Attachment A- SOW Retrofit.docx

Bureau of Alcohol, Tobacco, Firearms and Explosives

Functional and Technical Support for ATF’s Bureau Owned Vehicles

1.0 Background

The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) is a principal law enforcement agency within the United States Department of Justice dedicated to preventing terrorism, reducing violent crime, and protecting our Nation. The men and women of ATF perform the dual responsibilities of enforcing Federal criminal laws and regulating the firearms and explosives industries. We are committed to working directly, and through partnerships, to investigate and reduce crime involving firearms and explosives, acts of arson, and illegal trafficking of alcohol and tobacco products. The ATF Headquarters is located at 99 New York Ave, NE Washington, DC 20226.

ATF currently owns a fleet of motor vehicles. This vehicle pool includes passenger sedans, Sport Utility Vehicles (SUVs), vans, pickup trucks, and motorcycles.

ATF-owned vehicles are purchased through GSA’s Automotive Commodity Center. The vehicles are equipped with heavy-duty chassis, batteries, suspension, brakes, tires, special gauges, and other accessories. Because these vehicles can be generally recognized as police cars, even when unmarked, ATF purchases other vehicle models that blend in with the general vehicle population. All government-owned non-special purpose vehicles, regardless of manufacturer configuration, are fitted, by ATF upon delivery, with sirens, lights, and communications equipment. ATF policy also dictates the use of double trunk locking mechanisms to protect law enforcement sensitive items that may be stored in GOVs.

ATF is a federal law enforcement agency consisting of a Headquarters component, 25 field divisions, a National Academy and numerous field locations. All these entities are staffed with personnel who supervise, conduct, participate in, and train new agents or assist in the conduct of criminal investigations or industry inspections. They also respond to and coordinate law enforcement operations that involve a high degree of risk, extreme sensitivity, or other unusual significance. Personnel in these functions must routinely travel at all hours directly from their homes to crime scenes, arrest and search scenes, undercover off-sites, surveillance activities, and other related activities.

2.0 Objectives

To provide installation and equipment support to ATF owned vehicles.

3.0 Tasks

3.1 Be responsible for accepting delivery of a minimum of 50 but no more than 600 vehicles per year, installing vehicle packages, and disposing of the equipment, and delivery of a completed vehicle package to a designated location. The contractor shall properly dispose of replaced equipment in accordance with local, state and federal EPA regulations

a) Vehicle Package 1 for Passenger-All Sedans installation will consist of a Mobile Radio Kit, A Siren System, Visor Light (2), Rear deck lights (2), Wig Wags (2), a secure Full Trunk Vault (1) Trunk Locks, Trunk Access Block, and a Universal Trunk Tray.

b) Vehicle Package 2 for Compact Sport Utility Vehicles installation will consist of installing a Mobile Radio Kit, A Siren System, Visor Light (2), Rear deck lights (2), Grille Lights (2), Full Vault (1) 1 Drawer, and Trunk Locks, Trunk Access Block, and a Universal Trunk Tray.

c) Vehicle Package 3 for Mid-size SUV or Full-size Pickup Trucks will consist of installing a Mobile Radio Kit, A Siren System, Visor Light (2), Rear deck lights (2), Grille Lights (2), a secure Full Vault (1) 2 Drawer, head cap and Trunk Locks, Trunk Access Block, and a Universal Trunk Tray.

d) Vehicle Package 4 for Full-size SUV or Full-size Pickup Trucks SRT Operator Emergency Equipment.

e) Vehicle Package 5 for Mid-Size SUV or Full-size Pickup Trucks SRT K9 Handler Emergency Equipment.

f) Vehicle Package 6 for Full-size Pickup Trucks ATF Bomb Technician Truck Requirements (EEB/CES/NCETR).

g) Vehicle Package 7 for Mid-Size SUV or Full-size Pickup Trucks SACH K-9.

h) Vehicle Package 8 for Full-size Pickup Trucks ATF CFI Responder.

i) Vehicle Package 9 for Mid-Size SUV or Full-size Pickup Trucks CFI.

j) Vehicle Package 10/ Compact-size or Full Size 4 x 2 Cargo Van (SRT Jump-Out Van).

k) Vehicle Package 11/ Compact-size or Full-size 4 x 2 or 4 x 4, Any Seating Passenger Van.

l) Vehicle Package 12/Alternate Full-Size Pickup - Emergency Equipment with Cap (6 ft. 9-inch cargo bed)

m) Vehicle Package 13/Full-size Pickup 4 Door with 6-foot bed (FCSB - Radio Communications Vehicle)

n) Vehicle Package 14/ Full-Size Pickup Trucks ATF SACH Responder

o) Vehicle Package 15/Full Size 4 x 2 Cargo Van (SRT Jump-Out Van). GVWR 8000. (w/Custom Buildout of Jump Out Seating).

p) Vehicle Package 16/Full Size 4 x 2 Cargo Van (SRT Jump-Out Van). GVWR 9201. (w/Custom Buildout of Jump Out Seating; extended height and length option – approximately 170”)

3.2 Specification Requirements. The contractor shall provide ATF with the equipment below IAW the specifications provided below. Each respondent’s proposal must contain technical data, pricing for the base and four (4) one year option period. Respondents will be evaluated on the retrofitting equipment and services outlined in their proposal. Each proposal shall meet a minimum of the following specifications.

a) Vehicle Package 1/Sedan Emergency Equipment. Universal for all major U.S. Motor Vehicle Companies:

1) Remote Microphone-Controlled Siren/Amplifier/Light Function Assembly

1. Microphone controlled siren amplifier and light functions.

1. OFF - Turns off all enabled tone and light functions

1. PA - Allows speech/RRB through vehicle’s speaker/overrides all other functions

1. TONE - Switches tone between Wail and Priority when #3 is enabled

1. MAN - Manual Peak-and-Hold/functions when all other tones are off

1. POS #1 - Activates 10 Amp relay

1. POS #2 - Keeps #1 enabled and activates 2nd 10-Amp relay (progressive)

1. POS #3 - Keeps #1 and #2 enabled and activates 3rd 10-Amp relay (progressive)

1. AUX 1 - Scrolls through (2) 10 Amp relays

1. AUX 2 - Activates 3rd AUX 10 Amp relay

1. Progressive 3-position “slide switch like” push button control.

1. Backlit/Rubberized microphone control head.

1. Microprocessor based amplifier with “plug-and-play” connections.

1. Eight 10-Amp light and Aux relay positions.

1. 100 W output - Wail, Priority, Air Horn, Manual Peak and Hold tones.

