Attachment 4 - Provisions and Clauses - Cisco ISE.pdf

FA485524Q0041 (Not Set)

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO CLAUSE TITLE YEAR-

MO SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. 2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials. 2022-09 SEC K

252.204-7004 Antiterrorism Awareness Training for Contractors. 2023-01 SEC I

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support.

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

252.204-7018 Prohibition on the Acquisition of Covered Defense

Maduro Regime.

Regime.

Uyghur Autonomous Region-Representation.

Uyghur Autonomous Region.

52.204-21 Basic Safeguarding of Covered Contractor Information Systems.

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

SOLICITATION NUMBER DOCUMENT NUMBER

Telecommunications Equipment or Services.

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC I 252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I 252.225-7000 Buy American--Balance of Payments Program Certificate. 2024-02 SEC K 252.225-7001 Buy American and Balance of Payments Program. 2024-02 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I

2016-10 SEC K

2023-01 SEC I

2023-01 SEC I

2021-05 SEC K

252.225-7055 Representation Regarding Business Operations with the 2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro 2023-01 SEC I

252.225-7059 Prohibition on Certain Procurements from the Xinjiang 2023-06 SEC K

252.225-7060 Prohibition on Certain Procurements from the Xinjiang 2023-06 SEC I

252 232-7003 Electronic Submission of Payment Requests and Receiving 2018-12 SEC G Reports.

252.232-7010 Levies on Contract Payments. 2006-12 SEC I

252 237-7010 Prohibition on Interrogation of Detainees by Contractor 2023-01 SEC I Personnel.

252.239-7017 Notice of Supply Chain Risk. 2022-12 SEC L 252.239-7018 Supply Chain Risk. 2022-12 SEC I

252 244-7000 Subcontracts for Commercial Products or Commercial 2023-11 SEC I Services.

252.247-7023 Transportation of Supplies by Sea. 2023-01 SEC I

52.201-1 Acquisition 360: Voluntary Survey. 2023-09 SEC L 52.204-13 System for Award Management Maintenance. 2018-10 SEC I 52.204-16 Commercial and Government Entity Code Reporting. 2020-08 SEC L 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08 SEC I

2021-11 SEC I

2021-11 SEC K

52.204-29 Federal Acquisition Supply Chain Security Act Orders- 2023-12 SEC K

52.204-7

Representation and Disclosures.

System for Award Management.

2018-10

SEC L

Services.

Commercial Services.

and Video Surveillance Services or Equipment.

52.203-11 Certification and Disclosure Regarding Payments to Influence

Certain Federal Transactions.

52.203-12 Limitation on Payments to Influence Certain Federal Transactions.

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

252.204-7000

Agreements or Statements.

Disclosure of Information.

2016-10

SEC I

52.204-9 Personal Identity Verification of Contractor Personnel. 2011-01 SEC I

52 204-10 Reporting Executive Compensation and First-Tier Subcontract 2020-06 SEC I Awards.

52.204-14 Service Contract Reporting Requirements. 2016-10 SEC I 52.204-15 Service Contract Reporting Requirements for Indefinite- 2016-10 SEC I

Delivery Contracts.

52.204-17 Ownership or Control of Offeror. 2020-08 SEC K 52.204-20 Predecessor of Offeror. 2020-08 SEC K

Protecting the Government's Interest When Subcontracting 52.209-6 with Contractors Debarred, Suspended, or Proposed for 2021-11 SEC I

Debarment.

Contract Terms and Conditions Required To Implement

52.212-5 ALT I Statutes or Executive Orders-Commercial Products and 2000-02 SEC I Commercial Services. (Alternate I)

52.222-1 Notice to the Government of Labor Disputes. 1997-02 SEC I

52.212-1 Instructions to Offerors-Commercial Products and Commercial 2023-09 SEC L

52.212-4 Contract Terms and Conditions-Commercial Products and 2023-11 SEC I

52 223-22 Public Disclosure of Greenhouse Gas Emissions and 2016-12 SEC K Reduction Goals-Representation.

52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 SEC I

Prohibition on Contracting for Hardware, Software, and 52.204-23 Services Developed or Provided by Kaspersky Lab Covered 2023-12 SEC I

Entities.

