Not Sensitive

Specifications Table of Contents Specification for Gas Chromatograph-Mass Spectrometer (GC-MS)

Specification for Transmission Electron Microscope (TEM)

Specification for IPLEX One Borescope 2.2, 4, & 6 mm Insertion Tubes

Specification for Creaform 3D Corrosion Scanner

Specification for a Digital Microscope

Specification for a Digital Surface Profilometer

Specification for a 300kN Tensile Tester

Specification for a Portable Residual Stress Analyzer

Specification for Gas Chromatograph-Electron Capture Detector (GC-ECD)

Specification for Gas Chromatograph-Flame Ionization Detector (GC-FID)

Specification for Atomx XYZ Automated VOC Sample Prep System

Specification for a Handheld XRF Analyzer

Specification for a Vickers/Knoop Hardness Tester

Specification for Gas Chromatograph-Mass Spectrometer (GC-MS) at Arnold Air Force Base, TN

Arnold Engineering Development Complex (AEDC)

Provide all materials, labor, and equipment necessary to provide a new fully functional Gas

Chromatograph-Mass Spectrometer. Refurbished or remanufactured parts are not authorized for this requirement.

1) Gas Chromatograph-Mass Spectrometer with the following features and accessories:

• GC Oven Temperature range of ambient +4 to 450℃

• Mass Selective Detector interface

• 120 C/min GC Oven Ramp

• Two 100 psi Split/splitless inlet

• Electronic Pneumatic Control (EPC)

• Helium, Hydrogen, and Nitrogen carrier gas capability

• Constant flow, constant pressure, programmable flow and programmable pressure carrier gas control modes

• Capillary flow device controller compatible

• Retention-Time Locking

• Turn top inlet sealing system

• Ion source glass window

• Removable source

• Inert Plus Mass Selective Detector (MSD) Turbo El Bundle

• Triple-axis detector with high energy dynode and long-life electron multiplier (EM)

• Mass range 1.6 to 1050

• Scan speed up to 20,000 u/sec

• 255 L/s turbo pump with 2.5 m3/hr mechanical pump

2) Software, OpenLab CDS Workstation PC Bundle including PC with 8GB, 2 connections, 1 year Software Maintenance Agreement

3) Exhaust Deflector Assembly

4) NIST MS Library Bundle with over 350K El spectra for over 300K compounds and GC

Methods/Retention indices library with 139K compounds

5) Installation, Calibration, Training and Warranty

Specification for Transmission Electron Microscope (TEM)

Provide all materials, labor, and equipment necessary to provide a new fully functional

Transmission Electron Microscope (TEM). Refurbished or remanufactured parts are not authorized for this requirement.

1) Transmission Electron Microscope (TEM) with the following features and accessories:

• Dual-mode objective lens

• Allow accelerating voltage ranging from 20 kV to a max of 120 kV

• 0.14 nm @120 kV (off-axis) lattice resolution

• Magnification of x50-x800,000

• ±30° tilt angle sample holder

• Transition from HC and HR modes by switching only the polarity of the coil

• Includes a variety of automated functional tools such as Image Navigation and Nano

Analysis

• Compatible with Hitachi RC16 16-mega pixel CMOS camera

2) STEM (BF/DF) unit 60 HZ

3) 5-Axis motorized Goniometer Stage

4) Traditional Cold Finger

5) SA Aperture Assembly

6) Beam Stopper for Diffraction

7) Nano-Analysis Function

8) Diffraction Analysis Software

9) EMIP Key

10) Three Specimen One Touch Single Tilt Holder

11) One Touch 3-Specimen Holder for EDX

12) Double Tilt Holder

13) Nanosprint 15 Direct-Mounted 15 MP CMOS Camera

14) Oxford-Xplore EDS

15) X-ray Analysis Holder

16) Air-Cooled Water Recirculator

17) Dry pump and pump enclosure

18) Installation, Calibration, Training and Warranty

Specification for IPLEX One Borescope 2.2, 4, & 6 mm Insertion Tubes

Provide all materials, labor, equipment, and user training necessary to provide a new fully functional IPLEX One System. Refurbished or remanufactured parts are not authorized for this requirement.

