Attachment 6 Compatible Example DN_60602-FireWarden-100.pdf

DN-60602:A1 • 12/07/2010 — Page 1 of 6

FireWarden-100-2(E) Rev 3 Intelligent Addressable FACP

Addressable Fire Alarm Control Panel

DN-60602:A1

1c ov

.jp g

General The Notifier FireWarden-100-2 Rev 3 (NFW2-100) with Version

5.0 firmware is a combination FACP (Fire Alarm Control Panel) and DACT (Digital Alarm Communicator/Transmitter) all on one circuit board. This compact intelligent addressable control panel has an extensive list of powerful features.

The SLC (Signaling Line Circuit) of the FireWarden-100-2 Rev 3 operates using a Rapid Group Polling communication protocol technology that polls multiple devices simultaneously for a quicker device response time.This patented technology allows a fully-loaded panel with up to 198 devices to report an incident and activate the notification circuits in under 10 seconds. With this improved polling, devices can be wired on standard twisted, unshielded wire up to a distance of 10,000 feet.

The ’s quick-remove chassis protects the electronics during con-struction. The backbox can be installed allowing field wiring to be pulled. When construction is completed, the electronics can be quickly installed with just two bolts.

New features for Rev 3 with Version 5.0 firmware include removable terminal blocks, improved transient protection, addi-tional secondary ANN-BUS, and increased power for the reset-table and remote sync outputs.

Available accessories include ANN-BUS devices as well as ACS LED, graphic and LCD annunciators, and reverse polarity/city box transmitter.

The integral DACT transmits system status (alarms, superviso-ries, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. It also allows remote and local pro-gramming of the control panel using the PS-Tools Upload/Down-load utility. In addition, the control panel may be programmed or interrogated off-site via the public switched telephone network.

Any personal computer with Windows® XP or greater, a com-patible modem, and PS-Tools—the Upload/Download software kit—may serve as a Service Terminal. This allows download of the entire program or upload of the entire program, history file, walktest data, current status and system voltages. The panel can also be programmed through the FACP’s keypad or via a standard PS-2 computer keyboard, which can be plugged directly into the printed circuit board. This permits easy typing of address labels and other programming information.

Version 5.0 firmware supports the following: Primary and Sec-ondary ANN-bus devices, NP-A100, USB port, NAC circuit diag-nostics, a new report has been added to the walk-test that lists untested devices, new device types added: audio telephone type code for NFV-25/50ZST, Photo Supervisory and auto-reset-table Drill (non-latching).

The FireWatch Series internet monitoring modules IPDACT-2 and IPDACT-2UD permit monitoring of alarm signals over the Internet saving the monthly cost of two dedicated business tele-phone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line.

NOTE: Unless otherwise specified, the term “FireWarden-100-2” is used in this document to refer to both the FireWarden-100-2 and the FireWarden-100-2E FACPs (Fire Alarm Control Panels). Like-wise, “NFW2-100” refers to NFW2-100E as well.

Features

• Listed to UL standard 864, 9th edition.

• On-board DACT.

• Remote site or local USB port upload/download, using PS- Tools.

• Four (4) Style Y (Class B) NAC circuits, which can be con-verted to four (4) Style Z (Class A) circuits with optional ZNAC-92 converter module. (Up to 6.0 amps total NAC power when using optional XRM-24B.)

• Selectable strobe synchronization for System Sensor, Whee-lock, and Gentex devices.

• Remote Acknowledge, Silence, Reset and Drill via address-able monitor modules or FDU-80, N-ANN-80 or Legacy ACS Annunciators.

• ANN-BUS for connection to following optional modules (cannot be used if ACS annunciators are used):

– N-ANN-80(-W) Remote LCD Annunciator

– N-ANN-I/O LED Driver

– N-ANN-S/PG Printer Module

– N-ANN-RLY Relay Module

– N-ANN-LED Annunciator Module

– N-ANN-RLED Annunciator Module alarms only

– ROME Relay Option Module Enclosure

• ACS & Terminal-mode Annunciators:

– ACS Annunciators: Up to 32 Legacy ACM Series annuncia-tors (ACM-16AT or ACM-32 series). Cannot be used if ANN-BUS devices are used.

