Attachment_5_-_Limitation_on_Subcontracting_Worksheet.docx
DOCX document 19 KB Posted
- Attached to
- Remove and install gas-fired water boilers at YELL Federal contract opportunity
- Solicitation number
- 140P1423R0021
About this file
This document is a worksheet for calculating subcontracting percentages under a federal contract. The prime contractor and subcontractor are to provide direct labor costs, fringe benefits, and general and administrative overhead rates to calculate total labor costs for each entity. Using these figures, the worksheet contains a formula for determining the subcontracting labor cost percentage to ensure it meets the limitations on subcontracting requirements under FAR Clause 52.219-14.
The related federal contract opportunity is solicitation number 140P1423R0021 from the Department of the Interior National Park Service Intermountain Region to remove and install gas-fired water boilers at a Yellowstone National Park location.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P1423R0021_Amd_0002.pdf | ||
| Sol_140P1423R0021_Amd_0001.pdf | ||
| Attachment_2_-_Photo_Boiler_2_HRC.jpg | JPG image | |
| Attachment_1_-_Statement_of_Work.docx | DOCX document | |
| Attachment_4_-_Past_Performance_Questionnaire.doc | DOC document | |
| Sol_140P1423R0021.pdf | ||
| Attachment_3_-_Wage_Determination.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 7
U. S. DEPARTMENT OF THE INTERIOR
FAR CLAUSE 52.219-14—LIMITATIONS OF SUBCONTRACTING
SUBCONTRACTING PERCENTAGE WORKSHEET
PRIME CONTRACTOR:
SOURCE:
SUBCONTRACTOR:
SOURCE:
PRIME CONTRACTOR
SUBCONTRACTOR
DIRECT LABOR
FRINGE BENEFITS*
| SUBTOTAL |
| (A) |
| $ |
| (B) |
| $ |
LABOR G&A** @_____%
| TOTAL LABOR COSTS |
| (C) |
| $ |
| (D) |
| $ |
To calculate the subcontracting percentage, first add DIRECT LABOR and FRINGE BENEFITS and enter the figures for the prime contractor in space (A) and for the subcontractor (if available)*** in space (B). Next, calculate the LABOR G&A by multiplying the G&A rate by the SUBTOTAL figure in space (A). Calculate the subcontractor's LABOR G&A by multiplying the subcontractor's G&A rate by the subcontractor's SUBTOTAL figure in (B). Add the LABOR G&A to the SUBTOTAL and record that figure in the spaces for TOTAL LABOR COSTS at (C) and (D), respectively.
Next, using the formula below, calculate the subcontracting labor percentage.
(D) ÷ [(C) + (D)]
| SUBCONTRACTING LABOR COST PERCENTAGE = |
| % |
*The firm must demonstrate that their labor overhead is allowable in accordance with FAR 31.2056(m). Failure to do so will cause the entire overhead to be eliminated from the calculations.
**G&A denotes General and Administrative Costs
*** You need to compare as like figures as possible. Therefore, if you have a breakdown of the subcontractor's costs use it in the formulation above. If you do not have a breakdown you need to use the TOTAL SUBCONTRACTING AMOUNT for item (D) even though you must still breakdown the contractor's costs.
File details come from the government source that posted it. Updated .