Attachment A-Cutting Machine Specifications.pdf
PDF 83 KB Posted
- Attached to
- Cutting Machine and Cutting Wheel Federal contract opportunity
- Solicitation number
- N4215824QE062
About this file
This document is an attachment that provides the specifications for a custom Omega seal cutting machine required under a federal contract opportunity. The cutting machine must meet specific requirements, including being custom designed for cutting Omega seals with an outer diameter of 12.74 inches, having a self-centering clamp system, and including various components such as a stationary frame, rotating ring assembly, cutter wheel tool slides, and an air drive assembly.
The related federal contract opportunity is a pre-solicitation for a cutting machine and cutting wheel, solicitation number N4215824QE062, to be sole-sourced to E.H. Wachs or its authorized distributor. The cutting machine must meet the specifications outlined in this attachment, and the cutting wheel must meet the specifications in Attachment B. The government requires delivery by 1/31/2025 to allow for testing, development of work practices, personnel training, and any necessary adjustments prior to shipboard operations.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sources Sought - Cutting Machine and Cutting Wheel.pdf | ||
| Attachment B-Cutting Wheel Specifications.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page: 1 of 1
OMEGA SEAL CUTTING MACHINE SPECIFICATIONS – ATTACHMENT A
REQ DOC NO.
N42158-4151ZN01
ITEM
NO.
SUPPLIES/SERVICES QTY UNIT
CUTTING MACHINE SHALL MEET THE FOLLOWING SPECIFICATIONS:
CUTTING MACHINE
CUSTOM OMEGA SEAL CUTTING MACHINE,
FOR CHIP-LESS WHEEL CUTTING OPERATIONS ON OMEGA SEALS WITH AN OD
OF 12.74”, CLAMP AREA IS A SHAFT WITH .26-DEGREE ANGLE TO CENTER
LINE, STARTING AT MAX 8.78” DIAMETER, E. H. WACHS REF. NO. 24-034-5000-00
7 EA
CUSTOM OMEGA SEAL CUTTING MACHINE CONSISTS OF
- STATIONARY FRAME & ROTATING RING ASSEMBLY
- SELF-CENTERING CLAMP SYSTEM
- (2) CUTTER WHEEL TOOL SLIDES ASSEMBLIES WITH FEED TRIP MECHANISM
- (4) REMOVABLE HEIGHT PINS FOR SETTING MACHINE ELEVATION TO CUT
PLANE
- HEAVY DUTY AIR DRIVE ASSEMBLY
- OPERATING HAND TOOLS
- MANUAL WITH BOM AND ASSEMBLY DRAWINGS
- STORAGE CASE
- FACTORY ACCEPTANCE TESTING
CERTIFICATE OF COMPLIANCE REQUIRED
File details come from the government source that posted it. Updated .