Attachment_2-_Supply_Requirement.pdf

Supply Requirement Amphibious Track Vehicle, Minnesota Valley NWR

BODY:

• 15' 10" Long (minimum) x 8’6” Wide (maximum) x 8’4”

High (maximum)

• All Welded 1/8” Aluminum Body with 3/16” High

Strength Pontoon Bottoms

• 7000 LB (maximum machine weight)

• 1500 lb. Floating Load Capacity

• Overhead Rack/Brush guard, and Windshield

• Walking deck full width of the tracks with slip resistant coating on decks (Line X or comparable)

• All Stainless-Steel Fasteners throughout machine

• 32” Ground Clearance (minimum)

• Minimum 25 Gallon secured aluminum fuel tank mounted in rear bed area easily accessible and serviceable

• Rear mounted hydraulic three-point hitch with quick tach system

• Overhead cargo rack (capable of supporting minimum of

100 lb. of gear)

• Catwalk over winch

• Rearview camera with cab display

• Removable deck inserts to convert bed area to flat deck

• (2) plugs installed in the floorboard of the driver and passenger floorboard for drain purpose

• Cab Blowers

DRIVE SYSTEM:

• Kohler 2504 TCR 74 HP 4-cylinder water Cooled Turbo diesel.

• TIER 4 FINAL CERTIFIED MEETING ALL

REQUIREMENTS SET FORTH BY THE EPA FOR

2019 OFF ROAD DIESEL ENGINES

• Twin Hydrostatic Transmission

• Oil bath lubricated low speed/high torque final drives that requires NO external greasing of bearings

• Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

• Side by side radiator/hydraulic oil cooler

SPEED:

• 8 mph minimum on land, 1 mph minimum in water

TRACK SYSTEM:

• Maximum 28” Wide Polymer Cleats on 4" centers

• Two Wide Low Stretch Rubber Belts per Track

• Four Rows of Urethane Drive Lugs/Track Guides per

Track

• Four UHMW Drive Sprockets per Track

• Eighteen urethane Bogie Wheels per Track

• Nine oil bath lubricated bogey axle assemblies per pontoon. Must be internally oil bath lubricated and sealed requiring no external greasing.

• All corrosion-proof stainless-steel track bolts and hardware for saltwater usage

• No external grease points anywhere on rear drive or bogey system

• Front idler shafts and rear drive shafts to be stainless steel.

ELECTRICAL SYSTEM:

• Minimum 12 Volt Battery Secured in Enclosed

Compartment

• Multifunction engine display

• Minimum (2) LED Front Lights and (2) LED Rear Lights

• Battery cut-off switch

• Rocker switch on panel for emergency lights with label

(wires ran to top storage basket through frame with pigtail)

• USB and USB-C Charging Ports

WINCH-JACK:

• Front Mounted 10,000lb Hydraulic Winch with 130’ of

3/8" cable (minimum)

• Weight rated jack to lift the machine

FIRE SUPPRESSION SYSTEM

• Minimum (2) – 55-gallon Aluminum Water Tank built into each pontoon

• Water Level Gauge for Tanks (Mounted in cab)

• Hydraulic Motor Driven, Self-priming Centrifugal High-

Volume Water Pump

• Minimum 15’ 1 1/2 Suction Hose for quick fill

• 12’ and 25’ 1 1/2” Discharge Hose (Goodyear Pli-Cord)

• Fog & Stream Spray Brass Nozzle

• Camlock Hose Connections for Pump

LOW FLOW AND HIGH FLOW

AUXILIARY HYDRAULIC CIRCUITS:

• Low flow auxiliary hydraulic circuit 3-8gpm@3000psi and 2000 rpm (for spraying water)

• High flow auxiliary hydraulic circuit 30 GPM max @

3500 psi/2600 rpm (for cutter attachment)

MACHINE/ENGINE WARRANTY:

• Factory Direct

• 1 Year or 1000 hr. warranty

• Engine warranty 3yr or 2000 hr. 100% parts and labor

CUTTER ATTACHMENT:

• Hydraulic driven rotary cutter attachment

Supply Requirement Amphibious Track Vehicle, Minnesota Valley NWR

TRAILER SPECIFICATIONS:

• Maximum 8’ wide x 18’ long tilt deck (max deck height

38”, maximum overall length 27’)

• 2” x 10” #1 treated deck

• (2) 7000 lb top mount, high profile torsion bars

• Machine access ladder

• Load range E 235/75R16 commercial tires, with galvanized rims

• Matching spare tire and rim, mounted on trailer

• 12” - 8 on 6.5 - electric brakes

• Electric brake actuator with breakaway

• 2 5/16” forged adjustable coupler

• Minimum GVWR of 13,000 lbs.

• Minimum 5000# tongue jack

• Manual tilt 3” hydraulic cylinder with dampener

• Galvanized steel frame with 6” channel

• Four (4) D-ring tie downs

• 2 galvanized safety chains per DOT specs

• Light package with (4) LED stop/tail, (4) 2” amber clearance lights and (7) red clearance lights

• Reflector package with (4) 2” red and (2) 2” amber and reflective tape side and rear per DOT standards

• 7 pin round lug light connector

• 4 tie down straps weight rated for the machine to secure machine to the trailer

Delivery Date:

On or before 7/01/2026; Period of performance extension will be granted if necessary.

Delivery location:

MN Valley NWR 15850 Rapids Lake Road Carver, MN 55315