1. Versatile microphone and amplifier mounting brackets.

1. Remote on/off switch box with built-in PA volume control.

1. Horn ring transfer and Radio Re-broadcast Repeat (RRB).

1. Installs bracket/harness kit

1. Detailed Specifications

· Input Voltage 11 VDC to 15 VDC

· Polarity Negative Ground Only

· Operating Temperature Range -30° to +65° C

· Standby Current < 0.22 amperes

· Operating Current 8 amperes (nominal)

· (no lamps on) (13.6 V battery, 11-ohm load)

· Frequency Range 725 1550 Hz

· Voltage Output 62-66 V peak-to-peak

· Siren Shipping Weight 6.5 lbs. (3 kg)

· Amplifier Dimensions 8.5"L x 5.5"W x 2"H (without base)

· Control Head Weight 0.5 lbs. (0.25kg)

· Control Head Dimensions 4.5"L x 2"W x 1"H

2) Siren Speaker Assembly

1. Speaker design for versatility into vehicle grille mounting

1. 100-watt speaker designed to withstand the toughest conditions

1. Housing made of black corrosion resistant aluminum fully encapsulated

1. Input voltage of 32VRMS

1. Sound Output: SAE J1849 CCR Title 13 Compliance

1. Independence: 11 ohms

1. Physical Dimensions: 5.5Hx5.9Wx2.7D

1. Weight: Not to exceed 5.5 pounds

3) Internal LED Warning Lights

1. 1 Each Dual Head Light Assembly Red/Blue

1. 1 Each Single Head Light Assembly Red

1. 1 Each Single Head Light Assembly Blue

1. Housing made compact and lightweight polycarbonate

1. Quick and versatile swivel type bail bracket and suction cups

1. Snap-on flash guard and reflective tape included

1. Five-foot hard installation/synchronized installation wire harnesses

1. Installation Hardware Included

1. Detailed Specifications

· Volts 12.8 VDC

· Current Draw 1.5A 2.2A

· Operating Temp -30˚C to +65˚C

· Physical Dimensions: 4.3 in Wx1.2 in Hx 2.9 in D

· Weight 1.0 lb.

· Single Units Flash Pattern

· 79 FPM Power Quad

· 150 FPM Single

· 151 FPM Single

· 74 FPM Single

· 75 FPM Single

· 240 FPM Single

· 241 FPM Single

· 240 FPM Double

· 241 FPM Double

· 150 FPM Double

· 151 FPM Double

· 74 FPM Double

· 75 FPM Double

· 150 FPM Triple

· 75 FPM Triple

· 5 Single @ 680 FPM

· 4 Single @ 216 FPM

· 4 Single @ 570 FPM

· 3 Single @ 246 FPM

· 3 Single @ 460 FPM

· 2 Quad @ 75 FPM

· Progressive

· 4 Single @154 FPM

· 2 Quad @ 75 FPM

· Random/Steady Burn

· Dual Unit Flash Pattern

· Alternating 150 FPM Single

· Alternating 240 FPM Single

· Alternating 75 FPM Single

· Alternating 150 FPM Triple

· Alternating 75 FPM Triple

· Precise Flip-Flop 63 FPM

· Overlap 71 FPM Quad

· Alt. Overlap 50 FPM Power Quad

· Alt. Overlap 40 FPM Power Quad

· Alt. Overlap 100 FPM Double

· Alternating Progressive

· Alt. 2 Quad. @ 70 FPM

· 4 Single @150 FPM

· Alt. 5 Single @ 320 FPM

· 1 Power Quint @ 90 FPM

· Alt. 2 Quad @ 83 FPM

· 4 Single @ 272 FPM

· Overlap 3 Single @180 FPM

· 4 Single @ 706 FPM

· 3 Single @ 390 FPM

· 6 Single @ 660 FPM

· Overlap Power Quad 75 FPM

· Random

· Steady/166 FPM Single

· Steady/103 FPM Burst

· Steady/4 Single @ 700 FPM

· 2 Single @ 230 FPM

· 166 FPM Single/Steady

· 103 FPM Burst/Steady

· 4 Single @ 700 FPM/Steady

· 2 Single @ 720 FPM/Steady

· Steady Burn

4) Corner Pre-Configured Flasher System

1. Four-channel flasher power supply with AMP connectors.

1. Seven selectable flash patterns and dual light head cut-off.

1. Industry pinning standard.

1. Potted cavity to resists moisture and vibration.

1. 4 each Clear Corner Flasher Heads

1. 2 each 10ft. cable assembly with AMP connectors

1. 2 each 22ft. cable assembly with AMP connectors

1. Input Voltage: Normal Operation 12.8 or 25.6 VDC

1. Input Current @ 12.8VDC Operation 4.1A

1. Input Power 53 W

1. Output Power 46 W

1. Output Energy 11 Joules

1. Power per Flasher Head 11.5W

1. LED Head (2) Outputs N/A N/A 4 amps/hd 4 amps/hd

1. Flasher Outlets 4

1. Fuse 7.5 amp Auto Fuse

5) Truck Vault Sedan Vault W/ Security Lock.

b) Vehicle Package 2/Compact SUV Emergency Equipment. Universal for all major U.S. Motor Vehicle Companies

1) Remote Microphone-Controlled Siren/Amplifier/Light Function Assembly

1. Microphone controlled siren amplifier and light functions.

1. OFF Turns off all enabled tone and light functions

1. PA Allows speech/RRB through vehicle’s speaker/overrides all other functions

1. TONE Switches tone between Wail and Priority when #3 is enabled

1. MAN Manual Peak-and-Hold/functions when all other tones are off

1. POS #1 Activates 10 Amp relay

1. POS #2 Keeps #1 enabled and activates 2nd 10-Amp relay (progressive)

1. POS #3 Keeps #1 and #2 enabled and activates 3rd 10-Amp relay (progressive)

1. AUX 1 Scrolls through (2) 10 Amp relays

1. AUX 2 Activates 3rd AUX 10 Amp relay

1. Progressive 3-position “slide switch like” push button control.

1. Backlit/Rubberized microphone control head.

1. Microprocessor based amplifier with “plug-and-play” connections.

1. Eight 10-Amp light and Aux relay positions.

1. 100 W output - Wail, Priority, Air Horn, Manual Peak and Hold tones.