2007-09 SEC K

2020-06 SEC I

2017-01 SEC I

52.204-25 Prohibition on Contracting for Certain Telecommunications 2021-11 SEC I

52 204-26 Covered Telecommunications Equipment or Services- 2020-10 SEC K Representation.

52.204-27 Prohibition on a ByteDance Covered Application. 2023-06 SEC I

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. 2015-11 SEC I

52.222-50 Combating Trafficking in Persons. 2021-11 SEC I 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2023-03 SEC I

52.233-4 Applicable Law for Breach of Contract Claim. 2004-10 SEC I 252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I

252 204-7016 Covered Defense Telecommunications Equipment or Services- 2019-12 SEC K Representation.

252.239-7009 Representation of Use of Cloud Computing. 2015-09 SEC K 252.239-7010 Cloud Computing Services. 2023-01 SEC I

252 246-7004 Safety of Facilities, Infrastructure, and Equipment for Military 2010-10 SEC I Operations.

252.246-7008 Sources of Electronic Parts. 2023-01 SEC I

52.219-6 Notice of Total Small Business Set-Aside. 2020-11 SEC I

52 232-29 Terms for Financing of Purchases of Commercial Products and 2021-11 SEC I Commercial Services.

52.232-31 Invitation to Propose Financing Terms. 2022-12 SEC L 52.233-3 Protest after Award. 1996-08 SEC I

52.222-3 Convict Labor. 2003-06 SEC I

52 222-4 Contract Work Hours and Safety Standards -Overtime 2018-05 SEC I Compensation.

52.222-21 Prohibition of Segregated Facilities. 2015-04 SEC I 52.222-35 Equal Opportunity for Veterans. 2020-06 SEC I 52.222-36 Equal Opportunity for Workers with Disabilities. 2020-06 SEC I 52.222-37 Employment Reports on Veterans. 2020-06 SEC I 52.222-41 Service Contract Labor Standards. 2018-08 SEC I

Fair Labor Standards Act and Service Contract Labor 52.222-43 Standards-Price Adjustment (Multiple Year and Option 2018-08 SEC I

Contracts).

52.222-44 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment. 2014-05 SEC I

52.222-54 Employment Eligibility Verification. 2022-05 SEC I

52.222-55 Minimum Wages for Contractor Workers Under Executive Order 14026.

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors.

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement.

CLAUSES IN FULL TEXT

CLAUSE

NO

ALT NO/

DEV NO CLAUSE TITLE YEAR-

MO

CLAUSE TEXT

252.239-7002 Access. 1991-12

As prescribed in 239.7411(a), use the following clause:

ACCESS (DEC 1991)

(a) Subject to military security regulations, the Government shall permit the Contractor access at all reasonable times to Contractor furnished facilities. However, if the Government is unable to permit access, the Government at its own risk and expense shall maintain these facilities and the Contractor shall not be responsible for the service involving any of these facilities during the period of nonaccess, unless the service failure results from the Contractor's fault or negligence.

(b) During periods when the Government does not permit Contractor access, the Government will reimburse the Contractor at mutually acceptable rates for the loss of or damage to the equipment due to the fault or negligence of the Government. Failure to agree shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

(End of clause)

252.239-7004 Orders for Facilities and Services. 2019-09

ORDERS FOR FACILITIES AND SERVICES (SEP 2019)

2022-01 SEC I

2023-01 SEC I

(a) Definitions. As used in this clause-

"Governmental regulatory body" means the Federal Communications Commission, any statewide regulatory body, or any body with less than statewide jurisdiction when operating under the state authority. Regulatory bodies whose decisions are not subject to judicial appeal and regulatory bodies which regulate a company owned by the same entity that creates the regulatory body are not governmental regulatory bodies.

(b) The Contractor shall acknowledge a communication service authorization or other type order for supplies and facilities by-

(1) Commencing performance after receipt of an order; or

(2) Written acceptance by a duly authorized representative.

(c) The Contractor shall furnish the services and facilities under this agreement/contract in accordance with all applicable tariffs, rates, charges, regulations, requirements, terms, and conditions of-

(1) Service and facilities furnished or offered by the Contractor to the general public or the Contractor's subscribers; or

(2) Service as lawfully established by a governmental regulatory body.

