Attachment 3 - Contract Classification Specification.pdf

CLASSIFICATION (When filled in): Unclassified

PREVIOUS EDITION IS OBSOLETE. Page 1 of 5

AEM LiveCycle Designer

DD FORM 254, APR 2018

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567 OMB approval expires:

May 31, 2022

The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED

(See Instructions)

Top Secret

b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/

MATERIAL REQUIRED AT CONTRACTOR FACILITY

Secret

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

a. PRIME CONTRACT NUMBER (See instructions.)

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER

W911NF-22-R-0001

DUE DATE (YYYYMMDD)

20220923

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

DATE (YYYYMMDD)

20220921

b. REVISED (Supersedes all previous specifications.)

REVISION NO. DATE (YYYYMMDD)

c. FINAL (Complete Item 5 in all cases.) DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? No Yes If yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? No Yes If yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE

TBD

b. CAGE CODE

TBD

c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)

TBD

7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor) Add Row Remove last Row Delete All Rows

a. NAME, ADDRESS, AND ZIP CODE

TBD

b. CAGE CODE

TBD

c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)

TBD

8. ACTUAL PERFORMANCE (Click button to add more locations.) Add Row Remove last Row Delete All Rows

a. LOCATION(S) (For actual performance, see instructions.)

U.S. Army Research Laboratory 2800 Powder Mill Road Adelphi, MD 20783

b. CAGE CODE (If applicable, see Instructions.)

c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional) Combat Capabilities Development Command Army Research Laboratory 2800 Powder Mill Road Adelphi, MD 20783 301-394-2542

9. GENERAL UNCLASSIFIED DESCRIPTION OF THIS PROCUREMENT

The Army Modernization Priorities IDIQ MAC will support the Army and other Joint Warfighter partners with a quick-reaction contracting vehicle to enable & accelerate the realization of new Army Modernization transformational overmatch capabilities through rapid Research, Develop, Technology, and Evaluation (RDT&E) prototyping, experimentation, testing, analytics, and technology insertion/integration – all aspects of operationalizing science at the speed of relevance through disruptive innovation for dominant Multi-Domain Operations (MDO) and Joint All-Domain Operations (JADO) capabilities.

PREVIOUS EDITION IS OBSOLETE. Page 2 of 5

AEM LiveCycle Designer

DD FORM 254, APR 2018

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION f. SPECIAL ACCESS PROGRAM (SAP) INFORMATION

b. RESTRICTED DATA g. NORTH ATLANTIC TREATY ORGANIZATION

(NATO) INFORMATION

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION (CNWDI) (If CNWDI applies, RESTRICTED DATA must also be marked.) h. FOREIGN GOVERMENT INFORMATION

d. FORMERLY RESTRICTED DATA i. ALTERNATIVE COMPENSATORY CONTROL MEASURES

(ACCM) INFORMATION

e. NATIONAL INTELLIGENCE INFORMATION:

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

j. CONTROLLED UNCLASSIFIED INFORMATION (CUI) (See instructions.)

k. OTHER (Specify) (See instructions.)

NIPRNET/SIPRNET/JWICS

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT

ANOTHER CONTRACTOR'S FACILITY OR A GOVERNMENT

ACTIVITY

(Applicable only if there is no access or storage required at contractor facility.

See instructions.)

b. RECEIVE AND STORE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE, STORE, AND GENERATE CLASSIFIED

INFORMATION OR MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE

THE U.S.,PUERTO RICO, U.S. POSSESSIONS AND TRUST

TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE

TECHNICAL INFORMATION CENTER (DTIC) OR OTHER

SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE A TEMPEST REQUIREMENT

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE

l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED

INFORMATION (CUI).

(DoD Components: refer to DoDM 5200.01, Volume 4 only for specific CUI protection requirements. Non-DoD Components: see instructions.)

m. OTHER (Specify) (See instructions.)

Ref11j. OPSEC: The Contractor will comply with the current ARL OPSEC plan provided by the COR or ACOR

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority.

Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

DIRECT THROUGH (Specify below)

FCDD-RLL-DIS

2800 Powder Mill Road, Adelphi, MD 20783-1138

Public Release Authority:

SEE SECTION 13.

13. SECURITY GUIDANCE Add Signature Remove last Signature Delete All Signatures

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;

and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)

Contract performance: 120 months, From: TBD To: TBD

All contractor personnel shall comply with the provisions of DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM) Incorporating Change 2, May 2016; DoDI 5220.22, National Industrial Security Program, Incorporating Change 1, Effective May 2018; DoDM 5220.22, Vol. 2_AFMAN 16-1406 Vol. 2, National Industrial Security Program: Industrial Security Procedures for Government Activities, May 2020.