– Terminal-mode Annunciators: Up to 32 Legacy FDU-80 annunciators.

• EIA-232 printer/PC interface (variable baud rate) on main cir-cuit board, for use with optional UL-listed printer PRN-6.

• Integral 80-character LCD display with backlighting.

• Real-time clock/calendar with automatic daylight savings control.

• Detector sensitivity test capability (NFPA 72 compliant).

Page 2 of 6 — DN-60602:A1 • 12/07/2010

• History file with 1,000-event capacity.

• Maintenance alert warns when smoke detector dust accumu-lation is excessive.

• Automatic device type-code verification.

• One person audible or silent walk test with walk-test log and printout.

• Point trouble identification.

• Waterflow (nonsilenceable) selection per monitor point.

• System alarm verification selection per detector point.

• PAS (Positive Alarm Sequence) and presignal delay per point

(NFPA 72 compliant).

NOTE: Only detectors may participate in PAS.

SLC LOOP:

• SLC can be configured for NFPA Style 4, 6, or 7 operation.

• SLC supports up to 198 addressable devices per loop (99 detectors and 99 monitor, control, or relay modules).

• SLC loop maximum length 10,000 ft. (3,000 m.).

See installation manual for wire tables.

NOTIFICATION APPLIANCE CIRCUITS (NACS):

• Four onboard NACs with additional NAC capability using out-put control modules (NC-100). The four Class B NACs can be converted to four Class A NACs with optional ZNAC-92 converter module.

• Silence Inhibit and Auto Silence timer options.

• Continuous, March Time, Temporal or California code for main circuit board NACs with two-stage capability.

• Selectable strobe synchronization per NAC.

• 2.5 amps maximum per each NAC circuit.

NOTE: Maximum 24VDC system power output is shared among all NAC circuits and 24VDC special-application auxiliary power outputs. Total available output is 3.0 amps. Using the optional XRM-24B transformer increases 24VDC output to 6.0 amps.

PROGRAMMING AND SOFTWARE:

• Autoprogram (learn mode) reduces installation time.

• Custom English labels (per point) may be manually entered or selected from an internal library file.

• Three Form-C relay outputs (two programmable).

• 99 software zones.

• Continuous fire protection during online programming at the front panel.

• Program Check automatically catches common errors not linked to any zone or input point.

• OFFLINE PROGRAMMING: Create the entire program in your office using a Windows®-based software package (NFW2-100 requires PS-Tools Programming software, avail-able on www.magni-fire.com). Upload/download system pro-gramming locally to the NFW2-100 Rev 3 in less than one minute.

• USB upload/download programming with standard Male-A to Male-B cable.

User Interface

LED INDICATORS

• AC Power (green)

• Fire Alarm (red)

• Supervisory (yellow)

• Alarm Silenced (yellow)

• System Trouble (yellow)

• Maintenance/Presignal (yellow)

• Disabled (yellow)

• Battery Fault (yellow)

• Ground Fault (yellow)

KEYPAD CONTROLS

• Acknowledge/Step

• Alarm Silence

• Drill

• System Reset (lamp test)

• 16-key alpha-numeric pad (similar to telephone keypad)

• 4 cursor keys

• Enter

Product Line Information NFW2-100: FireWarden-100-2 Rev 3 198-point addressable Fire Alarm Control Panel, one SLC loop. Includes 80-character LCD display, single printed circuit board mounted on chassis, and cabinet. 120 VAC operation.

NFW2-100R: Same as NFW2-100, except in a red backbox.

NFW2-100E: Same as NFW2-100, except with 240 VAC opera-tion.

4XTM Reverse Polarity Transmitter Module: Provides super-vised output for local energy municipal box transmitter, alarm, and trouble.

ZNAC-92: Optional converter module which converts four (4) Style Y (Class B) NAC circuits to four (4) Style Z (Class A) cir-cuits.

PS Tools: Programming software for Windows®-based PC computer (cable not included), available on www.firelite.com.

DP-9692B: Optional dress panel for FireWarden-100-2 Rev 3.

