Attachment_4_SPI.pdf
PDF 871 KB Posted
- Attached to
- FA8250-26-R-0532: Repair of NSN 5840-01-483-0555
- Solicitation number
- FA825026R0532
About this file
This is a Special Packaging Instruction (SPI) document issued by the 406 Supply Chain Management Squadron at Hill Air Force Base for the packaging and shipment of a Radar Set Subassembly (part number 1366839, National Stock Number 5840-01-483-0555). The document specifies military preservation and packing requirements in accordance with MIL-STD-2073-1, with separate Level A and Level B protection specifications depending on severity of intended shipment conditions. Level A protection is designated for war reserve material, mobilization, strategic and theater deployment, and open storage scenarios, with dimensions of 33 1/4" x 23 1/2" x 31 3/4". Level B protection applies to standard conditions, with dimensions of 32 1/2" x 22 1/2" x 30 3/4". The item requires serviceable preservation method 42 and unserviceable preservation method 42, with cleaning and drying per MIL-STD-2073-1.
The packaging instructions detail seventeen material components including tape, blocks, nuts, washers, bolts, pads, sleeves, separators, anchors, bases, interior containers, bags, and cushioning elements, each with specified dimensions and material specifications. All wooden lumber, pallets, and containers must be constructed from debarked, heat-treated wood (56 degrees Celsius or 133 degrees Fahrenheit for 30 minutes) with certification from an accredited agency recognized by the American Lumber Standards Committee in compliance with International Standards for Phytosanitary Measures (ISPM No. 15). The document includes detailed assembly instructions, technical drawings with dimensions and cross-sections, and notes on proper attachment of padding and sleeves using specified adhesives and tapes. The instruction was last updated in revision D on 25108 with dimensional and form updates.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_3_Packaging_Requirements.pdf | ||
| Attachment_7_IUID.pdf | ||
| Attachment_8_RQR.pdf | ||
| Attachment_2_Item_Description.pdf | ||
| Attachment_5_PWS.docx | DOCX document | |
| Attachment_9_CDRLs.pdf | ||
| Attachment_1_CAVAF.docx | DOCX document | |
| Attachment_6_RDL.pdf | ||
| FA8250-26-R-0532.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
NOTES
1. ATTACH REF.-14 & REF.-15 TO REF.-10 USING ADHESIVE CONFORMING TO A-A-1936 TYPE II OR EQUAL.
2. PLACE SLEEVE, REF.-9, AROUND ITEM AND SECURE WITH TAPE, REF.-16. PLACE PAD, REF.-10, ON TOP OF ITEM.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 5: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
File details come from the government source that posted it. Updated .