1. Versatile microphone and amplifier mounting brackets.

1. Remote on/off switch box with built-in PA volume control.

1. Horn ring transfer and Radio Re-broadcast Repeat (RRB).

1. Installs bracket/harness kit

1. Detailed Specifications

· Input Voltage 11 VDC to 15 VDC

· Polarity Negative Ground Only

· Operating Temperature Range -30° to +65° C

· Standby Current < 0.22 amperes

· Operating Current 8 amperes (nominal)

· (no lamps on) (13.6 V battery, 11 ohm load)

· Frequency Range 725 1550 Hz

· Voltage Output 62-66 V peak-to-peak

· Siren Shipping Weight 6.5 lbs. (3 kg)

· Amplifier Dimensions 8.5"L x 5.5"W x 2"H (without base)

· Control Head Weight 0.5 lbs. (0.25kg)

· Control Head Dimensions 4.5"L x 2"W x 1"H

2) Siren Speaker Assembly

1. Speaker design for versatility into vehicle grille mounting

1. 100-watt speaker designed to withstand the toughest conditions

1. Housing made of black corrosion resistant aluminum fully encapsulated

1. Input voltage of 32VRMS

1. Sound Output: SAE J1849 CCR Title 13 Compliance

1. Independence: 11 ohms

1. Physical Dimensions: 5.5Hx5.9Wx2.7D

1. Weight: Not to exceed 5.5 pounds

3) Internal LED Warning Lights

1. 1 Each Dual Head Light Assembly Red/Blue

1. 1 Each Single Head Light Assembly Red

1. 1 Each Single Head Light Assembly Blue

1. Housing made compact and lightweight polycarbonate

1. Quick and versatile swivel type bail bracket and suction cups

1. Snap-on flash guard and reflective tape included

1. Five-foot hard installation/synchronized installation wire harnesses

1. Installation Hardware Included

1. Detailed Specifications

· Volts 12.8 VDC

· Current Draw 1.5A 2.2A

· Operating Temp -30˚C to +65˚C

· Physical Dimensions: 4.3 in Wx1.2 in Hx 2.9 in D

· Weight 1.0 lb.

· Single Units Flash Pattern

· 79 FPM Power Quad

· 150 FPM Single

· 151 FPM Single

· 74 FPM Single

· 75 FPM Single

· 240 FPM Single

· 241 FPM Single

· 240 FPM Double

· 241 FPM Double

· 150 FPM Double

· 151 FPM Double

· 74 FPM Double

· 75 FPM Double

· 150 FPM Triple

· 75 FPM Triple

· 5 Single @ 680 FPM

· 4 Single @ 216 FPM

· 4 Single @ 570 FPM

· 3 Single @ 246 FPM

· 3 Single @ 460 FPM

· 2 Quad @ 75 FPM

· Progressive

· 4 Single @154 FPM

· 2 Quad @ 75 FPM

· Random/Steady Burn

· Dual Unit Flash Pattern

· Alternating 150 FPM Single

· Alternating 240 FPM Single

· Alternating 75 FPM Single

· Alternating 150 FPM Triple

· Alternating 75 FPM Triple

· Precise Flip-Flop 63 FPM

· Overlap 71 FPM Quad

· Alt. Overlap 50 FPM Power Quad

· Alt. Overlap 40 FPM Power Quad

· Alt. Overlap 100 FPM Double

· Alternating Progressive

· Alt. 2 Quad. @ 70 FPM

· 4 Single @150 FPM

· Alt. 5 Single @ 320 FPM

· 1 Power Quint @ 90 FPM

· Alt. 2 Quad @ 83 FPM

· 4 Single @ 272 FPM

· Overlap 3 Single @180 FPM

· 4 Single @ 706 FPM

· 3 Single @ 390 FPM

· 6 Single @ 660 FPM

· Overlap Power Quad 75 FPM

· Random

· Steady/166 FPM Single

· Steady/103 FPM Burst

· Steady/4 Single @ 700 FPM

· 2 Single @ 230 FPM

· 166 FPM Single/Steady

· 103 FPM Burst/Steady

· 4 Single @ 700 FPM/Steady

· 2 Single @ 720 FPM/Steady

· Steady Burn

4) Corner Pre-Configured Flasher System

1. Four-channel flasher power supply with AMP connectors.

1. Seven selectable flash patterns and dual light head cut-off.

1. Industry pinning standard.

1. Potted cavity to resists moisture and vibration.

1. 4 each Clear Corner Flasher Heads

1. 2 each 16ft. cable assembly with AMP connectors

1. 2 each 30ft. cable assembly with AMP connectors

1. Input Voltage: Normal Operation 12.8 or 25.6 VDC

1. Input Current @ 12.8VDC Operation 4.1A

1. Input Power 53 W

1. Output Power 46 W

1. Output Energy 11 Joules

1. Power per Flasher Head 11.5W

1. LED Head (2) Outputs N/A N/A 4 amps/hd 4 amps/hd

1. Flasher Outlets 4

1. Fuse 7.5-amp Auto Fuse

5) Fully Enclosed Firearm/Security Vault

6) Soundoff headlight flasher

7) Soundoff taillight flasher

c) Vehicle Package 3/ Mid-size SUV or Full-size Pickup Trucks Emergency Equipment. Universal for all major U.S. Motor Vehicle Companies

1) Remote Microphone-Controlled Siren/Amplifier/Light Function Assembly

1. Microphone controlled siren amplifier and light functions.

1. OFF Turns off all enabled tone and light functions

1. PA Allows speech/RRB through vehicle’s speaker/overrides all other functions

1. TONE Switches tone between Wail and Priority when #3 is enabled

1. MAN Manual Peak-and-Hold/functions when all other tones are off

1. POS #1 Activates 10 Amp relay

1. POS #2 Keeps #1 enabled and activates 2nd 10-Amp relay (progressive)

1. POS #3 Keeps #1 and #2 enabled and activates 3rd 10-Amp relay (progressive)

1. AUX 1 Scrolls through (2) 10 Amp relays

1. AUX 2 Activates 3rd AUX 10 Amp relay

1. Progressive 3-position “slide switch like” push button control.

1. Backlit/Rubberized microphone control head.

1. Microprocessor based amplifier with “plug-and-play” connections.

1. Eight 10-Amp light and Aux relay positions.

1. 100 W output - Wail, Priority, Air Horn, Manual Peak and Hold tones.

1. Versatile microphone and amplifier mounting brackets.

1. Remote on/off switch box with built-in PA volume control.

1. Horn ring transfer and Radio Re-broadcast Repeat (RRB).

1. Installs bracket/harness kit

1. Detailed Specifications

· Input Voltage 11 VDC to 15 VDC

· Polarity Negative Ground Only

· Operating Temperature Range -30° to +65° C

· Standby Current < 0.22 amperes

· Operating Current 8 amperes (nominal)

· (no lamps on) (13.6 V battery, 11-ohm load)

· Frequency Range 725 1550 Hz

· Voltage Output 62-66 V peak-to-peak

· Siren Shipping Weight 6.5 lbs. (3 kg)

· Amplifier Dimensions 8.5"L x 5.5"W x 2"H (without base)

· Control Head Weight 0.5 lbs. (0.25kg)

