Attachment 1 Statement of Work Part A Rm 17.pdf

United States Department of Agriculture Agricultural Research Service

STATEMENT OF WORK

Forage and Range Remodel, Room 017

Forage and Range Research Laboratory 690 North 1100 East, USU Campus Logan, UT 84322-6300

DATE: 04/26/2024

STATEMENT OF WORK

TABLE OF CONTENTS

1.0 Project Information

2.0 Project Contact Persons

3.0 Scope of Work

4.0 Project Requirement Details

5.0 Map

1.0 Project Information:

A. Project Number: 1129650

Project Title: Forage and Range Remodel, Rooms 017 and 018

B. Project Location: USDA, ARS - FRR building greenhouse

690 North 1100 East Utah State University Logan, UT 84332-6300

2.0 Project Contact Persons:

A. CONTRACTING OFFICER (CO): Michael Sherlock

Email: Michael.Sherlock@usda.gov

B. RESEARCH PROGRAM REPRESENTATIVES (RPR): Ramsey Buffham

Email: Ramsey Buffham@usda.gov

C. LOCATION ADMINISTRATIVE OFFICER (LAO):

TBD

D. Location Coordinator

TBD

mailto:Buffham@usda.gov

3.0 Scope of Work:

The Contractor shall provide all professional services necessary for the accomplishment of each project and such required services shall be in accordance with requirements as described herein.

Background: There is one laboratory in need of remodeling in this phase.

The general overview is that the lab has some existing cabinetwork that will need to be removed, the floors will need cleaned, prepared and re-tiled, the walls prepared and painted, plumbing and electrical dealt with, and then new steel case cabinets and counter tops installed.

All diagrams and part numbers for steel casework are from Formaspace, 1100 East Howard Lane, #400, Austin, TX 78753. Counter tops will be epoxy. Cabinets, countertops, and plumbing fixtures are supplied by the FRRL. Cabinets may come from a different source; these numbers and drawings are for reference purposes only.

4.0 Project Requirement Details Room 017

1. Remove existing casework, sink and cabinets. Retain wall mounted dish drying rack for re-use. Cap utilities as required. Coordinate any water, air, and electrical outages with FRR staff. Retain and reinstall drying rack over the new sink.

2. The contractor will be responsible for removal and disposal of all cabinets and construction debris.

3. Frame in the door connecting to room 016, cover with sheetrock, and prepare for painting.

4. Prepare, patch, prime and paint the walls, use PPG Manor Hall 82-3510 interior semi-gloss paint color NB1 NG6, NL5 for the topcoat.

5. Level the floor and prepare as needed for the installation of casework on the south wall.

6. Clean and prepare the floor, lay VCT tile over the floor.

The floor is currently polished cement with a varnish type sealant on it, that is coming up in a few areas. Use Armstrong 51858031 Sandrift White tile, 12”x12”x1/8”

7. Protect the tile with 2 coats of Armstrong S-495 Commercial Floor Sealer.

Follow this with three coats of Armstrong S-480 Commercial Floor Polish, spray buffing after the last coat per instructions at the end of this packet.

8. Install 4” black rubber base around all walls and cabinet work.

9. Install new light switches Leviton Model# R52-01221-20W or equal, and receptacles, white 20-amp industrial grade Leviton Model #R72-05352- 0WS, or equivalent in existing outlets, excluding the 220v outlet on the east wall. Use white colored outlets and switches.

10. Replace the GFI outlet near the sink with a new GFI outlet.

11. Install drain lines and plumbing for benches on the south wall.

12. Install new casework per drawings and specs provided. On two walls the casework will be held out 6” from the wall to accommodate plumbing and electrical. Cabinet top will cover this space.

13. Install an on-demand water heater under the sink on the south wall under the 24” sink base. This water heater shall feed the faucet on the south wall, not the main sink. The water heater will be provided by the FRRL.

14. Provide electrical for this water heater, placed in the bottom of the sink cabinet. 208v 40 amp

15. Install small sink/drain in cabinet top. Example below, near backsplash in the 24” sink base. The faucet will be the pot filler detailed below.

16.

17. Install commercial grade pot filler with flexible hose and vacuum breaker or backflow prevention on the south wall in the casework close to the back by the small sink in the sink base. Faucet provided by FRRL.

