Attachment 3 - Statement of Work - 70Z03825QH0000088 (1).pdf

STATEMENT OF WORK (SOW)

FOR OVERHAUL

1.0GENERAL

1.1 BACKGROUND

The U.S. Coast Guard (USCG) Aviation Logistics Center (ALC) requires overhaul services for the applicable Part Numbers (PIN), National Stock Numbers (NSN), and quantity estimates as specified on the Schedule of Supplies/Services (Schedule). The Contractor shall be required to overhaul components to be returned to USCG in a ready for issue (RFI) condition per section titled Applicable Documents.

The Long-Range Surveillance Product Line Division (LRS) supports the HC-130J aircraft by providing logistics, inventory management, and sustainment support for USCG aviation assets utilized by Air Stations geographically located in and outside the continental United States. As part of this responsibility, the LRS has a requirement for sustainment of numerous components used on the aircraft.

1.2 SCOPE

All overhaul actions shall be In Accordance With (IA W) the applicable technical directive or alternate standard approved in writing by USCG LRS Contracting Officer. Components furnished hereunder shall be returned by the Contractor in an airworthy condition and in all respects suitable for installation on the HC-130J aircraft. Certification and documentation requirements apply.

Firm fixed pricing for overhaul shall be at a fully burdened rate. The Contractor shall supply all parts, labor, and materials required to restore these components to a Ready for Issue (RFI) condition.

Incorporation of Service Bulletins (SB) or repairs for Unusual Damage will be priced separately.

The technical requirements in the SOW are identified as the minimum acceptable standards of performance to define an operationally effective system. The Contractor must have access to the applicable technical directives cited in paragraph titled Applicable Documents. In addition to these directives, the Contractor must have access to all performance/test/acceptance criteria and necessary data to ensure the items specified in the Schedule are overhauled, calibrated, and operating IA W the applicable technical directives.

The work required by this SOW is not limited to the installation of overhaul kits. The work shall include repair of all failed components and include replacement of missing hardware, broken parts, and the removal of any foreign matter or corrosion.

1.3 OBJECTIVE

This purchase order will provide an acquisition vehicle for the USCG to maintain an inventory of RFI components to supply depot level maintenance and the field units. It will continue to enhance the USCG's ability to perform the congressionally mandated missions such as search and rescue, law enforcement, international ice patrol, marine environmental protection, and marine resource conservation. With such a demanding operational tempo, aircraft condition and availability are essential to mission success.

1.4 Contractor Facility Certifications

The Contractor shall be either a FAA Overhaul Facility or OEM Certified Overhaul Facility or OEM Certified Distributor or DoD Certified Overhaul Facility to perform overhaul services on the components listed in the Schedule.

1.4.1 FAA-Certified Facility

To demonstrate that the Contractor is properly certified by the FAA, the Contractor must submit their repair station certificate. If the Contractor holds a limited rating, the Contractor must also submit: 1) a capabilities list identifying the relevant part numbers specified on the schedule of services IA W 14 CFR 145.215, and 2) a self-evaluation affirming that the repair station has all of the housing, facilities, equipment, material, technical data, processes, and trained personnel in place to perform the work on the articles identified in the schedule of services IA W 14 CFR 145.215. At the request of the

ATTACHMENT 3 - 70Z03825QH0000088