· Control Head Dimensions 4.5"L x 2"W x 1"H

2) Siren Speaker Assembly

1. Speaker design for versatility into vehicle grille mounting

1. 100-watt speaker designed to withstand the toughest conditions

1. Housing made of black corrosion resistant aluminum fully encapsulated

1. Input voltage of 32VRMS

1. Sound Output: SAE J1849 CCR Title 13 Compliance

1. Independence: 11 ohms

1. Physical Dimensions: 5.5Hx5.9Wx2.7D

1. Weight: Not to exceed 5.5 pounds

3) Internal LED Warning Lights

1. 1 Each Dual Head Light Assembly Red/Blue

1. 1 Each Single Head Light Assembly Red

1. 1 Each Single Head Light Assembly Blue

1. Housing made compact and lightweight polycarbonate

1. Quick and versatile swivel type bail bracket and suction cups

1. Snap-on flash guard and reflective tape included

1. Five-foot hard installation/synchronized installation wire harnesses

1. Installation Hardware Included

1. Detailed Specifications

· Volts 12.8 VDC

· Current Draw 1.5A 2.2A

· Operating Temp -30˚C to +65˚C

· Physical Dimensions: 4.3 in Wx1.2 in Hx 2.9 in D

· Weight 1.0 lb.

· Single Units Flash Pattern

· 79 FPM Power Quad

· 150 FPM Single

· 151 FPM Single

· 74 FPM Single

· 75 FPM Single

· 240 FPM Single

· 241 FPM Single

· 240 FPM Double

· 241 FPM Double

· 150 FPM Double

· 151 FPM Double

· 74 FPM Double

· 75 FPM Double

· 150 FPM Triple

· 75 FPM Triple

· 5 Single @ 680 FPM

· 4 Single @ 216 FPM

· 4 Single @ 570 FPM

· 3 Single @ 246 FPM

· 3 Single @ 460 FPM

· 2 Quad @ 75 FPM

· Progressive

· 4 Single @154 FPM

· 2 Quad @ 75 FPM

· Random/Steady Burn

· Dual Unit Flash Pattern

· Alternating 150 FPM Single

· Alternating 240 FPM Single

· Alternating 75 FPM Single

· Alternating 150 FPM Triple

· Alternating 75 FPM Triple

· Precise Flip-Flop 63 FPM

· Overlap 71 FPM Quad

· Alt. Overlap 50 FPM Power Quad

· Alt. Overlap 40 FPM Power Quad

· Alt. Overlap 100 FPM Double

· Alternating Progressive

· Alt. 2 Quad. @ 70 FPM

· 4 Single @150 FPM

· Alt. 5 Single @ 320 FPM

· 1 Power Quint @ 90 FPM

· Alt. 2 Quad @ 83 FPM

· 4 Single @ 272 FPM

· Overlap 3 Single @180 FPM

· 4 Single @ 706 FPM

· 3 Single @ 390 FPM

· 6 Single @ 660 FPM

· Overlap Power Quad 75 FPM

· Random

· Steady/166 FPM Single

· Steady/103 FPM Burst

· Steady/4 Single @ 700 FPM

· 2 Single @ 230 FPM

· 166 FPM Single/Steady

· 103 FPM Burst/Steady

· 4 Single @ 700 FPM/Steady

· 2 Single @ 720 FPM/Steady

· Steady Burn

4) Corner Pre-Configured Flasher System

1. Four-channel flasher power supply with AMP connectors.

1. Seven selectable flash patterns and dual light head cut-off.

1. Industry pinning standard.

1. Potted cavity to resists moisture and vibration.

1. 4 each Clear Corner Flasher Heads

1. 2 each 16ft. cable assembly with AMP connectors

1. 2 each 30ft. cable assembly with AMP connectors

1. Input Voltage: Normal Operation 12.8 or 25.6 VDC

1. Input Current @ 12.8VDC Operation 4.1A

1. Input Power 53 W

1. Output Power 46 W

1. Output Energy 11 Joules

1. Power per Flasher Head 11.5W

1. LED Head (2) Outputs N/A N/A 4 amps/hd 4 amps/hd

1. Flasher Outlets 4

1. Fuse 7.5-amp Auto Fuse

5) Fully Enclosed Firearm/Security Vault

6) Soundoff headlight flasher

7) Soundoff taillight flasher

d) Vehicle Package 4/ Full-size SUV or Full-size Pickup Trucks SRT Operator Emergency Equipment

SRT OPERATOR VEHICLES

· Whelen Inner Edge, Ford Expedition (or equivalent) Visor Area;

· Whelen Cencom Sapphire Siren System (CCSRN3);

· Whelen 100 Watt Speaker Behind Grill;

· Whelen Universal L Speaker Bracket;

· Whelen Dominator Plus 6 LED Light - Red/Blue - 6 LED's/Module -RRRBBB Behind Grill;

· Whelen Vertex Hide-away LED, Red/Blue Split 4 Corners; Troy Console for Ford Expedition (or equivalent) Includes cup holder, arm rest, mic clips and two power outlets;

· Whelen Mirror Beams, Expedition (or equivalent), Red/Blue Split Side View Mirrors;

· Surface mount ION lighting - RED Running Boards;

· Surface mount ION lighting - BLUE Running Boards;

· Whelen Dual Avenger LED Red/Blue Rear Side Windows-Side Facing;

· TADP8RB Whelen Dominator Plus LED Traffic Advisor Rear Glass-Rear Facing;

· SafeStop Module;

· Auxiliary Battery System – with switch on dash to connect both systems to start the vehicle in the event the primary battery is dead. Aux battery would also run all installed equipment so as to not burden primary battery;

· Defender Supply Wiring Harness, Power Distribution Block and Battery Management System;

· Truck Vault with glider, single drawer, one-half width; single drawer full width; dual drawer full width of cargo area, 24” inside minimum drawer height for all three specs;

· Safety Screen separating 2nd row and 3rd row to prevent gear from launching forward during panic stops/accidents, etc.;

· ATF Provided Radio System.

· Console Light: Position in the middle console between the seats, light to be red, as to not illuminate the whole vehicle.

· Security System: One security system including two remote control units wired to the power door locks, light flasher, starter interrupt, glass breakage detection, intrusion protection and has a status indicator light on the dashboard. The remote control shall also activate a remote start circuit to start the vehicle while still locked with the alarm active.

· Window Laminate: This is an exterior laminate applied to all windows, except the front windshield, preventing the vehicle windows from shattering if the vehicle is broken into. The windows will fracture in place, instead of shattering, making it more difficult to gain entry thru the vehicle windows. Numerous SRT vehicles have been targeted and broken into over the years with sensitive gear and personal gear stolen from inside the vehicles. The laminate is in addition to window tinting which is applied to the inside of the windows.

· Pushbar: The pushbar attached to the front bumper to facilitate vehicle blocking tactics during Home Invasion operations or other high-risk operations involving our vehicles.