See ADDENDUM(s) attached to this DD Form 254.

Antiterrorism/Operations Security Review completed on 06/21/2021 (See Attached)

Will Foreign Nationals be required to work on/or otherwise given access to contract information?: No

PREVIOUS EDITION IS OBSOLETE. Page 3 of 5

AEM LiveCycle Designer

DD FORM 254, APR 2018

30 Days prior to traveling OCONUS, contractors are required to notify their local Security Office.

Subcontractor access for TS/SCI will be approved in ACCS by appointed CM.

A copy of all subcontracts must be forwarded to FCDD-RLL-DIS, 2800 Powder Mill Road, Adelphi, MD 20783 .

Work Locations: The Contractor will only have access to classified information at approved Contractor Facilities and Government Sites.

Government Locations include ARL, DEVCOM, AFC, APG, OSD, COCOMs and others as required.

Security classification guidance on information, hardware, and equipment will be furnished to the contractor at the time access to classified is granted or when classification changes occur. This will include any special projects.

All classified visit requests by Visitor Groups shall be forwarded to the ACOR for approval and need-to-know certification before being sent to the facility to be visited. The ACOR must be notified and approve the receipt and/or generation of classified information under this contract. All classified information received and/or generated under this contract is the property of the U.S. Government regardless of proprietary claims. Upon completion or termination of this contract, the U.S, Government will be contacted for destruction or disposition instructions.

Ref 10a: Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. COMSEC access shall be IAW DoD 5220.22-M. Written concurrence of the GCA is required prior to subcontracting.

Ref 10e1: SCI Access required. No public release of information authorized, public disclosure or confirmation of any subject related to the support contract is not authorized without first obtaining written approval from the GCA.

Ref 10e2: Non-SCI Information is not releasable to contractor employees who have not received a clearance at the appropriate security level. Written concurrence of the GCA is required prior to subcontracting. Access to Intelligence information required for performance.

Ref 10g: Personnel not assigned to a NATO staff position, but requiring access to NATO classified information, NATO COSMIC, NATO Secret or access to the NATO accredited SIPRNET terminals, must possess the equivalent FINAL or Interim U.S. Security Clearance based upon the appropriate personnel security investigation required. Personnel with access to NATO ATOMAL information must have the appropriate level FINAL U.S. Security Clearance. The government program/project manager is the designated representative that will ensure the contractor security manager and concerned employees are NATO briefed prior to access being granted. The contractor will maintain strict compliance in regards to NATO information IAW NISPOM Ch 10, Section 7. Prior approval from the GCA is required for subcontracting.

Ref. 10h: Contractor is permitted access to Foreign Government Information (FGI) in the performance of this contract. Access to foreign government information requires a valid need to know and a United States Government clearance at the appropriate level (interim or final).

The CM will validate access to FGI on a case-by-case basic. The handling, marking, and storage of FGI will be per DoDM 5200.01, Volume 3, “DoD Information Security Program”: Marking Classified Information. Comply with the foreign government information requirements in the NISPOM, Chapter 10, Section 3.

Ref 10j: Controlled Unclassified Information (CUI) generated and/or provided under this contract shall be safeguarded and marked as specified in DoD Instruction 5200.48.

Ref. 10k: The Contractor will require access to NIPERNET, SIPRNET and JWICS during the execution of this contract. The Contractor's FSO will coordinate with ACOR, Government Security Officer and Government Information Assurance Officer for access. SIPRNET and JWICS access is only required for contractors working on a government installation.

The contractor is authorized to courier classified information at the SECRET level between Contractor and Government facilities and classified information at TOP SECRET and above between approved Government facilities.

Ref 11c: The contractor requires access to classified information. Any extracts must apply derivative classifications and markings consistent with the source documents. Use of "Multiple Sources" on the "Derived From" line necessitates compliance with the NISPOM, paragraph 4-208b. Only up to the SECRET Level. All TS/SCI information will only be accessed at a Government or approved Contractor Site.

Ref 11f: Contractor access to classified information abroad is limited to US Government controlled spaces IAW NISP policy. COCOM Locations Only.

PREVIOUS EDITION IS OBSOLETE. Page 4 of 5

AEM LiveCycle Designer

DD FORM 254, APR 2018

Ref 11h: A COMSEC account must be established when accountable COMSEC material is to be provided, acquired, or produced under a contract. The GCA will inform the contractor that a COMSEC account is required.

