Attachment 3 - Statement of Requirement (SOR).pdf

STATEMENT OF REQUIREMENT

Bldg 1429 Network Switch Replacement

21 July 2025

Introduction and Background. The Civilian Leadership Development School (CLDS), Bldg 1429, at Maxwell AFB, AL, has a requirement to acquire new network switches to increase network connectivity directly supporting the expanding CLDS mission. This will also serve to replace our existing, older switches that are now at end of service/end of life. Adding new network switches with additional capacity will allow the CLDS to effectively accomplish its growing mission.

1.0 DESCRIPTION OF THE ITEMS. The equipment requirements consist of new Cisco equipment.

2.0 Networking Equipment: The contractor shall provide the following new Cisco equipment.

Note: All licensing is covered under GEMSS for the 9200 model switches.

2.0.1. TAA Cisco Catalyst 9200 48 Port POE+ switch. Part Number: C9200-48P-A++.

Qty: 4.

2.0.2 Catalyst 9200 4 X 1G Network Module. Part Number: C9200-NM-4G. Qty: 5.

2.0.3. Cisco Catalyst 9200 Stack Module. Part Number: C9200Stack Kit. Qty: 5.

3.0. Warranty:

3.0.1. All ITS equipment and cabling supplied must be ITS standard products and supplied from a reputable manufacturer and must carry a minimum 1-year manufacture warranty. No refurbished, recertified, reconditioned, or remanufactured items will be accepted.

4.0 Technical POCs:

4.0.1. Joseph Burnham, 953-4503, joseph.burnham.5@us.af.mil

4.0.2. Rick Hale, 953-1482, richard.hale.4.ctr@us.af.mil

5.0. Shipping Information: The contractor shall provide and deliver the new equipment to:

Maxwell ADPE Warehouse Attn: ADPE ACCOUNT #BOSY, Jon Cain (953-9777) (CSRD 2025-00089) 455 S Kelly St Bldg. 1154 Maxwell AFB, AL 36112 mailto:joseph.burnham.5@us.af.mil mailto:richard.hale.4.ctr@us.af.mil

5.0.1. Delivery of the product will be F.O.B. Destination.

Note: All Cisco equipment must be TAA compliant. Substitutions or non-compliant items will not be accepted. All equipment must be new; used, refurbished, recertified, or reconditioned items are strictly prohibited.

6.0. Security Requirements For Unclassified Services Only, No CAC Required

6.0.1. Contractor Notification Responsibilities: The contractor shall notify the contracting officer within 30 days before on-base performance of the service. The notification shall include:

a. Name, address, and telephone number of contractor employees working on the contract.

b. The contract number and contracting agency.

c. The location(s) of service performance and future performance, if known.

d. The date service performance begins.

e. Any change to information previously provided under this paragraph.

6.0.2.Installation Access Requirements: As prescribed by the DAFFARS 5352.242-9000, Contractor access to Air Force installations, AFI 31-218, Motor Vehicle Traffic Supervision, and DoDM5200.08v3_AFMAN31-101v3, Installation Perimeter Access Control. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Department of the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished contractor identification badges while visiting or performing work on the installation.

The contractor shall submit a written request on company letterhead to the Contracting Officer (CO) listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, and valid vehicle insurance certificate to obtain a vehicle pass.

During performance of the service, the contractor shall be responsible for obtaining the required identification for newly assigned personnel and for prompt return of credentials for any employee who no longer requires access to the work site.

Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

Failure to comply with these requirements may result in the withholding of final payment.

Vehicle Inspections. All commercial vehicles will be directed to Gate 3 (Kelly St) or Gate 4 (Congressman Dickenson for Gunter) for processing through the Commercial Vehicle Inspection (CVI) Area, when operational. During non-duty hours and holidays, commercial vehicle inspections will be conducted at Gate 1 (Maxwell Blvd) or Gate 4 (Congressman Dickinson Drive) only. Inspection members will conduct thorough inspections of the interior and exterior of the vehicle for items prohibited from the installation such as explosive devices, weapons and ammunition, drugs, and open or closed alcohol containers.