· Fire Extinguisher: Mounted inside the vehicles in the rear cargo area. The deployment of Noise Flash Diversionary Devices can and often does result in small fires necessitating the need for an immediate response.

e) Vehicle Package 5/Mid-Size SUV or Full-size Pickup Trucks SRT K9 Handler Emergency Equipment

SRT K9 HANDLER VEHICLES-The above equipment would be installed in the K9 vehicles with the electronics/kennel equipment listed below:

· 5% window tint to all windows including eyebrow only of front windshield;

· Ace K9 Dual Purpose K9 Door Popper & Monitoring System with Heat, Smoke, Carbon Monoxide Detectors, Electronic Window Fan Kit, remote pager system and Heavy-Duty Fan Guard;

· Idle Control – Fully automatic high idle unit to maintain RPMs of vehicle while AC is on;

· Ignition Over-ride – Switch mounted on dash allowing removal of car keys, leave vehicle and accessories running, with vehicle locked in park and K9 secured inside kennel. Disabled by placing foot on brake;

· Hood vents/louvers– Installed to have vehicle secure and running with AC on without opening hood to dissipate heat and leaving vehicle’s wiring components exposed to public, etc.;

· In-Kennel Light red light – allows handler to manually turn on kennel light from center console;

· American Aluminum EZ Rider Kennel with rubber floor mat/emergency escape door window guards and pass-thru door. This kennel allows for a lower floorboard and taller ceiling height. Requires removal of 2nd/3rd row seating.

· Console Light: Position in the middle console between the seats, light to be red, as to not illuminate the whole vehicle.

f) Vehicle Package 6/Full Size Pickup Trucks ATF Bomb Technician Truck (EEB/CES/NCETR).

The outfitting of the below equipment will bring the vehicles in-line for bomb technician operations to include transporting and securing the required response equipment, towing robot and cargo trailers, and accessing remote locations on a regular basis during deployments.

CHASSIS AND BASE VEHICLE:

· ¾ Ton truck, Ford F250 (or equivalent) single rear wheel (SRW), medium length wheel base (6’ bed)

· Extra power Gas V-8 Engine

· Crew (4 door) cab

· Automatic transmission

· 4-wheel drive, Shift on the fly transfer case

· Single rear wheel

· All Terrain Tires on aluminum wheels

· Power telescoping heated mirrors

· Heavy service front suspension package

· Towing package with class IV receiver hitch

· Skid plate package

· Adjustable pedals and remote start

· 6-way power driver’s seat

· AM-FM/CD Stereo with Bluetooth phone connectivity for hands free operation

· Factory installed GPS navigation system

· Factory Installed Rear Parking sensors and rear view camera with color display

· High output alternator

· HD locking rear differential (special traction differential), prefer ratio of 4.30 or 4.10

· Cab steps/running boards

· Power windows and door locks

· Remote start

· Keyless entry

· Cruise control

· Trailer brake controller

· 40/20/40 front seat with center seat/console

· Locking Tailgate

ENGINE AND ELECTRICAL

EMERGENCY VEHICLE ELECTRICAL SYSTEM: Leave the factory alternator(s) in place to retain the full factory warranty.

UNDER HOOD WIRING: On the firewall towards the passenger side shall be a fabricated aluminum mounting plate containing a 150-amp master circuit breaker with manual disconnect, a 300-amp solenoid operating when a National Luna Intelligent Solenoid is activated and a 40-amp constant power circuit breaker. The aluminum electrical panel shall be mounted in an area not to interfere with any engine operation, fluid checks, factory equipment or service. Each component shall include an engraved panel indicating the function and rating of each component. All vendor supplied aftermarket wiring shell be enclosed in high temperature black split loom with a permanent red stripe to differentiate the aftermarket wiring from the factory wiring. A detailed wiring diagram shall be included with each conversion and a sample must be included with the bid.

120 VOLT AC POWER

INVERTER AND WIRING: One 1200-watt pure sine wave inverter shall be mounted in the passenger compartment behind the rear seat and properly vented against overheating. The inverter shall be wired to the battery system with the appropriate size cable and include a fuse that is easily accessible. Included shall be a remote on-off switch installed in a location to be determined at the pre-construction conference. All interior outlets shall include a metal weatherproof box with screw in connectors and screw in covers for any non-used ports. The outlet must be a high quality 20-amp duplex outlet with a stainless-steel cover. Wiring must be stranded 12/3 boat cable to withstand the rigors of vehicle installed systems. The use of solid wire such as Romex shall be unacceptable and reason for rejection. All wiring shall be routed to be protected against chafing, all metal holes shall include a snap ring grommet and all wiring shall be covered in split loom. Outlets shall be in the cab in the rear passenger area and at the rear hatch.

EXTERIOR

REAR BED ENCLOSURE: ARE “Toolmaster CX -Series” with side storage compartments and rear solid panel lift up hatch. The cap shall be and painted to match the body in base coat/clear coat paint. The paint quality shall be equal to or better than the OEM finish of the pickup. The hatches shall include a power door lock and be integrated into the factory system, alarm and remotes. A 12V power outlet, with multiple outlets and outlet covers, shall be in the side storage compartments (location TBD).

INTERIOR LIGHTING: Four high power round LED lights with a chrome bezel and a dome lens. Two mounted on the ceiling of the cap and two on the rear hatch to illuminate the pull out when stored or deployed, these lights shall not interfere with taller items that could be stored on the slide out. A momentary cancel switch shall be recess mounted at the curb side rear opening. This switch shall cancel the lights then shall automatically reset and reactivate when the doors or hatch are closed and reopened. In addition, if the cancel switch is pushed a second time the lights will cancel or reset without closing and opening the rear hatch. The side tool compartments shall all contain LED lighting.

REAR BED STORAGE UNIT: This system shall be an aluminum made telescoping or slide out system with no less than 1,000-lb and no more than a 1,200-lb capacity rating when extended with no downward flex or sagging. The footprint of this system must be maximized depending on depth and width of the truck bed. Special consideration must be taken into account for headspace and cap side compartments. The day box included in this system shall be a dual compartment, made of aluminum, dual lid design authorized by ATF variance 10-00078. This unit shall be connected to the main floor structure to support the weight when fully extended.

This system shall accommodate a Decked Company drawer system SKU# DN3, Decked Company drawer system locks, and Decked Company Cargoglide-Drawer System Compatible SKU# CG1000-6348. This deck system being made of composite materials is lighter weight as required for the vehicle suspension and resistant to humidity, chemicals, and other contaminates as well as easily decontaminated.

CAB INTERIOR

12-VOLT ELECTRICAL: There is to be located in the cab a National Luna Dual Battery Controller (location TBD). The Dual Battery Controller shall control the Intelligent Solenoid located under the hood. There shall be an eight-position fused distribution panel with a ground distribution block located in the cab (location TBD), the distribution panel shall feed from the 300-amp relay under the hood. All electrical components shall feed from this distribution panel.

