Attachment_4_-_SPECIFICATIONS.pdf
PDF 143 KB Posted
- Attached to
- IFB 2PA5K02939 NEU Hook Style Water Tank System
- Solicitation number
- 0000039352
- Issued by
- Placer County, Anaheim City, California
About this file
This is a specifications document from the California Department of Forestry and Fire Protection (CAL FIRE) detailing requirements for a hooklift skid-mounted water tank system. The specification calls for a 3,000-gallon water tank system with a 22 gallons per minute capacity, compatible with a 16-foot Stellar brand hook lift skid. The tank must be constructed of 3/16-inch carbon metal with dimensions of approximately 192 inches in length, 96 inches in width, and 86.5 inches in height. The system includes a 4-inch by 4-inch self-priming pump rated at 650 gallons per minute with total dynamic head capability at 2,400 RPM, powered by a diesel engine rated at 49 horsepower (Tier 4 or newer, CARB compliant) with an 8-gallon minimum fuel tank. The platform measures 36 inches by 96 inches with the engine and pump mounted on the front deck.
The system must include an in-cab control system for engine and spray bar functions, with quick disconnect connections and remote start capability when the skid is disconnected from the truck. Additional specifications include a spray bar with two adjustable sprayers, a hydrant fill system with a 3-inch pipe and 2.5-inch ball valve, a 1-1/2-inch by 50-foot spring rewind hose reel, storage tubes for self-loading hose (minimum 10.5 feet long on each side), water discharge valves at multiple locations (rear 2.5-inch, 1.5-inch, and 1-inch, and 2.5-inch valves on left and right sides), a water level sight gauge, a ladder for dome access, a 10-inch manual telescoping gravity water dump at the rear, three zinc anodes, and a 2.5-inch hose roll holder with 25-foot capacity. The entire system is to be painted international red, with the supplier responsible for installing cab controls in the CAL FIRE truck next to the Stellar lift controls.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_3_-_NARRATIVE_RESPONSE.docx | DOCX document | |
| CAL_FIRE_Agreement_Letter.pdf | ||
| Std204.pdf | ||
| Attachment_2_-_COST_WORKSHEET.xlsx | XLSX spreadsheet | |
| Cal_Recycle_Form.pdf | ||
| Attachment_1_-_ADMIN_REQUIREMENTS.pdf | ||
| IFB_2PA5K02939_Hook_Truck_Water_Tank_Q_A.pdf | ||
| CALIFORNIA_CIVIL_RIGHTS_LAWS_ATTACHMENT.pdf | ||
| Bidder_Declaration_Form.pdf | ||
| std205.pdf | ||
| calfire720.docx | DOCX document | |
| Invitation_to_Bid_-_2PA5K02939.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF CALIFORNIA NATURAL RESOURCES AGENCY Gavin Newsom, Governor
DEPARTMENT OF FORESTRY AND FIRE PROTECTION
P.O. Box 944246
SACRAMENTO, CA 94244-2460
(916) 653-7772 Website: www.fire.ca.gov
Attachment 4: Specifications
Hook Style Water Tank System Specifications
Hooklift skid mounted 3000 gallon water tank 22 gpi with baffles, fenders, dome fill, and spray system.
• Compatible with 16’ Steller brand hook lift skid with rear rollers
• Rollers for subframe, compatible with Stellar brand hook lift
• Hold down safety kit for water tank skid, compatible with Stellar brand hood lift
• Tank must be built out of 3/16” carbon metal
• Overall length approximately 192”
• Platform width approximately 96”
• Overall, height approximately 86.5”
• Tank length approximately 131”
• Pump: 4”x4” self priming 650 gpm tdh with engine at 2400rpm
• Suction 4” and discharge 3” plumbing
• Drain valves on pump and at the lowest point of plumbing
• Self-loading plumbing for drafting.
• Engine: diesel engine 49 hp tier 4 or newer (carb compliant)
• Diesel tank size 8 gallons minimum
• Engine and pump cover
• Engine mounting location, front deck of platform. Platform size 36” X 96
• In cab control for engine and spray bar functions
• Spray bar. 2 sprayers. One each side of rear spray bar. Sprayers are to be adjustable for width of pattern.
• Remote start on skid for engine and pumping when skid is disconnected from truck.
• Quick disconnect connections from cab controls to skid
• Supplier to install cab controls in CAL FIRE truck next to Stellar lift controls inside cab between drivers and passenger seat
• Hydrant fill rear of bed 3” piping to fill dome with air gap to water level. With 2.5” ball valve. Reachable by hand when skid is on truck
• 2.5” hose roll holder near hydrant fill. Capacity 25’ roll of 2.5” hose.
• Ladder rear of skid to fill dome near hydrant fill
• Water level sight gauge rear of skid.
http://www.fire.ca.gov/
• Rear 2.5”,1.5“, and 1” ball valve water discharge. Placed at a height that is reachable to turn on and off when skid is on truck.
• Left side near the front of skid 2.5” ball valve water discharge
• Right side near the front of skid 2.5” ball valve water discharge
• Storge tubes for self-loading hose. Minium of 10.5’ long. 1 tube each side of skid built into fenders.
• Three (3) anodes made of zinc, appropriately sized for the tank.
• 1 spring rewind hose reel with 1-1/2” x 50’ hose right side of skid
• Rear of skid manual 10” telescoping gravity water dump.
• Painted International red
File details come from the government source that posted it. Updated .