TR-CE-B: Optional trim Ring for semi-flush mounting.

BB-26: Battery backbox, holds up to two 26 AH batteries and

CHG-75.

NFS-LBB: Battery box, houses two 55 AH batteries.

CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH.

CHG-120: Remote battery charging system for lead-acid batter-ies with a rating of 55 to 120 AH. Requires additional NFS-LBB for mounting.

NOTE: CHG-120 or CHG-75 required for batteries larger than

18AH.

BAT Series: Batteries, see data sheet DN-6933.

XRM-24B(E): Optional transformer. Increases system power output to 6.0 amps. Use XRM-24BE with FireWarden-100-2E Rev 3.

PRT/PK-CABLE: Cable printer/personal computer interface cable; required for printer or for local upload/download program-ming and updating panel firmware.

PRN-6: UL listed compatible event printer. Uses tractor-fed paper.

IPDACT-2/2UD, IPDACT Internet Monitoring Module: Mounts in bottom of enclosure with optional mounting kit (PN IPBRKT).

Connects to primary and secondary DACT telephone output ports for internet communications over customer provided ether-net internet connection. Requires compatible Teldat VisorALARM Central Station Receiver. Can use DHCP or static IP. (See data sheet DN-60408 for more information.)

IPBRKT: Mounting kit for IPDACT-2/2UD in common enclosure.

IPSPLT: Y-adaptor option allows connection of both panel dialer outputs to one IPDACT-2/2UD cable input.

COMPATIBLE ANNUNCIATORS

N-ANN-80(-W): LCD Annunciator is a remote LCD annunciator that mimics the information displayed on the FACP LCD display.

Recommended wire type is un-shielded. (Basic model is black;

order -W version for white; see DN-7114.)

DN-60602:A1 • 12/07/2010 — Page 3 of 6

N-ANN-LED: Annunciator Module provides three LEDs for each zone: Alarm, Trouble and Supervisory. Ships with red or black enclosure (see DN-60242).

N-ANN-RLED: Provides alarm (red) indicators for up to 30 input zones or addressable points. (See DN-60242).

N-ANN-RLY: Relay Module, which can be mounted inside the cabinet, provides 10 programmable Form-C relays. (See DN- 7107.)

ROME-B: Relay Option Module Enclosure (order ROME-B for black or ROME for red). Provides one N-ANN-RLY Relay Mod-ule already installed. The ROME Series provides mounting space for one additional Relay Module or one addressable Multi-module. (See Installation Sheet PN 53530.)

N-ANN-S/PG: Serial/Parallel Printer Gateway module provides a connection for a serial or parallel printer. (See DN-7103.)

N-ANN-I/O: LED Driver Module provides connections to a user supplied graphic annunciator. (See DN-7105.)

ACM-8R: Relay module provides 8 Form-C 5.0 amp relays.

ACM Annunciator Series: LED-type fire annunciators capable of providing up to 99 software zones of annunciation. Available in increments of 16 or 32 points to meet a variety of applications.

LDM Graphic Series: Lamp Driver Module series for use with custom graphic annunciators.

FDU-80 (Liquid Crystal Display) point annunciator: 80-char-acter, backlit LCD-type fire annunciators capable of displaying English-language text.

NOTE: For more information on Compatible Annunciators for use with the FireWarden-100-2 Rev 3, see the following data sheets (document numbers) ACM-8R (DN-3558), ACS/ACM Series (DN- 0524), LDM Series (DN-0551), FDU-80 (DN-6820).

COMPATIBLE ADDRESSABLE DEVICES

All feature a polling LED and rotary switches for addressing.

NI-100: Addressable low-profile ionization smoke detector.

NP-100: Addressable low-profile photoelectric smoke detector.

NP-100T: Addressable low-profile photoelectric smoke detector with thermal sensor.

NP-100R: Addressable remote test capable detector for use with DNR(W) duct smoke detector housings.

NH-100: Fast-response, low-profile heat detector.

NH-100R: Fast-response, low-profile heat detector with rate-of-rise option.

NH-100H: Fixed high-temperature detector that activates at 190F/88C.

NP-A100: Addressable low-profile multi-sensor detector.