IGNITION OVERRIDE: Install an ignition override in the vehicle which will allow the vehicle to be started manually with the ignition key, and with activation of the override, remove the key and lock the vehicle while it remains running.

AUXILLARY POWER POINT: An Able model ABL-14.0553 triple 12V power outlet shall be located in the cab (location TBD). There should also be one 120V power outlet in the cab.

WIRING: Included with this conversion is a harness system throughout the vehicle including OEM factory style plugs and connectors. All wiring shall be GXL wire function coded every 4" and the harness system utilizing a minimum of 10 different colors and shall be protected with high temperature convoluted loom. There are no splices or connectors within any harness and anywhere it passes through a wall a snap ring grommet is included. OEM factory style plug in connectors is used where possible eliminating unnecessary cutting and splicing into factory wiring.

WEAPONS SECURITY: Supply and install vault that can accommodate a SafeBOX (a pistol size firearm lock box) and a long rifle. This vault must fit and run the entire width of the fold-down rear seat. Additionally, this vault shall be equipped with a locking clamp to serve as a tertiary locking system for the rifle.

EMERGENCY WARNING LIGHTING AND EQUIPMENT – All lighting shall be mounted in a covert fashion.

BEHIND WINDSHIELD LIGHTING: Two Whelen SFIONJ dual LED lights behind the windshield above the rear-view mirror on a vehicle specific, custom aluminum bracket finished in black powder coat finish. The bracket mounts into OEM mounting points and shall not interfere with the fabric of the headliner and be very solid.

GRILL LIGHTS: Two Whelen IONJ LED flashers with black flanges mounted behind the grille and wired to the console. Lighting must be mounted in a covert fashion and include clear lenses; colors shall be red and blue.

HEADLIGHT INSERTS: Two VTX609 C LED inserts, one mounted into each head light housing and sealed so no moisture can enter the head light assemblies. LED lights shall be wired to the control system in the front console. LED color shall be white.

TAIL LIGHT INSERTS: Four Whelen Vertex LED inserts, two mounted in each tail light housing, red in the tail light and white in the reverse light and sealed so no moisture can enter the head light assemblies. LED lights shall be wired to the control system in the front console. LED color shall be white and red.

REAR LIGHTING: Two Whelen IONJ dual LED lights wired to the siren and light controller. LED color shall be Blue and Red and mounted in a concealed location.

BEHIND REAR HATCH LIGHTING: Two dual white/red LED flood lights mounted behind the rear hatch shall operate when the rear hatch is opened. There shall be a momentary rocker switch mounted on the right-side trim wired to a cancel circuit and shall cancel these lights when depressed and shall automatically reset and reactivate when the doors or hatch are closed and reopened.

SIREN: Whelen HHS-2200 hand held siren and light controller installed by the center of the dash accessible by the driver only when needed.

SIREN SPEAKERS: One Whelen SA315P 100-watt speaker mounted in the front of the vehicle with vehicle specific bracket as not to interfere with engine or cooling components and project sound forward without obstruction.

ACCESSORIES

SECURITY SYSTEM: One security system including two remote control units wired to power door locks, compartment doors, light flasher, glass breakage sensor, starter interrupt and have a status indicator light on the dashboard. The remote control shall also activate a remote start circuit to start the vehicle while still locked with the alarm active. There shall be a means of disabling the ability to unlock the rear storage compartment of the vehicle, i.e. by means of a hidden switch, removing a fuse, etc. in order to prevent unauthorized access to that part of the vehicle by service personnel.

COMMUNICATION EQUIPMENT

All radio installations shall be completed by professional installers. All equipment shall be tested at the time of receipt and installed in a professional manor as per the manufacturer’s instructions. Each radio shall be tuned and programmed and fully functional at the time of delivery. The vendor shall be responsible to coordinate the equipment and installation to ensure a quality installation.

RADIOS: One department supplied Motorola radio installed in the console and wired to a department supplied Stico vehicle specific tri band antenna on a front fender.

g) Vehicle Package 7/Mid-Size SUV or Full-size Pickup Trucks SACH K-9. Universal for all major U.S. Motor Vehicle Companies

1) Remote Microphone-Controlled Siren/Amplifier/Light Function Assembly

1. Microphone controlled siren amplifier and light functions.

1. OFF Turns off all enabled tone and light functions

1. PA Allows speech/RRB through vehicle’s speaker/overrides all other functions

1. TONE Switches tone between Wail and Priority when #3 is enabled

1. MAN Manual Peak-and-Hold/functions when all other tones are off

1. POS #1 Activates 10 Amp relay

1. POS #2 Keeps #1 enabled and activates 2nd 10-Amp relay (progressive)

1. POS #3 Keeps #1 and #2 enabled and activates 3rd 10-Amp relay (progressive)

1. AUX 1 Scrolls through (2) 10 Amp relays

1. AUX 2 Activates 3rd AUX 10 Amp relay

1. Progressive 3-position “slide switch like” push button control.

1. Backlit/Rubberized microphone control head.

1. Microprocessor based amplifier with “plug-and-play” connections.

1. Eight 10-Amp light and Aux relay positions.

1. 100 W output - Wail, Priority, Air Horn, Manual Peak and Hold tones.

1. Versatile microphone and amplifier mounting brackets.

1. Remote on/off switch box with built-in PA volume control.

1. Horn ring transfer and Radio Re-broadcast Repeat (RRB).

1. Installs bracket/harness kit

1. Detailed Specifications

· Input Voltage 11 VDC to 15 VDC

· Polarity Negative Ground Only

· Operating Temperature Range -30° to +65° C

· Standby Current < 0.22 amperes

· Operating Current 8 amperes (nominal)

· (no lamps on) (13.6 V battery, 11-ohm load)

· Frequency Range 725 1550 Hz

· Voltage Output 62-66 V peak-to-peak

· Siren Shipping Weight 6.5 lbs. (3 kg)

· Amplifier Dimensions 8.5"L x 5.5"W x 2"H (without base)

· Control Head Weight 0.5 lbs. (0.25kg)

· Control Head Dimensions 4.5"L x 2"W x 1"H

2) Siren Speaker Assembly

1. Speaker design for versatility into vehicle grille mounting

1. 100-watt speaker designed to withstand the toughest conditions

1. Housing made of black corrosion resistant aluminum fully encapsulated

1. Input voltage of 32VRMS

1. Sound Output: SAE J1849 CCR Title 13 Compliance

1. Independence: 11 ohms

1. Physical Dimensions: 5.5Hx5.9Wx2.7D

1. Weight: Not to exceed 5.5 pounds

3) Internal LED Warning Lights

1. 1 Each Dual Head Light Assembly Red/Blue

1. 1 Each Single Head Light Assembly Red

1. 1 Each Single Head Light Assembly Blue

1. Housing made compact and lightweight polycarbonate

1. Quick and versatile swivel type bail bracket and suction cups

1. Snap-on flash guard and reflective tape included

1. Five-foot hard installation/synchronized installation wire harnesses

1. Installation Hardware Included

1. Detailed Specifications

· Volts 12.8 VDC

· Current Draw 1.5A 2.2A

· Operating Temp -30˚C to +65˚C

· Physical Dimensions: 4.3 in Wx1.2 in Hx 2.9 in D

· Weight 1.0 lb.