Ref 11j: OPSEC requirements will be provided by Goverment Secuirty Officers for TS/SCI and SAP Approved Programs.

[Block: 12] DoDAAC[W71B7J] Location Code/Agency Name/Address[W71B7J, USA CCDC ARMY RESEARCH LABORATORY USA CCDC ARMY RESEARCH LABORATORY, 2800 POWDER MILL ROAD BLDG 102 ADELPHI MD 20783-1138, ADELPHI, MD, 20783-1138, USA]

List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form) Show Attachment Bar

NAME & TITLE OF REVIEWING OFFICIAL

Milena Roberts/Security Specialist/Contract Monitor

SIGNATURE

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

No Yes If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted.

(See instructions for additional guidance or use of the fillable PDF.)

Security Requirements are reference in Section 13 & PWS

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

No Yes If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item

13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted.

(See instructions for additional guidance or use of the fillable PDF.)

SCI Information DoDAAC[W71B7J]

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

a. GCA NAME

ACC-APG-RTP

b. ACTIVITY ADDRESS CODE (AAC) OF THE CONTRACTING OFFICE (See Instructions)

c. ADDRESS (Include ZIP Code) 800 Park Office Drive - Suite 4229 Research Triangle Park, North Carolina 27709

d. POC NAME

Christopher Justice

e. POC TELEPHONE (Include Area Code)

+1 (919) 549-4287

f. EMAIL ADDRESS (See Instructions) christopher.d.justice4.civ@army.mil

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.

a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions)

Lawrence Shephard

b. TITLE

Chief, Security Branch

c. ADDRESS (Include ZIP Code)

DEVCOM ARMY RESEARCH LABORATORY, 2800 POWDER

MILL ROAD

BLDG 102 ADELPHI MD 20783-1138, ADELPHI, MD, 20783-113

d. AAC OF THE CONTRACTING OFFICE (See Instructions)

W71B7J

e. CAGE CODE OF THE PRIME CONTRACTOR

(See Instructions.)

TBD

f. TELEPHONE (Include Area Code)

+1 (202) 480-0323

g. EMAIL ADDRESS (See Instructions) lawrence.p.shephard.civ@army.mil

h. SIGNATURE

i. DATE SIGNED (See Instructions)

PREVIOUS EDITION IS OBSOLETE. Page 5 of 5

AEM LiveCycle Designer

DD FORM 254, APR 2018

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND

SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY

ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHER AS NECESSARY (If more room is needed, continue in Item 13 or on additional page if necessary.)

steven.r.murrill2.civ@army.mil

DRAFT

SAMPLE

PREVIOUS EDITION IS OBSOLETE.

Page of AEM LiveCycle Designer

DD FORM 254, APR 2018

NEEDS DD67

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567 OMB approval expires:

May 31, 2022 The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

b. REVISED (Supersedes all previous specifications.)

4. IS THIS A FOLLOW-ON CONTRACT?

If yes, complete the following:

Classified material received or generated under

5. IS THIS A FINAL DD FORM 254?

If yes, complete the following:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors -- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor)

8. ACTUAL PERFORMANCE (Click button to add more locations.)

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

e. NATIONAL INTELLIGENCE INFORMATION:

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

13. SECURITY GUIDANCE

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)

List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form)

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

9.0.0.2.20120627.2.874785 DD 254, DoD Contract Security Classification Specification

Army Research Laboratory 2800 Powder Mill Road Adelphi, MD 20783 301-394-2542

2800 Powder Mill Road Adelphi, MD 20783 Block9:

The Army Modernization Priorities IDIQ MAC will support the Army and other Joint Warfighter partners with a quick-reaction contracting vehicle to enable & accelerate the realization of new Army Modernization transformational overmatch capabilities through rapid Research, Develop, Technology, and Evaluation (RDT&E) prototyping, experimentation, testing, analytics, and technology insertion/integration – all aspects of operationalizing science at the speed of relevance through disruptive innovation for dominant Multi-Domain Operations (MDO) and Joint All-Domain Operations (JADO) capabilities.

the current ARL OPSEC plan provided by the COR or ACOR

2800 Powder Mill Road, Adelphi, MD 20783-1138

All contractor personnel shall comply with the provisions of DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM) Incorporating Change 2, May 2016; DoDI 5220.22, National Industrial Security Program, Incorporating Change 1, Effective May 2018; DoDM 5220.22, Vol. 2_AFMAN 16-1406 Vol. 2, National Industrial Security Program: Industrial Security Procedures for Government Activities, May 2020.

See ADDENDUM(s) attached to this DD Form 254.