(d) The Government will not prepay for services.

(e) For nontariffed services, the Contractor shall charge the Government at the lowest rate and under the most favorable terms and conditions for similar service and facilities offered to any other customer.

(f) Recurring charges for services and facilities shall, in each case, start with the satisfactory beginning of service or provision of facilities or equipment and are payable monthly in arrears.

(g) Expediting charges are costs necessary to get services earlier than normal. Examples are overtime pay or special shipment. When authorized, expediting charges shall be the additional costs incurred by the Contractor and the subcontractor. The Government shall pay expediting charges only when-

(1) They are provided for in the tariff established by a governmental regulatory body; or

(2) They are authorized in a communication service authorization or other contractual document.

(h) When services normally provided are technically unacceptable and the development, fabrication, or manufacture of special equipment is required, the Government may-

(1) Provide the equipment; or

(2) Direct the Contractor to acquire the equipment or facilities. If the Contractor acquires the equipment or facilities, the acquisition shall be competitive, if practicable.

(i) If at any time the Government defers or changes its orders for any of the services but does not cancel or terminate them, the amount paid or payable to the Contractor for the services deferred or modified shall be equitably adjusted under applicable tariffs filed by the Contractor with the regulatory commission in effect at the time of deferral or change. If no tariffs are in effect, the Government and the Contractor shall equitably adjust the rates by mutual agreement. Failure to agree on any adjustment shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

252.239-7007 Cancellation or Termination of Orders. 2019-09

CANCELLATION OR TERMINATION OF ORDERS (SEP 2019)

(a) Definitions.

"Actual nonrecoverable costs" means the installed costs of the facilities and equipment, less cost of reusable materials, and less net salvage value.

"Basic cancellation liability" means the actual nonrecoverable cost, which the Government shall reimburse the Contractor at the time services are cancelled.

"Basic termination liability" means the nonrecoverable cost amortized in equal monthly increments throughout the liability period.

"Installed costs" means the actual cost of equipment and materials specifically provided or used, plus the actual cost of installing (including engineering, labor, supervision, transportation, rights-of-way, and any other items which are chargeable to the capital accounts of the Contractor), less any costs the government may have directly reimbursed the Contractor under the Special Construction and Equipment Charges clause of this agreement/contract.

"Net salvage value" means the salvage value less the cost of removal.

(b) If the Government cancels any of the services ordered under this agreement/contract, before the services are made available to the Government, or terminates any of these services after they are made available to the Government, the Government will reimburse the Contractor for the actual nonrecoverable costs the Contractor has reasonably incurred in providing facilities and equipment for which the Contractor has no foreseeable reuse. The Government will not reimburse the Contractor for any actual nonrecoverable costs incurred after notice of award, but prior to execution of the order.

(c) When feasible, the Contractor shall reuse cancelled or terminated facilities or equipment to minimize the charges to the Government.

(d) If at any time the Government requires that telecommunications facilities or equipment be relocated within the Contractor's service area, the Government will have the option of paying the costs of relocating the facilities or equipment in lieu of paying any termination or cancellation charge under this clause. The basic cancellation liability or basic termination liability applicable to the facilities or equipment in their former location shall continue to apply to the facilities and equipment in their new location. Monthly recurring charges shall continue to be paid during the period.

(e) When there is another requirement or foreseeable reuse in place of cancelled or terminated facilities or equipment, no charge shall apply and the basic cancellation liability or basic termination liability shall be appropriately reduced. When feasible, the Contractor shall promptly reuse discontinued channels or facilities, including equipment for which the Government is obligated to pay a minimum service charge.

(f) The amount of the Government's liability upon cancellation or termination of any of the services ordered under this agreement/contract will be determined under applicable tariffs governing cancellation and termination charges which-

(1) Are filed by the Contractor with a governmental regulatory body, as defined in the Rates, Charges, and Services clause of this agreement/contract;

(2) Are in effect on the date of termination; and

(3) Provide specific cancellation or termination charges for the facilities and equipment involved or show how to determine the charges.