· Single Units Flash Pattern

· 79 FPM Power Quad

· 150 FPM Single

· 151 FPM Single

· 74 FPM Single

· 75 FPM Single

· 240 FPM Single

· 241 FPM Single

· 240 FPM Double

· 241 FPM Double

· 150 FPM Double

· 151 FPM Double

· 74 FPM Double

· 75 FPM Double

· 150 FPM Triple

· 75 FPM Triple

· 5 Single @ 680 FPM

· 4 Single @ 216 FPM

· 4 Single @ 570 FPM

· 3 Single @ 246 FPM

· 3 Single @ 460 FPM

· 2 Quad @ 75 FPM

· Progressive

· 4 Single @154 FPM

· 2 Quad @ 75 FPM

· Random/Steady Burn

· Dual Unit Flash Pattern

· Alternating 150 FPM Single

· Alternating 240 FPM Single

· Alternating 75 FPM Single

· Alternating 150 FPM Triple

· Alternating 75 FPM Triple

· Precise Flip-Flop 63 FPM

· Overlap 71 FPM Quad

· Alt. Overlap 50 FPM Power Quad

· Alt. Overlap 40 FPM Power Quad

· Alt. Overlap 100 FPM Double

· Alternating Progressive

· Alt. 2 Quad. @ 70 FPM

· 4 Single @150 FPM

· Alt. 5 Single @ 320 FPM

· 1 Power Quint @ 90 FPM

· Alt. 2 Quad @ 83 FPM

· 4 Single @ 272 FPM

· Overlap 3 Single @180 FPM

· 4 Single @ 706 FPM

· 3 Single @ 390 FPM

· 6 Single @ 660 FPM

· Overlap Power Quad 75 FPM

· Random

· Steady/166 FPM Single

· Steady/103 FPM Burst

· Steady/4 Single @ 700 FPM

· 2 Single @ 230 FPM

· 166 FPM Single/Steady

· 103 FPM Burst/Steady

· 4 Single @ 700 FPM/Steady

· 2 Single @ 720 FPM/Steady

· Steady Burn

4) Corner Pre-Configured Flasher System

1. Four-channel flasher power supply with AMP connectors.

1. Seven selectable flash patterns and dual light head cut-off.

1. Industry pinning standard.

1. Potted cavity to resists moisture and vibration.

1. 4 each Clear Corner Flasher Heads

1. 2 each 16ft. cable assembly with AMP connectors

1. 2 each 30ft. cable assembly with AMP connectors

1. Input Voltage: Normal Operation 12.8 or 25.6 VDC

1. Input Current @ 12.8VDC Operation 4.1A

1. Input Power 53 W

1. Output Power 46 W

1. Output Energy 11 Joules

1. Power per Flasher Head 11.5W

1. LED Head (2) Outputs N/A N/A 4 amps/hd 4 amps/hd

1. Flasher Outlets 4

1. Fuse 7.5-amp Auto Fuse

5) Fully Enclosed Firearm/Security Vault.

6) Install additional emergency lights, 2 per side, rear doors, preferably between K-9 window screen and window or at a location to provide side visibility. Rear lights shall be visible with rear doors or hatch open.

7) Add 5% Window tinting to rear windows.

8) Add dome light inside K-9 platform, switch to be accessed from driver seat.

9) Ignition Over-ride – Switch mounted on dash allowing removal of car keys, leave vehicle and accessories running, with vehicle locked in park and K9 secured inside kennel. Disabled by placing foot on brake.

10) Hood vents/louvers – Installed to have vehicle secure and running with AC on without opening hood to dissipate heat and leaving vehicle’s wiring components exposed to public, etc.

11) Ace K-9 Heat Alarm Pro (http://www.radiotronics.com/)

· Product ID: HA-2510 B – To be installed within reach of driver

· Engine stall sensor

· No K-9 left behind feature

· No auto start software upgrade

· Add 12” Fan (HA-FKT-12) – Fan to be installed on passenger side rear door of vehicle

· Add Heavy duty fan guard (HA-FWG)

· Add long range remote with glass mount antenna (HA-RBM-TG)

12) American Aluminum EZ Ride Platform for Ford Expedition (or equivalent) (www.ezrideronline.com)

· Add gray powder coating for K9 units

· Add deluxe, Non-Toxic, Custom-fit rubber mat (small)

· No Water bowl

· Emergency escape door window guards.

13) Trucks to be equipped with ARE “Toolmaster CX -Series” caps with side access and rear solid panel lift-up hatch and front solid panel. The cap shall be painted to match the body in base coat/clear coat paint. The paint quality shall be equal to or better than the OEM finish of the pickup. The hatches shall include a door lock, alarm, remotes. Caps shall include interior lighting.

14) This system shall be a “Truck Vault-Magnum 2- Drawer” style, with cipher locks and a slide out tray mounted, that is designed to fit between the side compartments, to the top of the “truck vault” capable of supporting 250 lbs. at 100% extension installed in the rear and connected to the main floor structure to support the weight when fully extended. The slide unit shall latch in the stored, halfway and fully extended positions. Mounted to the slide system shall be side walls formed .125” aluminum tray with fully welded corners 6” tall on the sides so equipment cannot jam against side compartments and a 16” back so equipment cannot fall off of the back of the tray when extended. Secondary locking latches shall be installed to secure to drawers for secure storage in addition to cipher locks.

h) Vehicle Package 8/Full-size Pickup Trucks ATF CFI Responder.

CHASSIS AND BASE VEHICLE:

Shall be supplied by ATF. Vendor must have a current drop ship number for their specific location of manufacturing.

· At a minimum, a Ford F250 Crew Cab (or equivalent), short bed, 156” WB Pickup, 4x4 with XL Package

· 6.2L SOHC 2-valve Flex Fuel V8 engine gas engine

· 6 Speed Heavy Duty electronic Automatic Transmission with power take off provision

· Shift on the fly transfer case

· LT275/65R18E BSW All Terrain Tires on aluminum wheels

· HD locking rear differential

· Power telescoping mirrors

· Heavy service front suspension package

· Engine block heater

· Cab Steps

· Skid plate package

· Adjustable pedals and remote start

· 6-way power driver’s seat

· Front center console/armrest

· AM-FM Stereo with auxiliary input

· Rear proximity sensors

· Rear view camera with color display

ENGINE AND ELECTRICAL

EMERGENCY VEHICLE ELECTRICAL SYSTEM: Leave the factory alternators in place to retain the full factory warranty.

