Attachment 3 - Sample Review Form - Flat Bronze Markers.pdf
PDF 142 KB Posted
- Attached to
- 9930--Supply and Distribute Flat Bronze Markers
- Solicitation number
- 36C78626R0067
About this file
This is a Sample Review Form for Flat Bronze Markers used to evaluate compliance with federal contracting specifications for cemetery markers.
The form documents the inspection and acceptance criteria for 12" x 24" flat bronze markers intended for government use. Key specifications include: pigmented finish in Munsell Color Standard notation (0.5Y2249/1.0), bare bronze field texture, letter heights of 1" (L2) and 3/4" (L4), and a reverse side with sand texture stamped with 1/2" letters reading "Property of US Government." The markers must be equipped with four 5" or 6" threaded brass rods (3/8-16 NC-2) with nuts and washers, with bosses drilled to a depth not exceeding 7/16 inch containing at least three complete threads. Washers must be 2" x 2", 18-gauge reinforced brass with 3/8" centered holes. Workmanship standards require freedom from bends, warps (deflection less than 1/16 inch), wrinkles, and scratches, with centered and aligned placement. Additional requirements include a random woven loop border (excluded for T1 samples), uniform glossy coating free of bare spots, blistering, and peeling, and hole placement 9" from center and 3-1/2" from top/bottom. The form accommodates evaluation of four sample types (B1, B6, T1, T6) with acceptance/unacceptance checkboxes for each criterion and references drawings A-B1 (dated 2019-09-23) and A-T1 (dated 2007-03-01).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 36C78626R0067 0003.docx | DOCX document | |
| 36C78626R0067 - Flat Bronze Markers - Amendment 2.docx | DOCX document | |
| Questions-Answers - Flat Bronze Markers - 36C78626R0067 Amendment 2.docx | DOCX document | |
| 36C78626R0067 0002.docx | DOCX document | |
| 36C78626R0067 - Flat Bronze Markers.docx | DOCX document | |
| Questions-Answers - Flat Bronze Markers - 36C78626R0067 Amendment 1.docx | DOCX document | |
| 36C78626R0067 0001.docx | DOCX document | |
| Attachment 5 - Past Performance Questionnaire.docx | DOCX document | |
| Attachment 2 - All Drawings Portfolio - Flat Bronze Markers.pdf | ||
| 36C78626R0067_1.docx | DOCX document | |
| Attachment 4 - CDR.pdf | ||
| Attachment 1 - Price-Cost Schedule - Flat Bronze Markers.xlsx | XLSX spreadsheet |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATE: PREPARED BY:
OFFEROR: CEMETERY:
SOLICITATION #: DATE RECEIVED:
SHIPPED BY:
TYPE:
SHIPPING TRACKING #'S:
CRITERIA SPECIFICATION SAMPLE ACCEPTED / UNACCEPTED COMMENTS
Size 12" x 24"
Pigmented Finish Munsell Color Standard notation: 0.5Y2249/1.0
Field Texture Bare Bronze
L2 letter height 1"
L4 letter height 3/4"
Reverse Side Sand Texture-Stamp 1/2" letters "Property of US Government"
Rods/Bossess/ Washers
Four(4) 5 or 6 "3/8-16 NC-2 threaded Brass Rods w/nuts and washers. Bosses drilled to a a depth of not more than 7/16 of an inch and shall contain no less than (3) complete threads. Washers shall be 2" x 2", 18-gauge reinforced brass with 3/8" holes centered
Workmanship Free of bends and warps. Deflection <1/16 inch Free of winkles and scratches.
Centered and Aligned
Border Random Woven Loop Excluded for T1 sample
Coating Unifored, free of bare spots, blistering and peeling. Glossy
Placement of Holes 9" from center and 3-1/2" from top/bottom
Approved Disapproved
INSCRIPTION (Line by Line)
Attachment 3: Sample Review Form - Flat Bronze Markers
CONCURRANCE: (e-sig)
DRAWING #(s) REF: A-B1, dated 2019-09-23, A-T1, dated 2007-03-01
SAMPLE RECOMMENDATION:
REVIEWED BY: (e-sig)
Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted Unaccepted
Accepted
B1 T6B6 T1
Accepted Unaccepted
UnacceptedAccepted
Sheet1
File details come from the government source that posted it. Updated .