Attachment 4 FMS A-Cables RCN and TN SOW final.pdf

Attachment 4 v1.0_AUGUST2016

STATEMENT OF WORK (SOW)

FMS Canada, Royal Canadian Navy (RCN)

Mk 48 7AT Submarine Upgrade and Turkey, Turkish Navy (TN)

Mk 48 6AT Integration

1.0 Background

This requirement is for the production lot procurement of Umbilical “A”-cables for Royal

Canadian Navy (RCN) for the Mk 48 7AT Torpedo integration into their Victoria Class

Submarines and for the production lot procurement of Umbilical “A”-cables for the Turkish

Navy for their integration of the Mk 48 6AT Torpedo into their New Type Submarine Project

(NTSP). Each of these cables are similar to the USN Mk 62 Mod 1 A-Cables. Both the RCN and

TN A-cables include the Mk 48 (FMS) end connector stiffener and length changes to accommodate the respective Torpedo Tubes. The TN A-Cable will utilize a Breech End

Connector which is identical to an/the earlier US Navy Mk 62 Mod 0 / Mk 6 Mod 0/1 connector(s).

This procurement is being conducted by the Mk 48 Interfaces, In-Service Engineering Agent

(ISEA) from Code 4523 NUWC DIVISION Newport, RI 02841.

2.0 Scope

This requirement is for hardware procurement of Umbilical “A”-cables for Foreign Military

Sales (FMS).

2.1 One hundred nine (109) Umbilical “A”-cables for Royal Canadian Navy Mk 48 7AT

Torpedo integration. The A-Cables shall be fabricated in accordance with the applicable documents and specifications. The Sponsoring Activity funding this is: PMS404. The

Funding is provided by: FMS CASE CN-P-APE and CN-P-MIE.

2.2 This requirement is also for hardware procurement of Fifty-Four (54) of Umbilical “A”-cables for the Turkish Navy for their integration of the Mk 48 6AT Torpedo into their New

Type Submarine Project (NTSP). The Funding is provided by: FMS CASE TK-P-LLJ.

3.0 Applicable Documents

3.1 RCN

Number Title Drawing/Specification #

3.1.1 Cable Assembly Umbilical, Mk 62 RCN #8667431

3.1.2 Plate, Identification #8667432

3.1.3 PIN MOLDED-IN INSERT BREECH

CONNECTOR

#6894535

3.1.4 HOUSING, MACHINED BREECH

CONNECTOR

#6894545

3.1.5 Parts List #PL8667431

3.1.6 Contact Pin No 16 #6894549_53711_FN_01_D_1

3.1.7 Parts List #PL 6894545_53711_A_ALL

3.1.8 TORPEDO MK 48

CRITICAL ITEM FABRICATION

SPECIFICATION

CABLE, UMBILICAL, MK 62 RCN

NAVSEA #6894520 REV D

3.1.9 TORPEDO MK 48 RFC: 48/NUE15124, Rev: - NUWCDIVNPT Engineering Change Proposal

3.2 TN

Number Title Drawing/Specification #

3.2.1 Cable Assembly Umbilical, Turkey #8667269

3.2.2 Plate, Identification #8667270

3.2.3 Pin Molded-In Insert Breech Connector #8667436

3.2.4 Housing, Machined Breech Connector #8667437

3.2.5 Cable Assembly Umbilical, Turkey Parts List #PL 8667269

3.2.6 Contact Pin No 16 #6894549_53711_FN_01_D_1

3.2.7 PIN MOLDED-IN INSERT BREECH

CONNECTOR Parts List

#PL 6894545_53711_A_ALL

3.2.8 Torpedo MK 48

Critical Item Fabrication Specification Cable, Umbilical, MK 62 MOD 1

NAVSEA #6894520 REV D

3.2.9 Torpedo MK 48 RFC: 48/NUE15124, Rev “-“ N/A

4.0 Technical Requirements

Parts shall be fabricated in accordance with the applicable Documents and Specifications shown in Section 3.0

4.1 Deliverables

4.1.1 The offeror shall provide RCN and TN shipboard hardware in accordance with the applicable documents in Section 3.0. The Offeror shall submit all Periodic Production Lot

Test reports as required from 3.1.8 and/or 3.2.8, for the delivered products in accordance with CDRL A001. The offeror shall submit a Certificate of Compliance with each cable to indicate that all the drawing specifications have been adhered to, including that all indicated tests have been passed in accordance with CDRL A002.

4.1.2 A DD-250 Material Inspection and Receiving Report shall also be submitted with the One hundred (109) Mk 62 RCN Umbilical cables and 54 TN A-Cables at completion.

4.1.3 There is no requirement to perform first article tests, as detailed in the

Specifications, if the vendor has successfully produced and delivered A-cables for the USN or our FMS Customers within the last 5 years. If the vendor is new to the production of these cables, or have not successfully produced A-Cables foe the USN and/or our FMS customers within the past 5 years, they shall be required to conduct and Pass all the first article tests as detailed in 3.1.8 and 3.2.8. Preproduction (First Article) Test Plans shall be delivered in accordance with CDRL A003 and the Preproduction (First Article) Test Reports shall be delivered in accordance with CDRL A001.