DNR: Innovair Flex low-flow non-relay duct-detector housing.

Order NP-100R separately.

DNRW: Innovair Flex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order NP-100R separately.)

NMM-100: Addressable Monitor Module for one zone of nor-mally-open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Module may be configured for either a Style B (Class B) or Style D (Class A) IDC.

NDM-100: Dual Monitor Module. Same as NMM-100 except it provides two Style B (Class B) only IDCs.

NMM-100P: Miniature version of NMM-100. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox.

NZM-100: Similar to NMM-100, but may monitor up to 20 con-ventional two-wire detectors. Requires resettable 24 VDC power. Consult factory for compatible smoke detectors.

NC-100: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appliances.

Mounts directly to a 4.0" (10.16 cm.) electrical box. Notification

Appliance Circuit option requires external 24 VDC to power noti-fication appliances.

NC-100R: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch.

Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500.

NOT-BG12LX: Addressable manual pull station with interface module mounted inside.

N100-ISO: Fault Isolator Module. This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 oper-ation).

SMB500: Used to mount all modules except the NMM-100P.

NMM-100-10: Ten-input monitor module. Mount one or two modules in a BB-XP cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-25.

NZM-100-6: Six-zone interface module for compatible conven-tional two-wire detectors. Mount one or two modules in a BB-XP cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-25.

NOTE: For more information on Compatible Addressable Devices for use with the FireWarden-100-2 Rev 3, see the following data sheets (document numbers): N100-ISO (DN-6994), NP-100 series (DN-6995), NI-100 (DN-6996), NH-100 series (DN-6997), ND-100 series (DN-7006), NP-A100 (DN-6998), NMM-100/NMM-100P/

NDM-100/NZM-100 (DN-6999), NC-100/NC-100R (DN-7000),

NOT-BG12LX (DN-7001), NMM-100-10 (DN-6990), and NZM-

100-6 (DN-60150).

Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interference. Wire size should be no smaller than 18 AWG (0.78 mm²) and no larger than 12 AWG (3.1 mm²). The wire size depends on the length of the SLC circuit. Refer to the panel manual for wiring details.

Page 4 of 6 — DN-60602:A1 • 12/07/2010 sy s2

.w m f

ANNUNCIATORS

ACS/ACM, LDM

ANN-BUS DEVICES

N-ANN-80, N-ANN-LED,

N-ANN-S/PG, N-ANN-I/O

ANN-BUS

or

EIA-485

in ACS mode (two wires)

8 FORM-C, 5-AMP RELAYS

(optional, order ACM-8R)

Optional

REVERSE

POLARITY/

CITY BOX

OUTPUT

(4XTM)

NACs (Notification Appliance Circuits)

BELLS, SIGNALS, STROBES

EIA-232

INTERFACE

(PIM-24) built into the motherboard

FireWarden-100-2 Rev 3 Fire Alarm Control/ Communicator

NOTE: System can use either ANN-BUS devices OR ACS-mode annunciators.

They cannot be used simultaneously.

NOTE: System can use either the printer OR the FDU-80. They cannot be used simultaneously.

EIA-485

INTERFACE

(four wires)

FDU-80

Up to 6,000 ft. (1825.8 m) between each FDU-80 in the EIA-485 loop, and between each FDU-80 and the FACP.

DUCT DETECTORS

ND-100, ND-100R, DNR

HEAT DETECTORS

NH-100, NH-100R, NH-100H

SMOKE DETECTORS

NP-100, NP-100T,

NI-100, NP-A100

MONITOR/CONTROL

NMM-100, NZM-100,

NDM-100, N100-ISO,

NC-100, NC-100R

ADDRESSABLE

MULTI-MODULE

NZM-100-6, NMM-100-10

MINI-MONITOR

NMM-100P

PULL STATION

NOT-BG12LX

PRINTER

24 VDC

24 VDC

DN-60602:A1 • 12/07/2010 — Page 5 of 6

Page 6 of 6 — DN-60602:A1 • 12/07/2010

System Capacity

• Intelligent Signalling Line Circuits

• Addressable device capacity

• Programmable software zones

• ACS Annunciators

• ANN-bus devices

Electrical Specifications AC Power: FireWarden-100-2 Rev 3: 120 VAC, 60 Hz, 3.0 amps. FireWarden-100-2 Rev 3(E): 240 VAC, 5 0 Hz, 1.5 amps.

