Attachment__3_-_Delivery_Installation_Instructions.docx

Centinela State Prison Location 07-0784 Small Business Solicitation

ATTACHMENT #3 DELIVERY / INSTALLATION REQUIREMENTS

Location:

Centinela State Prison 2302 Brown Road, Imperial, CA 92251

TRUCK W/ LIFT-GATE REQUIRED

· Must contact BEP Vendor and BEC to coordinate delivery, installation, programming, testing and on-site training to end user.

· Remove all the packing materials after installation is completed.

· If an unforeseen event prevents the vendor and/or supplier from completing delivery, installation and/or testing as scheduled, supplier must coordinate a second visit to complete any pending tasks.

· Invoices will be signed upon completion of all PO requirements.

· To expedite payment, invoices must include a complete description of each unit, including delivery location number and address, brand, model, serial number, warranty on parts and labor.

· Remove 35 Trade-in vending machines listed in table below.

Visiting A Yard

2 Frozen 3 Cold drink 1 Snack Ambient 6 Wide

1 Frozen # 10022923 1 Cold Food # 10026715 3 Cold Drink # 10007776, 10026212, 10026671 1 Snack # 10026943

Visiting B Yard

1 Frozen # 10026932 1 Cold Food # 10026267 3 Cold Drink # 10007779, 10007781, 10007788 1 Snack # 10026945

Visiting C Yard

1 Frozen # 10026935 1 Cold Food # 10026714 3 Cold Drink # 10007760, 10007761,10007762 1 Snack # 10026944

Visiting D Yard

3 Cold Drink 1 Snack Ambient 6 Wide

1 Frozen # 10022921 1 Cold Food # 10026330 3 Cold Drink # 10007759, 10007764, 10007765 1 Snack # 10026939

Visiting E Yard

1 Frozen 1 Combo 4 Wide

2 Cold Drink # 10006872, 10022920 1 Snack # 10006860

A-B Security

1 Combo 4 Wide

1 Cold Drink # 10007775 1 Snack # 10006858

C-D Security

1 Cold Drink # 10007758 1 Snack # 10006859

PK

2 Cold Drink # 10028053,10028054 1 Snack # 10028052

Staff Entrance

1 Cold Drink # 10026670

Scheduling:

MUST BE COORDINATED 2 WEEKS IN ADVANCE. Must contact BEP Vendor and BEC to coordinate delivery date and time, verify machine placement, configurations, and security / clearance requirements.

Delivery And Installation Requirements:

Equipment to be delivered, set-in-place, installed as per manufacturer’s instructions, remove existing unit(s) and all packing material. Installation must include testing to ensure proper working condition and training of operational features, including suggested operating procedures for coin mechanisms and bill validators, as well as preventative maintenance of vending units (proper cleaning of machine(s), air filters, inlet screens, etc.). It is imperative Supplier provide all necessary components required to complete delivery, set-up, and programming of new machine(s).

NOTE: Vending machines to be set in place, side by side, and banded together at time of installation.

Delivery Terms:

Delivery terms, as specified in paragraph 15 of the General Terms and Conditions, indicates Contractor’s responsibility for the furnishing of equipment and completed installation within 5 weeks (35 calendar days) After Receipt of Order (ARO). Upon the 35th day, equipment specified in this order is to be in place and fully operational. Contractor shall strictly adhere to the delivery terms and schedule as specified in this solicitation. Failure to comply with the delivery requirements may be considered a breach of contract under paragraph 24, entitled “Termination for Default” and paragraph 26, entitled “Rights and Remedies of the State for Default”, resulting in contract termination.

NOTE: In the event delivery terms cannot be met as specified, the awarded Contractor is responsible for notifying BEP within 10 days of receiving this order.

Existing Equipment:

Bid must include an offer for trade-in value OR declaration to move existing equipment to recycler. Prior to equipment transfer, the barcodes, as noted below, must be removed, and returned to the department at the time of invoicing, with a recycling receipt (if applicable). Payment will be delayed if barcodes are not received with invoice. Supplier shall NOT accept any substituted machines or barcodes for removal from premises.

Substitutions, Inspection, Acceptance, and Rejection:

As noted in paragraphs 16, and 17 of the General Terms and Conditions, substitution of goods may not be tendered without advance written consent of the Buyer. All goods may be subject to inspection by the State or its authorized representatives, therefore subject to rejection.

Newly Manufactured Goods:

All Goods furnished under this contract shall be newly manufactured Goods; used or reconditioned Goods are prohibited.

End of Attachment

Attachment #3 – Centinela State Prison Page 1 of 3