(g) The amount of the Government's liability upon cancellation or termination of any of the services ordered under this agreement/contract, which are not subject to a governmental regulatory body, will be determined under a mutually agreed schedule in the communication services authorization (CSA) or other contractual document.

(h) If no applicable tariffs are in effect on the date of cancellation or termination or set forth in the applicable CSA or other contractual document, the Government's liability will be determined under the following settlement procedures-

(1) The Contractor agrees to provide the Contracting Officer, in such reasonable detail as the Contracting Officer may require, inventory schedules covering all items of property or facilities in the Contractor's possession, the cost of which is included in the Basic Cancellation or Termination Liability for which the Contractor has no foreseeable reuse.

(2) The Contractor shall use its best efforts to sell property or facilities when the Contractor has no foreseeable reuse or when the Government has not exercised its option to take title under the Title to Telecommunications Facilities and Equipment clause of this agreement/contract. The Contractor shall apply any proceeds of the sale to reduce any payments by the Government to the Contractor under a cancellation or termination settlement.

(3) The Contractor shall record actual nonrecoverable costs under established accounting procedures prescribed by the cognizant governmental regulatory authority or, if no such procedures have been prescribed, under generally accepted accounting procedures applicable to the provision of telecommunication services for public use.

(4) The net salvage value shall be deducted from the Contractor's installed cost. In determining net salvage value, the Contractor shall consider the foreseeable reuse of the facilities and equipment by the Contractor. The Contractor shall make allowance for the cost of dismantling, removal, reconditioning, and disposal of the facilities and equipment when necessary either for the sale of facilities or their reuse by the Contractor in another location.

(5) Upon termination of services, the Government will reimburse the Contractor for the nonrecoverable cost less such costs amortized to the date services are terminated and establish the liability period as mutually agreed to but not to exceed ten years. In the case of either a cancellation or a termination, the Government's presumed maximum liability will be capped by the unpaid non-recurring charges and the monthly recurring charges set out in the contract/agreement. The presumed maximum liability for monthly recurring charges shall be capped at monthly recurring charges for the minimum service period and any required notice period.

(6) When the basic cancellation liability or basic termination liability established by the CSA or other contractual document is based on estimated costs, the Contractor agrees to settle on the basis of actual cost at the time of cancellation or termination.

(7) The Contractor agrees that, if after settlement but within the termination liability period of the services, should the Contractor make reuse of equipment or facilities which were treated as nonreusable or nonsalvable in the settlement, the Contractor shall reimburse the Government for the value of the equipment or facilities.

(8) The Contractor agrees to exclude-

(i) Any costs which are not included in determining cancellation and termination charges under the Contractor's standard practices or procedures; and

(ii) Charges not ordinarily made by the Contractor for similar facilities or equipment, furnished under similar circumstances.

(i) The Government may, under such terms and conditions as it may prescribe, make partial payments and payments on account against costs incurred by the Contractor in connection with the cancelled or terminated portion of this agreement/contract. The Government may make these payments if the Contracting Officer determines that the total of the payments is within the amount the Contractor is entitled. If the total of the payments is in excess of the amount finally agreed or determined to be due under this clause, the Contractor shall pay the excess to the Government upon demand.

(j) Failure to agree shall be a dispute concerning a question of fact within the meaning of the Disputes clause.

252.211-7003 Item Unique Identification and Valuation. 2023-01

As prescribed in 211.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

http://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html http://www.aimglobal.org/?Reg_Authority15459

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

http://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International

Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard

15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International

Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Identification Number); and

Use a DoD recognized unique identification equivalent (e.g. Vehicle

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

http://dodprocurementtoolbox.com/site http://dodprocurementtoolbox.com/site/uidregistry/%3B

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

N/A

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A http://www.sam.gov/

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.237-7023 Continuation of Essential Contractor Services. 2010-10

As prescribed in 237.7603(a), use the following clause:

CONTINUATION OF ESSENTIAL CONTRACTOR SERVICES (OCT 2010)

(a) Definitions. As used in this clause-

(1) "Essential contractor service" means a service provided by a firm or individual under contract to DoD to support mission-essential functions, such as support of vital systems, including ships owned, leased, or operated in support of military missions or roles at sea; associated support activities, including installation, garrison, and base support services; and similar services provided to foreign military sales customers under the Security Assistance Program. Services are essential if the effectiveness of defense systems or operations has the potential to be seriously impaired by the interruption of these services, as determined by the appropriate functional commander or civilian equivalent.

