Attachment 2 - Specifications - IMAGING TABLES.docx

This is a specifications document for an Integrated Headrest Imaging Table required by the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 19 for the Cheyenne VAMC Pain Management Program (Solicitation Number 36C25926Q0798).

The table must be a powered 4-motion imaging table designed to support fluoroscopy-guided pain management and interventional procedures, featuring a 22" × 84" radiolucent carbon fiber top with 56" metal-free imaging space for C-arm accessibility. Required powered movements include electric height adjustment (26"-43" without pad), Trendelenburg tilt (±15°/±11°), 10-inch longitudinal travel, and ±15° lateral tilt, controlled via multifunction hand control and optional foot control for height adjustment. The table must accommodate a 500-pound patient weight capacity, weigh approximately 475 pounds, include 4" or 5" locking casters suitable for mobile use, and come with a 2" radiolucent comfort foam pad, crescent face rest pad, and two patient safety straps. All equipment must be FDA-listed as a Class II medical device, CE-marked, cETLus-approved with CB Certificate compliance, and manufactured in an ISO 13485-certified facility meeting IEC/EN 60601-1, IEC/EN 60601-1-2, IEC/EN 60601-2-32, and ANSI/AAMI ES60601-1 electrical safety standards. The vendor must provide a four-year warranty on frame, understructure, upholstery, and padding, plus three-year parts and one-year labor warranty for electrical and moving components.