Attachment 2 Statement of Work Part B Rm 121 and 122.pdf

United States Department of Agriculture Agricultural Research Service

STATEMENT OF WORK

Forage and Range Remodel Phase 2 Rooms 121 and 122

Forage and Range Research Laboratory 690 North 1100 East, USU Campus Logan, UT 84322-6300

DATE: Feb 28, 2024

STATEMENT OF WORK

TABLE OF CONTENTS

1.0 Project Information

2.0 Project Contact Persons

3.0 Scope of Work

4.0 Project Requirement Details

5.0 Map

1.0 Project Information:

A. Project Number: 1129711

Project Title: Forage and Range Remodel Phase 2 Rooms 121 and 122

B. Project Location: USDA, ARS - FRR

690 North 1100 East Utah State University Logan, UT 84332-6300

2.0 Project Contact Persons:

A. CONTRACTING OFFICER (CO): Michael Sherlock

Email: Michael.Sherlock@usda.gov

B. RESEARCH PROGRAM REPRESENTATIVES (RPR):

Ramsey Buffham Email: Ramsey.Buffham@usda.gov

C. LOCATION ADMINISTRATIVE OFFICER (LAO):

TBD

D. Location Coordinator

TBD

3.0 Scope of Work:

The Contractor shall provide all professional services necessary for the accomplishment of each project and such required services shall be in accordance with requirements as described herein.

Background: The general overview is that each lab has some existing cabinetwork that will need to be removed, the floors will need cleaned, prepared and re-tiled, the walls prepared and painted, plumbing and electrical dealt with, and then new steel case cabinets and counter tops installed. No changes will be made to the ceiling tile or lighting in this lab.

All diagrams and part numbers for steel casework are from Formaspace, 1100 East Howard Lane, #400, Austin, TX 78753. Cabinetwork will be provided by the Forage and Range Lab.

Hours of Operation: Access shall typically be 7:00 am till 5:30 pm Monday through Thursday, and 7:00 am till 4:30 Friday, unless other arrangements are made.

4.0 Project Requirement Details

Room 121/122

1. Remove existing casework, sink and cabinets, upper and lower. Cap utilities as required. Coordinate any water, air, and electrical outages with FRR staff. Retain wall mounted dish drying rack for re-installation.

2. Cap the natural gas, vacuum, and compressed air, they will not be installed in the new cabinets.

3. The contractor will be responsible for removal and disposal of all cabinets and construction debris.

4. Prepare, patch, prime and paint the walls, use PPG Manor Hall 82-3510 interior semi-gloss paint color NB1 NG6, NL5 for the topcoat.

5. Remove old tile, clean and prepare the floor, lay VCT tile over the floor.

Use Armstrong 51858031 Sandrift White tile, 12”x12”x1/8”, Provided by the FRRL. Install the tile according to the manufacturer’s instructions.

6. Protect the tile with 2 coats of Armstrong S-495 Commercial Floor Sealer.

Follow this with three coats of Armstrong S-480 Commercial Floor Polish, spray buffing after the last coat per instructions at the end of this packet.

7. Install 4” black rubber cove around all walls and cabinet work.

8. Install new light switches Leviton Model# R52-01221-20W or equal, and receptacles, white 20 amp industrial grade Leviton Model #R72-05352- 0WS, or equivalent. All outlets, unless noted, will receive new stainless steel or raised industrial covers as appropriate. All covers will be labeled with a printed label specifying the source panel and breaker number (example: D1 15 (panel D1 breaker 15)).

9. Install new cabinets/casework per drawings and specs provided. Cardinal directions on the diagrams are not correct, disregard them.

10. Install new sink and countertops.

11. Install new DI water faucet, provided.

12. Install new sink faucet, provided.

13. Install a new eye wash, fixture supplied by the FRRL.

14. Install DI water filtration system in the cabinet left of the sink.

15. Install GFI outlet in the DI cabinet for use by the DI filtration system.

16. Reinstall dish drying rack on the wall, paper towel and soap dispensers, provided.

5.0 Diagrams, photos and further information

Existing Room 121/122

5.0 Map

S-495 Commercial Floor Sealer "Product Information" Data Sheet / Product Spec Sheet for S-495 Commercial Floor Sealer

Sep 9, 2021•Knowledge

PRODUCT ATTRIBUTES

Use: Commercial

Use For:

Commercial resilient flooring Asphalt tile

Color: Milky, dries clear

Spread Rate: 1,500 to 2,000 square feet per gallon per coat

• Stain resistant sealer for porous or well-worn floor surfaces

• Water-based acrylic emulsion

• Provides an excellent base for S-480 Commercial Floor Polish or other commercial floor polishes

• 16% solids for easy application and excellent leveling

• Semi-permanent for resistance to conventional polish stripping

• High durability for long lasting protection

• pH of 7.8 One year

Shelf Life: One year if not opened. Keep from freezing

Available Units: Gallon - 4 gal/ctn; 5 Gallon

VOC: 0.0% per CARB Rules

STORAGE: Keep from freezing.