UNDER HOOD WIRING: On the firewall towards the passenger side shall be a fabricated aluminum mounting plate containing a 150-amp master circuit breaker with manual disconnect, a 300-amp solenoid operating when a Havis Charge Guard (CG-X) is activated and a 40-amp constant power circuit breaker. The aluminum electrical panel shall be mounted in an area not to interfere with any engine operation, fluid checks, factory equipment or service. Each component shall include an engraved panel indicating the function and rating of each component. All vendor supplied aftermarket wiring shell be enclosed in high temperature black split loom with a permanent red stripe to differentiate the aftermarket wiring from the factory wiring. A detailed wiring diagram shall be included with each conversion and a sample must be included with the bid.

120 VOLT AC POWER

INVERTER AND WIRING: One 2,400-watt pure sine wave inverter shall be mounted in the electrical area and properly vented against overheating. Inverter shall be installed and mounted in the interior cab compartment behind rear seat. The inverter shall be wired to the battery system with the appropriate size cable and include a fuse that is easily accessible. Included shall be a remote on-off switch installed in a location to be determined at the pre-construction conference. All interior outlets shall include a metal weatherproof box with screw in connectors and screw in covers for any non-used ports. The outlet must be a high quality 20-amp duplex outlet with a stainless-steel cover. Wiring must be stranded 12/3 boat cable to withstand the rigors of vehicle installed systems. The use of solid wire such as Romex shall be unacceptable and reason for rejection. All wiring shall be routed to be protected against chafing, all metal holes shall include a snap ring grommet and all wiring shall be covered in split loom. Outlets shall be located in the front passenger, side storage compartment and at the rear hatch near tailgate.

EXTERIOR

REAR BED ENCLOSURE: ARE “Toolmaster CX -Series” (or equivalent) with side storage compartments and rear solid panel lift up hatch and front solid panel. The cap shall be painted to match the body in base coat/clear coat paint. The paint quality shall be equal to or better than the OEM finish of the pickup, (Tuxedo Black). The hatches shall include a power door lock and be integrated into the factory system, alarm and remotes. A 12V power outlet shall be located in the side storage compartments (location TBD).

REAR BED STORAGE UNIT: This system shall be a “Truck Vault-Magnum 2-Drawer” (or equivalent) style, with cipher locks and a slide out tray mounted, that is designed to fit between the side compartments, to the top of the “truck vault” capable of supporting 2,000 lbs. at 100% extension installed in the rear and connected to the main floor structure to support the weight when fully extended. The slide unit shall latch in the stored, halfway and fully extended positions. Mounted to the slide system shall be side walls formed .125” aluminum tray with fully welded corners 6” tall on the sides so equipment cannot jam against side compartments and a 16” back so equipment cannot fall off the back of the tray when extended.

INTERIOR LIGHTING: Four high power round white/red LED flood lights with a chrome bezel and a dome lens. Two mounted on the ceiling of the cap and two on the rear hatch to illuminate the pull out when stored or deployed. The lights will have the capability of red and white colors and be operated both from the Whelen HHS-2200 (or equivalent) handheld siren and light controller and switches located in the rear compartment. The side tool compartments shall contain LED lighting.

CAB INTERIOR

12VOLT ELECTRICAL: There is to be located in the cab a Havis Charge Guard (CG-X) (location TBD) the charge guard shall control the 300amp relay located under the hood. There shall be an eight-position fused distribution panel with a ground distribution block located in the cab (location TBD), the distribution panel shall feed from the 300-amp relay under the hood. All electrical components shall feed from this distribution panel.

AUXILLARY POWER POINT: An Able model ABL-14.0553 (or equivalent) triple 12V power outlet shall be located in the side compartments.

WIRING: Included with this conversion is a harness system throughout the vehicle including OEM factory style plugs and connectors. All wiring shall be GXL wire function coded every 4”, and the harness system utilizing a minimum of 10 different colors and shall be protected with high temperature convoluted loom. There are no splices or connectors within any harness and anywhere it passes through a wall a snap ring grommet is included. OEM factory style plug in connectors is used where possible eliminating unnecessary cutting and splicing into factory wiring.

WEAPON’S SECURITY: Supply and install a SafeBOX (or equivalent) portable safe with a permanently mounted steel under a seat in a location to be determined. The SafeBOX shall slide into the sleeve and lock in place.

TINT: Front driver and passenger windows to be tinted to 20%. Rear driver’s side and passenger side windows to be tinted to 5%.

EMERGENCY WARNING LIGHTING AND EQUIPMENT

BEHIND WINDSHIELD LIGHTING: Two Whelen SFIONJ (or equivalent) dual LED lights (colors shall be red and blue) behind the windshield above the rear-view mirror on a vehicle specific, custom aluminum bracket finished in black powder coat finish. The bracket mounts into OEM mounting points and shall not interfere with the fabric of the headliner and be very solid.

GRILL LIGHTS: Two Whelen IONJ (or equivalent) LED flashers with black flanges mounted behind the grille and wired to the console. Lighting must be mounted in a covert fashion and include clear lenses; colors shall be red and blue.

HEADLIGHT INSERTS: Two VTX609 C LED (or equivalent) inserts, one mounted into each head light housing and sealed so no moisture can enter the head light assemblies. LED lights shall be wired to the control system in the front console. LED color shall be white.

TAIL LIGHT INSERTS: Four Whelen Vertex (or equivalent) LED inserts, two mounted in each tail light housing, red in the tail light and blue in the reverse light and sealed so no moisture can enter the head light assemblies. LED lights shall be wired to the control system in the front console. LED color shall be white and red.

REAR LIGHTING: Two Whelen IONJ (or equivalent) dual LED lights wired to the siren and light controller. LED color shall be Blue and Red and mounted in a concealed location.

SIDE (CURB) LIGHTING: Two each side of vehicle one Whelen IONJ dual LED lights wired to the siren and light controller. LED color shall be Blue and Red and mounted in a concealed location.

SIREN: Whelen HHS-2200 (or equivalent) hand held siren and light controller installed by the center of the dash accessible by the driver only when needed.

BEHIND REAR HATCH LIGHTING: Two dual white/red LED flood lights mounted behind the rear hatch shall operate when the rear hatch is opened. There shall be a momentary rocker switch mounted on the right side trim wired to a cancel circuit and shall cancel these lights when depressed and shall automatically reset and reactivate when the doors or hatch are closed and reopened.