Attachment_2B_Pallet_Spec_3990-01A-01.pdf
PDF 874 KB Posted
- Attached to
- Envelopes
- Solicitation number
- 0000034618
- Issued by
- California
About this file
State of California Bid Specification for Wooden Pallets
This is a State of California Bid Specification document for wooden pallets, applicable to multiple agencies utilizing the statewide procurement system. The specification covers wooden pallets intended for use with low lift pallet trucks or forklift trucks and establishes technical requirements for two primary pallet types: Type 2 (standard two-way pallets) and Type 4 (single wing pallets). The specification details six commonly used pallet sizes ranging from 42"L x 36"W to 48"L x 48"W for Type 2 pallets, with deck boards constructed from 1" x 6" lumber in various configurations. Each pallet size includes specifications for both top and bottom deck board placement and quantity requirements. The document was revised on February 10, 2020 (Revision Level 1) to address ADA compliance and remove non-applicable requirements from the original January 2001 specification.
All pallets must be constructed of sturdy materials in adequate condition to ensure safe delivery of goods without damage or safety hazards. The specification establishes minimum construction standards but references no specific applicable laws or industry standards beyond the technical requirements outlined. Bidders responding to procurement solicitations using this specification must provide wooden pallets meeting the detailed dimensional and construction requirements for the applicable pallet types and sizes as defined in the technical requirements section.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB__0000034618.docx | DOCX document | |
| Attachment_4_-_Ecolabel_Certification_Form.pdf | ||
| Attachment_2_-_Technical_Specifications.pdf | ||
| Attachment_1_-_Pricing_Worksheet.xlsx | XLSX spreadsheet | |
| Attachment_2A_-_Envelope_Diagrams.pdf | ||
| Attachment_3_-_Narrative_Response.xlsx | XLSX spreadsheet | |
| APP_Cover_Page_0000034618.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California Bid Specification
PALLETS, WOODEN
3990-01A-01 Rev1 Event ID: 0000034618
Attachment 2B
Lai, Y Page 1 of 5 FEB. 10, 2020
Document Summary Detail Type Detail Event ID 0000034618 Commodity PALLETS, WOODEN Attachment (Exhibit) Attachment 2B Group-Class 3990 Bid Specification 3990-01A-01 Revision Level 1 Revision Date Feb 10, 2020 Agency Name Multiple
Revision History Bid Spec
Rev Level
Revision Date
Author Summary of Changes
3990-01A-01 0 Jan, 2001 Staff Initial release 3990-01A-01 1 Jan 21, 2020 Lai, Y ADA compliance, removed non-applicable requirements.
PALLETS, WOODEN
3990-01A-01 Rev1 Event ID: 0000034618
Lai, Y Page 2 of 5 FEB. 10, 2020
Table of Contents Document Summary Revision History Table of Contents
1.0 SCOPE
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
3.2 COMMONLY USED PALLET SIZE
3.3 PALLETS QUALITY
PALLETS, WOODEN
3990-01A-01 Rev1 Event ID: 0000034618
Lai, Y Page 3 of 5 FEB. 10, 2020
1.0 SCOPE
This specification covers wooden pallets intended for use with low lift pallet trucks or forklift trucks.
2.0 APPLICABLE LAWS and INDUSTRY STANDARDS
Not applicable
3.0 TECHNICAL REQUIREMENTS
3.1 COMMONLY USED PALLET TYPES
The pallets shall be constructed base on the type in Figure 1 and Figure 2.
Figure 1 – Type 2 Wooden Pallet
PALLETS, WOODEN
3990-01A-01 Rev1 Event ID: 0000034618
Attachment N/A
Lai, Y Page 4 of 5 FEB. 10, 2020
Figure 2 - Type 4 Single Wing Wooden Pallet
3.2 COMMONLY USED PALLET SIZE
The pallets shall be constructed base on the size in Table 1.
Table 1- Commonly Used Pallet Types & Size
SIZE TYPE TOP DECK BOTTOM DECK
1 2 (Fig. 1) 42”L x 36”W
Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
42”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
2 2 (Fig. 1) 42”L x 42”W Min. Six 1” x 6” x 42” deck-boards, spaced evenly along the pallet width
42”L x 42”W Min. Four 1” x 6” x 42” boards.
One placed each end of the stingers Two at center of the stringers
3 2 (Fig. 1) 44”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
44”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers(Fig. 1)
4 2 (Fig. 1) 45”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width
45”L x 36”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers Two at center of the stringers
PALLETS, WOODEN
3990-01A-01 Rev1 Event ID: 0000034618
Attachment N/A
Lai, Y Page 5 of 5 FEB. 10, 2020
5 2 (Fig. 1) 46”L x 44”W Min. Six 1” x 6” x 44” deck-boards, spaced evenly along the pallet width
46”L x 44”W Min. Four 1” x 6” x 44” boards.
One placed each end of the stingers Two at center of the stringers
6 2 (Fig. 1) 48”L x 48”W Min. Six 1” x 6” x 48” deck-boards, spaced evenly along the pallet width
48”L x 48”W Min. Four 1” x 6” x 48” boards.
One placed each end of the stingers Two at center of the stringers
1 4 (Fig. 2) 42”L x 36”W Min. Six 1” x 6” x 36” deck-boards, spaced evenly along the pallet width with 3” wings extending beyond the stringers outboard faces Note: SIZE 1, TYPE 4 - has a single wing applied to top deck.
42”L x 30”W Min. Four 1” x 6” x 36” boards.
One placed each end of the stingers, Two at center of the stringers
3.3 PALLETS QUALITY
All pallets shall be of sturdy construction and adequate condition to assure delivery of the goods without damage to the goods or safety hazards.
| Document Summary |
| Revision History |
| Table of Contents |
| 1.0 SCOPE |
| 2.0 APPLICABLE LAWS and INDUSTRY STANDARDS |
| 3.0 TECHNICAL REQUIREMENTS |
| 3.1 COMMONLY USED PALLET TYPES |
| 3.2 COMMONLY USED PALLET SIZE |
| 3.3 PALLETS QUALITY |
File details come from the government source that posted it. Updated .