18. Install warning sign on wall behind faucet on south wall warning about hot water.

19. Install five (5) 20-amp receptacles on the south wall per the diagram, and one outlet on the east alcove wall per the diagram, all GFI protected.

These outlets must each be on their own 20-amp circuits.

20. Install tank support for the DI water tanks and reinstall the DI water supply system on the right of the main sink.

21. Re-install dish drying rack on the wall, and new paper towel and soap dispensers which shall be provided by the FRRL.

Outlet details room 017 south and east walls.

-4 GFI on their own 20 amp circuits south wall.

-two duplex receptacles, may be same circuit, north and northwest walls -replace the GFI to the right of the sink on the west wall -add a combo GFI/duplex on the east wall all GFI protected

5.0 Map

S-495 Commercial Floor Sealer "Product Information" Data Sheet / Product Spec Sheet for S-495 Commercial Floor Sealer

Sep 9, 2021•Knowledge

PRODUCT ATTRIBUTES

Use: Commercial

Use For:

Commercial resilient flooring Asphalt tile

Color: Milky, dries clear

Spread Rate: 1,500 to 2,000 square feet per gallon per coat

• Stain resistant sealer for porous or well-worn floor surfaces

• Water-based acrylic emulsion

• Provides an excellent base for S-480 Commercial Floor Polish or other commercial floor polishes

• 16% solids for easy application and excellent leveling

• Semi-permanent for resistance to conventional polish stripping

• High durability for long lasting protection

• pH of 7.8 One year

Shelf Life: One year if not opened. Keep from freezing

Available Units: Gallon - 4 gal/ctn; 5 Gallon

VOC: 0.0% per CARB Rules

STORAGE: Keep from freezing.

MSDS

Refer to the Safety Data Sheet for additional product information.

ORDER & WAREHOUSE INFORMATION

Language English/Spanish Size 1 gallon

5 gallons Item No. 1 gallon - 00495408

5 gallons - 00495508

Item UPC 1 gallon - 042369925273 (ctn)

042369165198 (bottle) 5 gallons - 042369065207

Carton Dimensions

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H Carton Weight 1 gallon - 36.58 lbs

5 gallons - 45.39 https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-Product-Information https://armstrongflooring.my.site.com/ArmstrongConnect/s/article/S-495-Commercial-Floor-Sealer-MSDS?r=318&ui-knowledge-components-aura-actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1

Items per Carton 1 gallon - 4

5 gallons - Containers sold individually

Cartons per Pallet 1 gallon - 40 5 gallons - 36

DIRECTIONS FOR USE

FLOOR PREP:

• Sweep or vacuum thoroughly

• Mop or scrub the floor with properly diluted S-485 Commercial Floor Cleaner

• Rinse carefully, if needed

• Let floor dry

SEAL AND POLISH:

• Apply 1 to 2 coats

• Pour sealer into a clean bucket (never pour sealer directly onto floor)

• Use a clean finish mop (rayon) or finish applicator

• Let dry 60 minutes between coats and before applying polish

• Apply 3 to 5 coats of S-480 Armstrong Commercial Floor Polish

STRIP:

• Strip using a commercial floor stripper, following label directions

• Scrub with a 3M blue pad, scrub brush or equal

PRODUCT IMAGE

https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-485-Commercial-Floor-Cleaner-Product-Information https://armstrongflooringpartner.force.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-Product-Information

S-480 Commercial Floor Polish "Product Information" Data Sheet / Product Spec Sheet for S-480 Commercial Floor Polish

Jan 16, 2021•Knowledge

PRODUCT ATTRIBUTES

Use: Commercial Use For:

All Armstrong commercial vinyl floor coverings except Excelon SDT Asphalt and rubber tile Linoleum Ceramic - although not of much value on glazed ceramic Slate and terrazzo although other products are designed for better results

Do Not Use For: Wood and marble

Color: Milky, dries clear

Spread Rate: 1,500 to 2,000 square feet/gallon/coat depending on surface characteristics of the floor

• High durability for long-lasting protection.

• Metal cross-linked acrylic copolymer emulsion polish.

• 18% solids for easy application and excellent leveling.

• Dries bright for areas where buffing is not applicable or desired.

• Excellent buffing response for spray-buffing repairs or high-speed burnishing programs (up to 2,000 rpm).

