Attachment 5- Technical Compliance Crosswalk_SOL C2PL2253.xlsx
XLSX spreadsheet 13 KB Posted
- Attached to
- Pan Tilt Zoom (PTZ) Camera Assembly for a Flight Deck Video System (FDVS) Federal contract opportunity
- Solicitation number
- 70Z04422RC2PL2253
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis_Solicitation_C2PL2253_Amend 0001.pdf | ||
| SF-30_Amendment 0001_SOL 70Z04422RC2PL2253.pdf | ||
| CDRL A001_Technical Manual_PTZ Camera_SOL C2PL2253.pdf | ||
| Attachment 1- Tech Specification_SOL C2PL2253.pdf | ||
| Attachment 4- DHS_Form_700-21_SOL C2PL2253.pdf | ||
| Attachment 2_Pricing Schedule_SOL C2PL2253.xlsx | XLSX spreadsheet | |
| Attachment 3- MarkingsPackagingDeliveryInspect_SOL C2PL2253.pdf | ||
| Combined Synopsis_Solicitation_C2PL2253.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 5
| Solicitation 70Z04422RC2PL2253 |
| Attachment 5 - Technical Compliance Crosswalk |
| Please complete the blocks in this column. | |
| Contractor's Name: | |
| SAM Unique Entity Identifier (UEI): |
| Trade Agreements: Are the end products U.S.-made or designated country end products? What country? |
| Manufacturer Name, Model/Part Number, etc of the Product: |
| Requirements for PTZ Camera Assembly | |
| The Pan Tilt Zoom (PTZ) Camera Assembly shall meet all of the following Threshold (minimum) requirements/specifications. In addition, there are requirements identified as “Objective.” An “Objective” is a preferred system capability, not a threshold/minimum requirement. | Specify below if your proposed solution meets or does not meet each requirement/specification in the left hand column. Please provide additional information if your proposed solution does not meet a specific requirement. You may provide datasheets to supplement this form. |
| a. End User functions: | |
| 1) The FDVS Cameras (fixed and PTZ) provide air capable USCG cutters with a Day (Color) and No Light (Thermal) imaging capability to enhance the ability to conduct helicopter operations (e.g. landing, take off, & refueling) on the flight deck in normal lighting and during no light operations. | |
| 2) The PTZ Camera Assembly (consisting of both Day (color) and No Light (thermal) zoom lens and camera mounted in a pan tilt enclosure) will have a controller located within the Pilot House for tracking helicopters during operations on the flight deck. | |
| 3) The PTZ Camera Assembly shall interface with the existing PTZ Controller. | |
| 4) The PTZ Camera Assembly shall provide the ability to display a minimal of 18 characters in an alphanumeric character for date/time stamp purposes. The character display can be setup to either the upper or lower sides of a screen in the position of a character. | |
| b. Physical/Environmental: | |
| 1) The PTZ Camera Assembly will be installed on the hangar or overhead structure forward of the flight deck, 15-25 feet above deck, so it provides a clear unobstructed view (through the use of PTZ capabilities) of the entire flight deck aft of the forward peripheral line, as well as the helicopter approach path from ¼ mile aft of the ship, and the helicopter departure zone directly abeam and on either side of the forward peripheral line. (Note: The FDVS Fixed Camera is installed near the hanger door (port or starboard side) 8-10 feet above the deck.) | |
| 2) The PTZ Camera Assembly and encoder (if required) shall meet or exceed NEMA IP66 rating. | |
| c. Interface: | |
| 1) PTZ Camera Control Unit |
(a) Interface RS-232 or RS-422 or RJ-45 Connector for Ethernet 10/100Base-T
(b) Commands Pan, Tilt, Zoom, and Focus (a)
(b)
2) Video Output:
Threshold: Analog or IP. If only IP video output is available, the contractor shall provide an encoder (either external or internal to the PTZ Camera Assembly) to convert the video to analog.
Objective: Analog Threshold:
Objective:
| d. Specifications: |
| 1) The PTZ Camera Assembly shall meet the following standards: |
(a) Rotation: 360° continuous
(b) Pan speed:
Threshold: 1° to 10°/sec Objective: 0.3° to 10°/sec
(c) Tilt range: –70° to +70° non-continuous
(d) Tilt speed:
Threshold: 1° to 60°/sec Objective: 0.3° to 60°/sec
(a)
(b) Threshold:
(b) Objective:
(c)
(d) Threshold:
(d) Objective:
| 2) The required operating temperature range is –32 °F to +131 °F. |
| 3) The No Light Camera shall meet the following minimal standards: |
(a) Frame Rate: 30 Hz
(b) Resolution: 640x480
(c) Spectral response:
Threshold: Long Wave Infrared LWIR Spectrum (approximately 6-14 µm range) Objective: Long Wave Infrared (LWIR 8.0 – 14.0 μm)
(d) Thermal sensitivity:<50 mK
(e) Horizontal Field of View:
Threshold: 40˚Horizontal Objective: 45˚Horizontal
(f) Vertical Field of View: 37˚ Vertical
(g) Zoom:
Threshold: 2X Objective: 3X or higher (a)
(b)
(c) Threhold:
(c) Objective:
(d)
(e) Threshold:
(e) Objective:
(f)
(g) Threshold:
(g) Objective:
4) The Daylight Camera shall meet the following minimal standards:
(a) Frame Rate: 30 Hz
(b) Resolution: 640x480
(c) Zoom: 36X
(d) Horizontal Field of View:
Threshold: 50˚ to 5˚ Objective: 57˚ to 2˚
(e) Minimum Illumination: 17.1 lux (a)
(b)
(c)
(d) Threshold:
(d) Objective:
(e):
The contractor shall provide a standard commercial warranty for a minimum of 12 months after delivery of equipment to the USCG. Product warranties shall include a product return policy. Any Original Equipment Manufacturer (OEM) warranties associated with products delivered under this contract/order shall be available directly to the USCG.
File details come from the government source that posted it. Updated .