ATTACHMENT A - MANUFACTURER SPECIFICATIONS _ DRAWING.pdf
PDF 924 KB Posted
- Solicitation number
- RFB-UC24-143C
- Issued by
- Ulster County, New York
About this file
The document is a manufacturer specification sheet and detailed drawing for a Milnor MWF27J8 60 lb. (27kg) capacity suspended washer-extractor, prepared for the Ulster County Sheriff's Department's procurement of a new laundry machine for the Ulster County Law Enforcement Center (UCLEC) in Kingston, NY. The specification sheet details a commercial-grade washer with key features including RinSave® water-saving technology, 7 processing speeds, an E-P PLUS programmable controller, a single-motor inverter drive, and a 5-year limited warranty on the frame, cylinder, and shell.
The washer-extractor offers multiple electrical configuration options (ranging from 208V to 480V) and requires specific installation considerations, including foundation preparation with anchor bolt holes and minimum grout specifications. The machine provides advanced capabilities such as six liquid chemical injection ports, a fresh-water flushing chemical manifold, and a 300-G high extract for excellent moisture removal. Optional features include steam, electric heat, and a 5-compartment flushing supply injector. The specification sheet emphasizes efficiency benefits like water and energy savings, reduced fabric wear, improved wash quality, and potential labor cost reductions through faster processing times.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LEGEND
C Cold water inlet .75” (19 mm) GHT
D Drain to sewer 3” (76 mm) PSJ
E Electrical connection
F Foundation pads; anchor bolt holes 1.06” (27mm)
G Chemical flush .75” (19 mm) NPT
H Hot water inlet .75” (19 mm) GHT
L1 Soap Chute
L2 Liquid Supply Inlets
MWF27J8
60 LB. (27KG) CAPACITY
SUSPENDED WASHER-EXTRACTOR
SPECIFICATION SHEET
MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS
Capacity – lb. (kg) 60 (27)
Cylinder Diameter x Depth – ins (mm) 30 x 22 (762 x 559)
Cylinder Volume – cu. ft. (L) 9 (255)
Door Opening – in. (mm) 15.63 (397)
Machine Dimensions (W x D x H) – in. (mm)
39.63x57.51x65.5 (1007x1461x1664)
Shipping Dimensions (W x D x H) – in. (mm)
45.28x59.06x71.97 (1150x1500x1828)
Motor – HP (kW) 5 (3.7)
Wash Speeds – RPM 38-43
Distribution Speed – RPM 68
Max. Final Extract – RPM 840
Extraction G-Force 300
Static Weight – lb. (kg) 2355 (1068)
Max. Dynamic Load RMS – lb. (kg) 360 (163)
Frequency (Hz) 14
Water Pressure (Required) psi (bar) 10-75 (0.69-5.17)
Water Valve Cv Rating at 72°F (22°C) 4.66 (17.64)
Minimum Recommended Distance Between Machines – in. (mm)
12 (305)
See Fuse and Wire Size manual MAEFUSE1BE for safety information.
Contact factory regarding single phase availability.
Voltage Running
Amps Fuse
(Amps) Circuit Breaker
(Amps)
220/3/50-60 13 FRN20 20
208, 240/1/60 16, 15 FRN25 25
208, 240/3/60 14, 13 FRN20 20
380/3/50-60 8 FRS15 15
415/3/50 8 FRS15 15
480/3/60 7 FRS15 15
▼ See dimensional drawing for complete details.
It is the sole responsibility of the owner/user to assure that the floor and/or any other supporting structure exceeds not only all applicable building codes, but also that the floor and/or any other supporting structure for each washer-extractor or group of washer-extractors has sufficient strength and rigidity (i.e., a natural or resonant frequency many times greater than the rotational machine speed with a reasonable factory of safety) to support the weight of all the fully loaded machine(s) including the weight of the water and goods, and including the published 360º rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the factory for additional machine data for use by a structural engineer.
B22SS13009/24124 Page 1 of 2
MWF27J8
60 LB. (27KG) CAPACITY
SUSPENDED WASHER-EXTRACTOR
SPECIFICATION SHEET
Standard Features:
RinSave® water saving technology
7 speeds (2 wash, 1 distribution, 1 RinSave, 3 extract)
E-P PLUS programmable controller
Back-lit LCD display
Single-motor inverter drive
Tall, lifting ribs
Tapered roller bearings
High M.A.F. (Mechanical Action Factor)
Large cylinder perforations
Fresh-water flushing chemical manifold
Six (6) liquid chemical injection ports
Control reads in English/second language
5-year limited warranty on frame, cylinder & shell
Why Purchase Milnor?
RinSave® water saver in conjunction with large cylinder perforations provides more efficient rinsing. BENEFIT: Saves water, energy, and time.
Larger cylinder volume than most competitive similar sized washer-extractors provides greater productivity. More linen washed per day, or fewer hours required to process. BENEFIT: Saves labor.
Greater cylinder perforated-area generates better wash quality, better rinsing and better extraction. BENEFIT: Better extraction saves dryer fuel.
Faster process times reduce fabric wear, promoting longer linen life!
BENEFIT: Saves linen replacement costs.
Tall perforated ribs provide excellent lift and high drop.
BENEFIT: Greater mechanical action (M.A.F.) leads to better wash quality.
300-G high extract provides excellent moisture removal. Lower extract speeds are available for uniforms, delicate textiles and blended fabrics.
BENEFIT: Better extraction saves dryer fuel.
E-P Plus Controller with back-lit LCD display allows operator to choose formulas from real words, not codes. Standard controller features English/Spanish (other languages optional). Controller also provides diagnostic and error messages.
Shortens training time of new employees.
BENEFIT: Fewer operator errors.
Superior product support through local, highly-skilled dealers.
BENEFIT: Faster repairs mean less downtime.
Contact Milnor for your local, authorized dealer:
Pellerin Milnor Corporation P.O. Box 400 ● Kenner, LA 70063 t: 504-467-9591 ● f: 504-468-3094
Safe chemical injection
Superior cylinder design
SmoothCoil™ 4 Point Suspension System
Optional Features:
Steam
Electric heat
5 compartment flushing supply injector
B22SS13009/24124 Page 2 of 2
File details come from the government source that posted it. Updated .