• Readily strippable.

• Meets the ASTM D2047 standard for slip resistance on dry floors.

• pH of 8.5 - 8.75.

Shelf Life: One year if not opened. Keep from freezing.

Available Units: Gallon - 4 gal/ctn; 5 Gallon

VOC: VOC Content: 0%; as required by California General Consumer Products Rule, California Code of Regulations

STORAGE: Keep from freezing.

MSDS

Refer to the Material Safety Data Sheet for additional product information.

ORDER & WAREHOUSE INFORMATION

Language English/Spanish English/French

Size 1 gallon 5 gallons

1 gallon (3.78L) 5 gallons (18.9L)

Item No. 1 gallon - 00480408 5 gallons - 00480508

1 gallon - S-480601 5 gallons - S-480603

Item UPC 1 gallon - 042369059503 (ctn)

042369159500 (bottle) 5 gallons - 042369059534

1 gallon - 10042369159866 (ctn) 042369159869 (bottle)

5 gallons - NA https://armstrongflooring.my.site.com/ArmstrongConnect/s/article/S-480-Commercial-Floor-Polish-MSDS

Carton Dimensions

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H

1 gallon - 16"L x 11"W x 14"H 5 gallons - 12.5"L x 12.5"W x

14.75"H

Carton Weight 1 gallon - 37.09 lbs 5 gallons - 45.56

1 gallon - 37.09 lbs (16.3 kg/ctn) 5 gallons - 45.5 (21.3 kg)

Items per Carton 1 gallon - 4

5 gallons - Containers sold individually

1 gallon - 4 5 gallons - Containers sold individually Cartons per Pallet

1 gallon - 40 5 gallons - 36

1 gallon - 40 5 gallons - 36

DIRECTIONS FOR USE

FLOOR PREP:

Sweep or vacuum thoroughly Wash with S-485 Armstrong Floor Cleaner Rinse thoroughly Let floor dry

POLISH - LOW TRAFFIC:

Apply 3 to 5 coats (do not apply more than four coats of polish at one time; wait a minimum of 24 hours before applying more polish) Pour polish into a clean bucket (never pour polish directly onto floor) Use a clean finish mop (rayon) or finish applicator Let dry 30 minutes between coats

POLISH - HIGH TRAFFIC:

Follow instructions above for Low Traffic; then High speed burnish

OR

Spray buff (spray-buff solution one part S-480 to two parts water)

OR

Apply 1 or 2 extra coats

Water heater details:

CHRONOMITE LABS Electric Tankless Water Heater: Indoor, 6,240 W, 2 gpm Max. Flow Rate

Item 10G725

Mfr. Model

SR-30/208 HTR-I

Product Details Catalog Page

Brand

CHRONOMITE LABS

Manufacturer Part Number

SR-30/208 HTR-I

Current

30 A https://www.grainger.com/content/general-catalog?pagelabel=2713&search=10G725

Operating Voltage

208V AC

Minimum Flow Activation

0.65 gpm

Adjustable Thermostat No

Environment Indoor

Mounting Orientation Horizontal

Maximum Delivered Temperature 160 °F

Cold Inlet Size 3/8 in

Hot Outlet Size 3/8 in

Overall Depth

2.75 in

Overall Height

6.25 in

Overall Width

9.63 in

Power Consumption 6,240 W

Standards ADA Compliant; cETLus Listed; CSA Certified; IAPMO; UL Listed; UPC

Temperature Rise @ Flow 28°F @ 1.50 gpm; 34°F @ 1.25 gpm; 43°F @ 1 gpm

Maximum Water Pressure 80 psi

Market Commercial; Residential

Application Bar Sinks; Kitchen; Lavatory; Residential; Scrub Sinks; Service Sinks; Showers

Maximum Flow Rate 2 gpm

Housing Material Aluminum

Phase Single

Minimum Delivered Temperature 140 °F

Hot Outlet Type Compression

Cold Inlet Type Compression

Element Material Celcon Plastic

Minimum Water Pressure 25 psi

Includes Compression Fittings; Faucet Flow Control

Mounting Type Wall Mounting

Cord Conductor Gauge 10 AWG Wire

UNSPSC

40101825

Country of Origin Mexico (subject to change)