Wire size: minimum 14 AWG (2.00 mm²) with 600 V insulation.

Battery charger capacity: 7 AH - 18 AH batteries. Up to two 18 Ah batteries can be housed in the FACP cabinet. Larger batter-ies require an external battery charger such as the CHG-75 or CHG-120, and a separate battery cabinet such as the BB-26 or

NFS-LBB.

Communication Loop: Supervised and power-limited.

Notification Appliance Circuits: Each terminal block provides connections for two Style Y (Class B) for a total of four Style Y (Class B) or with an optional ZNAC-92 module converts to four Style Z (Class A) NACs. Maximum signaling current per circuit:

2.5 amps. End-of-Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252 UL listed) for Style Y (Class B) NAC. Refer to panel documenta-tion and Notifier Device Compatibility Document for listed com-patible devices.

Two Programmable Relays and One Fixed Trouble Relay:

Contact rating: 2.0 amps @ 30 VDC (resistive), 0.5 amps @ 30 VAC (resistive). Form-C relays.

Special Application Non-resettable Power (24 VDC Nomi-nal): Jumper selectable (JP4) for conversion to resettable power output. Up to 1.0 amp total DC current available from each out-put. Power-limited.

Special Application Resettable Power (24 VDC nominal):

Jumper selectable (JP6) for conversion to non-resettable power.

Up to 1.0 amp total DC current available. Refer to the Notifier Device Compatibility Document for listed compatible devices.

Remote Sync Output: Remote power supply synchronization output. Nominal special application power: 24 VDC. Maximum current: 300 mA. End-of-Line Resistor: 4.7K ohm. Output linked to NAC 1 control. Supervised and power-limited.

Telephone Interface: Unless used with Teldat VISORALARM, requires dedicated business telephone number with a minimum of 5 volts DC (off-hook voltage). Obtain dedicated phone line directly from your local phone company. Do not use shared phone lines or PBX (digital) type phone line extensions.

Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.12" (.30 cm.) deep. Backbox: 19.00" (48.26 cm.) high x 16.65"

(42.29 cm.) wide x 5.20" (13.34 cm.) deep. Trim Ring (TR-CE- B): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide.

Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00” (50.80 cm.)

high x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep.

Temperature and Humidity Ranges This system meets NFPA requirements for operation at 0 – 49°C/32 – 120°F and at a relative humidity 93% ± 2% RH (non-condensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic compo-nents may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 – 27°C/60 – 80°F.

NFPA Standards The FireWarden-100-2 Rev 3 complies with the following NFPA 72 Fire Alarm Systems requirements:

– LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervisory).

– AUXILIARY (Automatic, Manual and Waterflow) (requires

4XTM).

– REMOTE STATION (Automatic, Manual, Waterflow and Sprinkler Supervisory) (Where a DACT is not accepted, the alarm, trouble and supervisory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTM is required.)

– PROPRIETARY (Automatic, Manual, Waterflow and Sprin-kler Supervisory).

– CENTRAL STATION (Automatic, Manual, Waterflow and Sprinkler Supervisory).

– OT, PSDN (Other Technologies, Packet-switched Data Net-work)

Agency Listings and Approvals The listings and approvals below apply to the basic FireWarden- 100-2 Rev 3 control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.

• UL Listed: S635

• FM approved

• CSFM: 7165-0028:0235

• MEA: 120-06-E, Volume 2

For ULC-listed version, see DN-60600.

NOTIFIER® is a registered trademark of Honeywell International Inc.

Wheelock® is a registered trademark of and Exceder™ is a trademark of Cooper Notification.

©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.

Made in the U.S. A.

This document is not intended to be used for installation purposes.

We try to keep our product information up-to-date and accurate.

We cannot cover all specific applications or anticipate all requirements.

All specifications are subject to change without notice.

For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.

www.notifier.com

SYSTEM SPECIFICATIONS