Attachment 4 - Salient Characteristics.pdf
PDF 105 KB Posted
- Attached to
- 26K Modular Aircraft Shoring Ramp Federal contract opportunity
- Solicitation number
- FA441925Q0030
About this file
This document is a Salient Characteristics specification for the 26K HelMAS/DAMAS Modular Aircraft Shoring Ramp system. The specification details precise technical requirements for a military aircraft loading system compatible with helicopters like CH-47s, LUH-72s, and MH-6s, and fixed-wing aircraft including C-130, C17, and C5. Key specifications include a 26,000 lbs maximum single axle rating for primary ramp components, a pooched plate surface with specific friction coefficients, and strict requirements for component construction, including certification by ATTLA and compliance with international agricultural standards.
The document outlines three specific kit configurations: a 3-Leg 26K HeIMAS w/CRA Shoring Kit, a 3-Leg 26K HeIMAS UNDER kit, and a 26K DAMAS Miscellaneous Stands Set. Each kit includes detailed quantities of specialized ramp sections, ramp pads, adjustable stands, and a side-loading container. The system is designed with a 2:1 safety factor, requiring all components to be fabricated by AWS-certified welders and meeting stringent load-bearing and surface interaction specifications for military aircraft loading operations.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined_Synopsis_Solicitation 26K Modular Shoring Ramp.pdf | ||
| Attachment 2 - Instructions to Offerers.pdf | ||
| Attachment 1 - Clauses and Provisions.pdf | ||
| Attachment 3 - Evaluation Factors.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
26K HelMAS/DAMAS Salient Characteristics
Brand Name or Equal. It shall have the following salient characteristics:
1. The 26K HelMAS system shall be capable of loading any helicopter that requires approach shoring, but does NOT require the TLG assembly, to include CH-47s, LUH-72s, and MH-6s. It shall also be capable of loading equipment with small caster wheels.
2. The system shall be compatible with C-130, C17 & C5 aircraft.
3. When under a full load, no pressures on aircraft cargo floor or cargo ramp will exceed 50 psi.
4. Each left/right ramp component assemblies shall be rated at 26,000 lbs. maximum single axle, 36" wide, no thicker than 4”, two carry handles on each side.
5. The optional center ramp assemblies, when required for a Tail Landing Gear (TLG) or Nose
Landing Gear (NLG) shall be rated at 13,000 lbs. maximum single axle (6,500 lbs. per single tire), 24” wide, no thicker than 4”, two carry handles on each side. *
6. HelMAS assembly will have pooched plate surface, providing the minimum friction coefficient of: Dry: 80 and Wet: 63 Per Pendulum Test Value (PTV) with Four S (96) hard rubber slider
7. HelMAS assembly will have a minimum total length of 244 inches.
8. All components that come in contact with the aircraft cargo floor or cargo door have smooth belting bonded securely to the base (e.g. Ramp Pads, and Stands).
9. All components must be certified by ATTLA # 2012.02.06.02 Rev 1.
10. All components must NOT subject to DoD Manual 4140.65-M, and are to be compliant with the International Standards for Phytosanitary Measures (ISPM), United States Department of Agriculture (USDA), Animal Plant Health Inspection Service (APHIS) Plant Protection and Quarantine (PPQ) program, and the International Plant Protection Convention (IPPC).
11. Rated capacity shall be no more than 50% of breaking strength (2 to 1 safety factor)
12. Each HelMAS, and sub-component, will be fabricated by a welder certified by the American
Welding Society (AWS).
Required part numbers(or equal):
Item 1: 3-Leg 26K HeIMAS w/CRA Shoring Kit
Part Number RAAF-26K-H-338-CRA-K
THIS KIT MUST INCLUDE:
Qty 6 - Q6946, 36" X 94" 26K Pooched Ramp Section Qty 4 - Q5467, 8" X 40" X 4"H Ramp Pad Qty 2 - Q6030, Stand Adjustable 13" - 15" Qty 2 - Q5756, Stand Adjustable 20" - 24" Qty 4 - Q6947, 36" X 28" X 26K Pooched Wedge Qty 3 - Q6971, 24" X 94" 13K Pooched Ramp Section Qty 2 - Q6708, 8" X 24" X 4"H Ramp Pad 13K Qty 1 - Q8488, Stand Adjustable 13" - 15", 24"Wide Qty 1 - Q9191, Stand Adjustable 20" - 24", 24"Wide Qty 2 - Q6915, 24" X 28" X 13K Pooched Wedge Qty 1 - Q9506, 3K 96x42x53 Side-Loading/Top-Open Container
Item 2: 3-Leg 26K HeIMAS UNDER kit
Part Number RAAF-26K-H-336-U-K
THIS KIT MUST INCLUDE
Qty 4 - Q6946, 36" X 94" 26K Pooched Ramp Section
Qty 2 - Q9585, 36" X 94" 26K Flat Top Pooched Ramp Section Qty 2 - Q9778, 36" X 54" 26K Pooched Lead Up Qty 2 - Q5467, 8" X 40" X 4"H Ramp Pad Qty 2 - Q6030, Stand Adjustable 13" - 15" Qty 2 - Q5756, Stand Adjustable 20" - 24" Qty 2 - Q6748, Stand Adjustable Height 26"-30" Qty 1 - Q9506, 3K 96x42x53, Side Access Loading Container
Item 3: 26K DAMAS Miscellaneous Stands Set
Part Number 26K-D-MISC-STANDS
THIS SET MUST INCLUDE
Qty 2 - Q6749, Stand Adjustable Height 34"-38" Qty 4 - Q6750, Stand Adjustable Height 40"-44"
26K HelMAS/DAMAS Salient Characteristics
File details come from the government source that posted it. Updated .