Specifications:

1) IPLEX One Prime Kit with the following features and capabilities:

− IPLEX One System with Workstation Case

− IPLEX One Wireless Remote Control

− IPLEX One Base Battery Charger

− IPLEX One Operation Unit Battery Charger - with AC / USB-C Adapter

− 3 AC CABLES

− IPLEX One Plus Software

− IPLEX One Plus to Expert Upgrade

− IPLEX One Expert to Prime Upgrade

− 2 IPLEX One Operation Unit Batteries

− 2 IPLEX Base Unit Batteries

− TL-WN725N Wireless USB Dongle

− IPLEX One Spare Scope Case

2) IV10212TF (Flex) System: Including the ultra-thin 2.2mm Flexible Scope with 120-degree field of view, protective braid for increased durability, TXII Control Unit that allows interchangeable scope capability, and TXII software that provides improved image and saturation adjustment capability.

− IV10200T Control Unit – N4165600

− IV10212TF TXII Flexible Unit – N4165700

− TXII Software Keycode for Activation – N4166200

− TXII Protective Braid – N4166000

3) IPLEX One Scope Unit with 1 to 1 matched Direct and Side Swoptix 3D Measurement Tip

IV10435-SMDS

4) IV10 Swoptix Multiview Tip Adapter AT110DN/F-IV104

5) IV10 Swoptix 3D Measurement Tip Adapter AT100DD-IV104

6) IV10 Swoptix Multiview Tip Adapter AT100D/S-IV104

7) IV10 Swoptix 3D Measurement Tip Adapter AT80SS-IV104

8) IV10 Tip Adapter AT120S/FF-IV104

9) IPLEX One Scope Unit with 1 to 1 matched Direct and Side Swoptix 3D Measurement Tip

IV10675-SMDS

10) IV10 Swoptix Multiview Tip Adapter AT110DN/F-IV106

11) IV10 Swoptix Multiview Tip Adapter AT100D/S-IV106

12) IV10 Swoptix 3D Measurement Tip Adapter AT120DD-IV106

13) IV10 Swoptix 3D Measurement Tip Adapter AT100SS-IV106

14) IV10 Tip Adapter AT120D/FF-IV106

15) IV10 Tip Adapter AT120S/FF-IV106

16) IPLEX One UV Light Source

17) IPLEX One UV Capable Scope Unit IV10675UV

18) IV10 Measurement Check Tool 4mm

19) IV10 Measurement Check Tool 6mm

20) IPLEX One Spare Scope Case

21) Operation Unit Case Attachment Bracket

22) IV10 Tip Adapter AT120D/FF-IV104

23) Warranty

− 1 Year Warranty

Specification for Creaform 3D Corrosion Scanner

Provide all materials, labor, equipment, and training necessary to provide a new fully functional

Creaform 3D Corrosion Scanner with VXintegrity. Refurbished or remanufactured parts are not

4) Handy Scan Black Elite:

− Handheld self-positioning laser scanner system

− Scanner unit

− Creaform OS software

− Carrying case

− 4 meters custom USB cable

− Power supply

− Calibration plate

− 2,000 reflective targets

5) VXintegrity – Surface damage

− NDT 3D software

− Automatic report generation w/Excel grid export

− Digitized surface thickness loss mapping

6) Reference Arrow

− Positioning reference artifact w/auto positioning

7) Dell 7680 Premium – English

− Intel Core i7-13850HX (20 Cores / 3.8GHz / 5.3GHz)

− NVIDIA GeForce RTX 4090 16GB

− Windows 11 Pro 64bits

− 16" FHD+ 1920x1200 WLED

− RAM 64GB

− 2x32GB 5200MT/s

− 1TB M.2 PCIe NVMe Gen 4 2280 SSD

8) 360 Magnetic Target Kit (6 mm)

− 39 High-reflective magnetic targets

− Protective case

9) Portable Workstation

− Custom carrying case w/foam

− All-terrain wheels

− Mobile desk

10) On-site Training for Three (3) Technicians, Four (4) Days

11) Warranty

− 1 Year parts and labor

− 3 Year accident coverage

Specification for a Digital Microscope

Provide all materials, training, and equipment necessary for a new fully functional Digital

Microscope. Refurbished or remanufactured parts are not authorized for this requirement.

12) Digital Microscope with the following features and capabilities:

− High resolution lens that goes from 5x to 6000x magnification.

− Free angle observation system with XY motorized stage

− Low and mid magnification diffuser adapters.

− Coaxial polarizing filter sets.

− Integrated laser-based elemental analyzer (LIBS)

− 3D Profile measurement capabilities

− LCD monitor with at least 27” screen size

− Control console for ease of use.

