Attachment A~2.pdf

The document is a detailed specification from the MASSDOT Highway Department for litter bags, specifically outlining the technical requirements for plastic bags in two sizes: 24" X 34" X 3" with handles and ties, and 30 and 55-gallon bags without handles and ties. Both bag types are specified to be made of 0.0035 Mil thickness polyethylene sheet material in a bright yellow color. The detailed Figure "A" provides precise technical specifications, including a hand grip design, seam welding requirements, and a pleated bottom with no bottom seam.

The specification provides explicit manufacturing details, such as a 3 1/4 inches by 7.8 inches hand grip, a 1 5/8 inches by 24 inches strip seam welded at both ends to be used as a shoulder strip and tie, and a requirement that the seam weld be the same strength as the base material. The technical drawing specifies that the material must be a 0.0035 mil thick sheet polyethylene in bright yellow, with a 1 1/2" folded pleated bottom. The accompanying images visually demonstrate the bag's front and back, showing the bright yellow color and structural characteristics detailed in the technical specification.