

Aluminum Raceway

Appropriate fasteners/anchors

6” deep fabricated aluminum channel letters

(0.125” backs, 0.062 returns)

Transformer

LED Modules

Client:

Project:

Architect / Engineer:

Xi12

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 1 of 2 - Sign Type

6” deep internally illuminated (LED) aluminum channel letters on structural raceway(s), Helvetica Medium with trim caps and translucent face lenses.

Exterior of aluminum channel bodies and trim caps:

Lenses - Clear acrylic - DO NOT use white lens material

Lenses first surface - 3M Dual Color Film 3635-222 painted to match

Lenses second surface - 3M Diffuser Film 3635-30 or equal

LED illumination - White

Interior walls of channel elements - MAP Reflective White 281 500SP

Raceway(s) - Paint to match color of mounting surface

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Matthews Paint ‘Capri Blue’ MP10212, semi-gloss

Internally illuminated channel logo

Sign Summary

Descrip:

Color(s):

Components

A

Notes

- Any exposed fasteners to be painted to match adjacent surface

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All structural and electrical details to be compliant to applicable codes and ordinances

- All electrical components to be UL approved

- Include secure manual power disconnect

- Facility to draw one 270v, 20A dedicated power circuits to sign location, terminate in J-box

- Sign lamps to accept 270V electrical service

- Logotype to be uniformly illuminated

- Sign lamps to be controlled by photo-sensor

- All welds should be treated to prevent corrosion

- All welds to be performed by a certified welder

- Sign elements shall be painted in accordance with the color specifications in this document.

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with sufficient time allowed between applications for proper curing.

- The painted surfaces have a consistent eggshell finish

(unless otherwise noted) and shall be free of dirt, grit, mottling and “orange-peel” effect

- Polyurethane coatings shall be MAP, as manufactured by

Matthews Paint Company or approved equal.

Client:

Project:

Architect / Engineer:

Xi12

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 2 of 2 - Sign Type

A SECTION

Xi12 NTS

2 EAST ELEVATION - SIGN LOCATION

Xi12 NTS

1 PARTIAL EAST ELEVATION MAIN ENTRY CANOPY - SIGN LOCATION

Xi12 1/8” = 1’

SOUTH ENTRANCE

E Q

E Q

EQ EQ

A

A

SOUTH ENTRANCE

A

1” Mylar Trim Cap

0.1875” Acrylic Lens

Aluminum Raceway cover

Riser

Aluminum Raceway

Appropriate fasteners/anchors

6” deep fabricated aluminum channel letters

(0.125” backs, 0.062 returns)

Client:

Project:

Architect / Engineer:

Xi13

Dallas VAMC

Wayfinding

& Signage

Wayfinding Associates

Design with a sense of Direction

TM

Sheet 1 of 2 - Sign Type

6” deep internally illuminated (LED) aluminum channel logo symbol with trim caps and translucent face lenses.

Exterior of aluminum channel bodies and trim caps: Pantone 200 C (red), Lenses - Translucent white lens material with translucent cast vinly applied first surface, Avery Dennison ‘Pantone 200 C’ UC 900-427-T

LED lamps - White

Interior walls of channel elements - MAP Reflective White 281 500SP

Paint to match semi-gloss

Internally illuminated channel logo

Sign Summary

Descrip:

Color(s):

Components

A

Notes

- Client to verify access to wall behind facade for installation of transformers and anchors

- Any exposed fasteners to be painted to match adjacent surface

- Use no exposed raceway(s)

- Any exposed fasteners to be painted to match adjacent surface

- All sign materials and fasteners to be rust-proof and/or oxidization-proof

- Aluminum construction shall be of welded aluminum of sufficient gauge to prevent “oil-canning”, warping and any surface unevenness. All seams shall be welded and ground smooth. Any visible joints, seams, weld or grind marks will be unacceptable

- All structural and electrical details to be compliant to applicable codes and ordinances

- All electrical components to be UL approved

- Include secure manual power disconnect

- Facility to draw one 270v, 20A dedicated power circuits to sign location, terminate in J-box

- Sign lamps to accept 270V electrical service

- Logotype to be uniformly illuminated

- Sign lamps to be controlled by photo-sensor

- All welds should be treated to prevent corrosion

- All welds to be performed by a certified welder

- Sign elements shall be painted in accordance with the color specifications in this document.

Each paint shall contain ultra-violet inhibitors and shall be evenly spray applied with…