MSDS

Refer to the Safety Data Sheet for additional product information.

ORDER & WAREHOUSE INFORMATION

Language English/Spanish Size 1 gallon

5 gallons Item No. 1 gallon - 00495408

5 gallons - 00495508

Item UPC 1 gallon - 042369925273 (ctn)

042369165198 (bottle) 5 gallons - 042369065207

Carton Dimensions

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H Carton Weight 1 gallon - 36.58 lbs

5 gallons - 45.39

Items per Carton 1 gallon - 4

5 gallons - Containers sold individually https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-Product-Information https://armstrongflooring.my.site.com/ArmstrongConnect/s/article/S-495-Commercial-Floor-Sealer-MSDS?r=318&ui-knowledge-components-aura-actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1

Cartons per Pallet 1 gallon - 40 5 gallons - 36

DIRECTIONS FOR USE

FLOOR PREP:

• Sweep or vacuum thoroughly

• Mop or scrub the floor with properly diluted S-485 Commercial Floor Cleaner

• Rinse carefully, if needed

• Let floor dry

SEAL AND POLISH:

• Apply 1 to 2 coats

• Pour sealer into a clean bucket (never pour sealer directly onto floor)

• Use a clean finish mop (rayon) or finish applicator

• Let dry 60 minutes between coats and before applying polish

• Apply 3 to 5 coats of S-480 Armstrong Commercial Floor Polish

STRIP:

• Strip using a commercial floor stripper, following label directions

• Scrub with a 3M blue pad, scrub brush or equal

PRODUCT IMAGE

https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-485-Commercial-Floor-Cleaner-Product-Information https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-Product-Information

S-480 Commercial Floor Polish "Product Information" Data Sheet / Product Spec Sheet for S-480 Commercial Floor Polish

Jan 16, 2021•Knowledge

PRODUCT ATTRIBUTES

Use: Commercial Use For:

All Armstrong commercial vinyl floor coverings except Excelon SDT Asphalt and rubber tile Linoleum Ceramic - although not of much value on glazed ceramic Slate and terrazzo although other products are designed for better results

Do Not Use For: Wood and marble

Color: Milky, dries clear

Spread Rate: 1,500 to 2,000 square feet/gallon/coat depending on surface characteristics of the floor

• High durability for long-lasting protection.

• Metal cross-linked acrylic copolymer emulsion polish.

• 18% solids for easy application and excellent leveling.

• Dries bright for areas where buffing is not applicable or desired.

• Excellent buffing response for spray-buffing repairs or high-speed burnishing programs (up to 2,000 rpm).

• Readily strippable.

• Meets the ASTM D2047 standard for slip resistance on dry floors.

• pH of 8.5 - 8.75.

Shelf Life: One year if not opened. Keep from freezing.

Available Units: Gallon - 4 gal/ctn; 5 Gallon

VOC: VOC Content: 0%; as required by California General Consumer Products Rule, California Code of Regulations

STORAGE: Keep from freezing.

MSDS

Refer to the Material Safety Data Sheet for additional product information.

ORDER & WAREHOUSE INFORMATION

Language English/Spanish English/French

Size 1 gallon 5 gallons

1 gallon (3.78L) 5 gallons (18.9L)

Item No. 1 gallon - 00480408 5 gallons - 00480508

1 gallon - S-480601 5 gallons - S-480603

Item UPC 1 gallon - 042369059503 (ctn)

042369159500 (bottle) 5 gallons - 042369059534

1 gallon - 10042369159866 (ctn) 042369159869 (bottle)

5 gallons - NA

Carton Dimensions

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H

Carton Weight 1 gallon - 37.09 lbs 5 gallons - 45.56

1 gallon - 37.09 lbs (16.3 kg/ctn) 5 gallons - 45.5 (21.3 kg)

Items per Carton 1 gallon - 4

5 gallons - Containers sold individually

1 gallon - 4 5 gallons - Containers sold individually Cartons per Pallet

1 gallon - 40 5 gallons - 36

1 gallon - 40 5 gallons - 36

DIRECTIONS FOR USE

FLOOR PREP:

Sweep or vacuum thoroughly Wash with S-485 Armstrong Floor Cleaner Rinse thoroughly Let floor dry

POLISH - LOW TRAFFIC:

Apply 3 to 5 coats (do not apply more than four coats of polish at one time; wait a minimum of 24 hours before applying more polish) Pour polish into a clean bucket (never pour polish directly onto floor) Use a clean finish mop (rayon) or finish applicator Let dry 30 minutes between coats https://armstrongflooring.my.site.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-MSDS

POLISH - HIGH TRAFFIC:

Follow instructions above for Low Traffic; then High speed burnish

OR

Spray buff (spray-buff solution one part S-480 to two parts water)

OR

Apply 1 or 2 extra coats