(2) "Mission-essential functions" means those organizational activities that must be performed under all circumstances to achieve DoD component missions or responsibilities, as determined by the appropriate functional commander or civilian equivalent. Failure to perform or sustain these functions would significantly affect DoD's ability to provide vital services or exercise authority, direction, and control.

(b) The Government has identified all or a portion of the contractor services performed under this contract as essential contractor services in support of mission essential functions. These services are listed in attachment , Mission-Essential Contractor Services, dated .

(c)(1) The Mission-Essential Contractor Services Plan submitted by the Contractor, is incorporated in this contract.

(2) The Contractor shall maintain and update its plan as necessary. The Contractor shall provide all plan updates to the Contracting Officer for approval.

(3) As directed by the Contracting Officer, the Contractor shall participate in training events, exercises, and drills associated with Government efforts to test the effectiveness of continuity of operations procedures and practices.

(d)(1) Notwithstanding any other clause of this contract, the contractor shall be responsible to perform those services identified as essential contractor services during crisis situations (as directed by the Contracting Officer), in accordance with its Mission-Essential Contractor Services Plan.

(2) In the event the Contractor anticipates not being able to perform any of the essential contractor services identified in accordance with paragraph (b) of this section during a crisis situation, the Contractor shall notify the Contracting Officer or other designated representative as expeditiously as possible and use its best efforts to cooperate with the Government in the Government's efforts to maintain the continuity of operations.

(e) The Government reserves the right in such crisis situations to use Federal employees, military personnel or contract support from other contractors, or to enter into new contracts for essential contractor services.

(f) Changes. The Contractor shall segregate and separately identify all costs incurred in continuing performance of essential services in a crisis situation. The Contractor shall notify the Contracting Officer of an increase or decrease in costs within ninety days after continued performance has been directed by the Contracting Officer, or within any additional period that the Contracting Officer approves in writing, but not later than the date of final payment under the contract. The Contractor's notice shall include the Contractor's proposal for an equitable adjustment and any data supporting the increase or decrease in the form prescribed by the Contracting Officer. The parties shall negotiate an equitable price adjustment to the contract price, delivery schedule, or both as soon as is practicable after receipt of the Contractor's proposal.

(g) The Contractor shall include the substance of this clause, including this paragraph (g), in subcontracts for the essential services.

252.237-7024 Notice of Continuation of Essential Contractor Services. 2010-10

As prescribed in 237.7603(b), use the following provision:

NOTICE OF CONTINUATION OF ESSENTIAL CONTRACTOR SERVICES (OCT 2010)

(a) Definitions. "Essential contractor service"and "mission-essential functions" have the meanings given in the clause at 252.237-7023, Continuation of Essential Contractor Services, in this solicitation.

(b) The offeror shall provide with its offer a written plan describing how it will continue to perform the essential contractor services listed in attachment , Mission Essential Contractor Services, dated , during periods of crisis. The offeror shall-

(1) Identify provisions made for the acquisition of essential personnel and resources, if necessary, for continuity of operations for up to 30 days or until normal operations can be resumed;

(2) Address in the plan, at a minimum-

(i) Challenges associated with maintaining essential contractor services during an extended event, such as a pandemic that occurs in repeated waves;

(ii) The time lapse associated with the initiation of the acquisition of essential personnel and resources and their actual availability on site;

(iii) The components, processes, and requirements for the identification, training, and preparedness of personnel who are capable of relocating to alternate facilities or performing work from home;

(iv) Any established alert and notification procedures for mobilizing identified "essential contractor service" personnel; and

(v) The approach for communicating expectations to contractor employees regarding their roles and responsibilities during a crisis.

(End of provision)

52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services. 2024-02

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications-Commercial Products and Commercial Services (Feb 2024)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision-

Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"-

Sensitive technology-

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-

(i) To restrict the free flow of unbiased information…