6.0.3. REAL ID Act: All Maxwell Air Force Base and Gunter Annex visitors must present a

REAL ID-compliant credential to be issued a pass. REAL ID-compliant cards have a star marking �on the upper portion of the card. If the card does not have a star marking, it is not REAL ID-compliant and won’t be accepted as proof of identity to board commercial aircraft or access military installations like Maxwell or Gunter.

Those without a REAL ID-compliant driver’s license may also use a U.S. passport or passport card, a Transportation Worker Identification Card (TWIC), a Veteran Health Identification Card (VHIC), or a combination of the following documents to be issued a pass:

• An original or certified true copy of a birth certificate with a raised seal

• A social security card

• A driver’s license issued by a state, territory, or the District of Columbia that is not REAL ID-compliant.

All three documents must reflect the same name (or a documented former name through legal name change documents such as a court order, marriage certificate, or divorce decree).

More information about accessing Maxwell can be found here: https://www.maxwell.af.mil/About-Us/Fact- Sheets/Display/Article/4024201/base-access-information/

6.0.4 Controlled/Restricted Areas: If work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with DAFI 31-101, Integrated Defense, and DoDM5200.02_DAFMAN 16-1405, Air Force Personnel Security Program.

http://www.maxwell.af.mil/About-Us/Fact-

If unescorted access is not authorized and the contractor requires access to controlled/restricted areas, they must be escorted by appropriately cleared government personnel at all times.

If work is required in a classified environment, the area must be sanitized, and the contractor will be escorted at all times by appropriately cleared government personnel.

6.0.5. Reporting Requirements: The contractor shall comply with DAFI 71-101, Volume-1, Criminal Investigations, and AFI 71-101, Volume-2, Protective Service Matters, requirements. Contractor personnel shall report to 42d Air Base Wing Information Protection Office, any information or circumstances of which they are aware may pose a threat to the security of DoD personnel, contractor personnel, resources, and classified or unclassified defense information. Contractor employees shall be briefed by their immediate supervisor upon initial on-base assignment and as required thereafter.

6.0.6.Traffic Laws: The contractor and their employees shall comply with base traffic regulations set forth in AFI 31-218, Motor Vehicle Traffic Supervision and DoDM5200.08v3_AFMAN31-101v3, Installation Perimeter Access Control. Personnel in violation may be issued a Central Violations Bureau Form 1805 traffic ticket.

6.0.7. Random Installation Entry/Exit Checks: Entry/exit vehicle checks are conducted by order of the 42 ABW Commander. These checks are conducted for the purpose of safeguarding the base and protecting government property by discovering and seizing stolen property, classified information, and contraband. Refusal to submit to an installation (entry/exit) vehicle check may result in the loss of base driving privileges, revocation of base registration, or debarment action.

6.0.8. Cellular Phone Operation Policy: The use of cellular phones while operating a motorized vehicle is prohibited on Maxwell-Gunter. Although discouraged, drivers are authorized to use devices, i.e. ear bud or ear boom, which allows their cellular phone to be operated hands-free. The device must not cover both ears. This policy applies to everyone driving on Maxwell AFB and Gunter Annex. Personnel in violation may be issued a Central Violations Bureau Form 1805 traffic ticket.

6.0.9. Wireless Electronic Devices: The contractor will not establish their own Information Technology (IT) systems or networks (Local Area Networks [LAN], Wide Area Network [WAN], Cellular phone/USB Modem as WAN, Wi-Fi as WAN, etc.), or camera system without the direct permission of the Program Manager and governing communications and responsible information systems office (42 CS).

6.0.10. Firearms and Ammunition: Transporting weapons or ammunition, concealed or otherwise, IS NOT permitted by any non-law enforcement personnel on Maxwell AFB/Gunter Annex at any time regardless of state issued concealed weapons/LEOSA permits. Violations may result in criminal prosecution under applicable federal laws.

6.0.11. Illegal Weapons. The weapons below are considered illegal, unless specifically authorized by competent authority and are prohibited on Maxwell AFB/Gunter Annex.

Violations may result in criminal prosecution under applicable federal laws.

a. Switchblade knives or knives with any type of automatic blade release.

b. An incendiary/explosive weapon (e.g., grenades, flash bangs).

c. Fireworks

d. Homemade mortars, aka "tennis ball launchers" or similar devices.