Antiterrorism/Operations Security Review completed on 06/21/2021 (See Attached)

Will Foreign Nationals be required to work on/or otherwise given access to contract information?: No

30 Days prior to traveling OCONUS, contractors are required to notify their local Security Office.

Subcontractor access for TS/SCI will be approved in ACCS by appointed CM.

A copy of all subcontracts must be forwarded to FCDD-RLL-DIS, 2800 Powder Mill Road, Adelphi, MD 20783 .

Work Locations: The Contractor will only have access to classified information at approved Contractor Facilities and Government Sites. Government Locations include ARL, DEVCOM, AFC, APG, OSD, COCOMs and others as required.

Security classification guidance on information, hardware, and equipment will be furnished to the contractor at the time access to classified is granted or when classification changes occur. This will include any special projects.

All classified visit requests by Visitor Groups shall be forwarded to the ACOR for approval and need-to-know certification before being sent to the facility to be visited. The ACOR must be notified and approve the receipt and/or generation of classified information under this contract. All classified information received and/or generated under this contract is the property of the U.S. Government regardless of proprietary claims. Upon completion or termination of this contract, the U.S, Government will be contacted for destruction or disposition instructions.

Ref 10a: Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. COMSEC access shall be IAW DoD 5220.22-M. Written concurrence of the GCA is required prior to subcontracting.

Ref 10e1: SCI Access required. No public release of information authorized, public disclosure or confirmation of any subject related to the support contract is not authorized without first obtaining written approval from the GCA.

Ref 10e2: Non-SCI Information is not releasable to contractor employees who have not received a clearance at the appropriate security level. Written concurrence of the GCA is required prior to subcontracting. Access to Intelligence information required for performance.

Ref 10g: Personnel not assigned to a NATO staff position, but requiring access to NATO classified information, NATO COSMIC, NATO Secret or access to the NATO accredited SIPRNET terminals, must possess the equivalent FINAL or Interim U.S. Security Clearance based upon the appropriate personnel security investigation required. Personnel with access to NATO ATOMAL information must have the appropriate level FINAL U.S. Security Clearance. The government program/project manager is the designated representative that will ensure the contractor security manager and concerned employees are NATO briefed prior to access being granted. The contractor will maintain strict compliance in regards to NATO information IAW NISPOM Ch 10, Section 7. Prior approval from the GCA is required for subcontracting.

Ref. 10h: Contractor is permitted access to Foreign Government Information (FGI) in the performance of this contract. Access to foreign government information requires a valid need to know and a United States Government clearance at the appropriate level (interim or final). The CM will validate access to FGI on a case-by-case basic. The handling, marking, and storage of FGI will be per DoDM 5200.01, Volume 3, “DoD Information Security Program”: Marking Classified Information. Comply with the foreign government information requirements in the NISPOM, Chapter 10, Section 3.

Ref 10j: Controlled Unclassified Information (CUI) generated and/or provided under this contract shall be safeguarded and marked as specified in DoD Instruction 5200.48.

Ref. 10k: The Contractor will require access to NIPERNET, SIPRNET and JWICS during the execution of this contract. The Contractor's FSO will coordinate with ACOR, Government Security Officer and Government Information Assurance Officer for access. SIPRNET and JWICS access is only required for contractors working on a government installation.

The contractor is authorized to courier classified information at the SECRET level between Contractor and Government facilities and classified information at TOP SECRET and above between approved Government facilities.

Ref 11c: The contractor requires access to classified information. Any extracts must apply derivative classifications and markings consistent with the source documents. Use of "Multiple Sources" on the "Derived From" line necessitates compliance with the NISPOM, paragraph 4-208b. Only up to the SECRET Level. All TS/SCI information will only be accessed at a Government or approved Contractor Site.

Ref 11f: Contractor access to classified information abroad is limited to US Government controlled spaces IAW NISP policy. COCOM Locations Only.

Ref 11h: A COMSEC account must be established when accountable COMSEC material is to be provided, acquired, or produced under a contract. The GCA will inform the contractor that a COMSEC account is required.

Ref 11j: OPSEC requirements will be provided by Goverment Secuirty Officers for TS/SCI and SAP Approved Programs.

[Block: 12] DoDAAC[W71B7J] Location Code/Agency Name/Address[W71B7J, USA CCDC ARMY RESEARCH LABORATORY USA CCDC ARMY RESEARCH LABORATORY, 2800 POWDER MILL ROAD BLDG 102 ADELPHI MD 20783-1138, ADELPHI, MD, 20783-1138, USA]

BLDG 102 ADELPHI MD 20783-1138, ADELPHI, MD, 20783-113