13) Warranty

− 5 Year Extended Warranty

Specification for a Digital Surface Profilometer

Provide all materials, training, and equipment necessary for a new fully functional Digital 3D

Surface Profilometer. Refurbished or remanufactured parts are not authorized for this

14) Digital 3D Surface Profilometer with the following features and capabilities:

− Sub-nanometer resolution capabilities with white light interferometry

− Laser confocal capabilities for high magnification scanning with a violet laser

− Ability to use focus variation for larger changes in measurement height

− XY motorized stage with the ability to tilt

− Image stitching software

− Objective lenses from 2.5x to 150x magnification

− Compliant with ISO 25178 and ISO 21920

15) Warranty

− 5 Year Extended Warranty

Specification for a 300kN Tensile Tester

Provide all materials, training, and equipment necessary for a new fully functional Tensile Test

System. Refurbished or remanufactured parts are not authorized for this requirement.

16) Tensile Testing System with the following features and capabilities:

− Load cell with force capacity of 300kN.

− Additional load cell with force capacity of 30kN for low strength materials.

− 3 phase 240V connection

− Auto-contracting contact extensometer.

− Series B bolt holders for static tensile testing of fasteners up to 1 in

− Crack opening displacement gauges

− Metals application module

− Testing speed range from .000004 in/min to 20 in/min.

− Control console for ease of use.

17) Warranty

− 10 year mechanical systems warranty

− Installation and training included for operators

Specification for a Portable Residual Stress Analyzer

Provide all materials, training, and equipment necessary for a new fully functional portable residual stress analyzer. Refurbished or remanufactured parts are not authorized for this

18) Portable residual stress analyzer with the following features and capabilities:

− Steel shielding box for safe operation.

− 40 seconds per point measurement time in ferritic specimens

− Chromium x-ray tube with collimators.

− Manganese x-ray tube with collimators.

− Flexible arm and tripod with angle gauge.

− Ability to measure retained austenite.

− Sample preparation stage.

19) Warranty

− 1 year warranty

− Installation and training

Specification for Gas Chromatograph-Electron Capture Detector (GC-ECD)

Chromatograph-Electron Capture Detector (GC-ECD). Refurbished or remanufactured parts are not authorized for this requirement.

1) Gas Chromatograph-Electron Capture Detector (GC_ECD) with the following features and accessories:

• GC Oven Temperature range of ambient +4 to 450℃

• Oven accommodates up to two 105m x 0.530 mm id capillary columns or two 10 ft glass packed columns or two 20 ft stainless steel packed columns

• Oven temperature setpoint resolution of 0.1 ℃

• Supports 20 oven ramps with 21 plateaus

• Maximum achievable temperature ramp rate of 120 ℃/min

• Oven cool down 450 to 50 ℃ in 4 minutes

• Electronic Pneumatics Control (EPC) with pressure control of ±0.001 psi

• Two split/splitless inlets installed

• Two Electron Capture Detectors (ECDs) with data acquisition rate of up to 500 Hz

• ECD minimum detection level of <3.8 fg/mL Lindane at standard conditions, Linear dynamic range >5x104 with Lindane, 400oC max operating temperature.

4) Autoinjector including transfer turret, 16-sample turret, mounting post, parking post for GC.

10 ul syringe, solvent bottles, and 150 vial tray with three removable.

Specification for Gas Chromatograph-Flame Ionization Detector (GC-FID)

Chromatograph-Flame Ionization Detector (GC-FID). Refurbished or remanufactured parts are not authorized for this requirement.

1) Gas Chromatograph-Flame Ionization Detector (GC-FID) with the following features and

• GC Oven Temperature range of ambient +4 to 450℃

• Oven accommodates up to two 105m x 0.530 mm id capillary columns or two 10 ft glass packed columns or two 20 ft stainless steel packed columns

• Oven temperature setpoint resolution of 0.1 ℃

• Supports 20 oven ramps with 21 plateaus

• Maximum achievable temperature ramp rate of 120 ℃/min

• Oven cool down 450 to 50 ℃ in 4 minutes

• Electronic Pneumatics Control (EPC) with pressure control of ±0.001 psi

• Two 100 psi split/splitless inlets installed

• Two Capillary Flame Ionization Detectors (FIDs) with minimum detectable level for tridecan of <1.2 pg C/s, Linear dynamic range of >107, Data rates up to 1,000 Hz accommodating peaks as narrow as 5 msec at half height, flame detection and automatic reignition, 450 ℃ max operating temperature

4) Autoinjector including transfer turret, 16-sample turret, mounting post, parking post for GC.

10 ul syringe, and solvent bottle and 150 vial tray including three removable

Specification for Atomx XYZ Automated VOC Sample Prep System

Provide all materials, labor, and equipment necessary to provide a new fully functional Atomx

XYZ Automated VOC Sample Prep System. Refurbished or remanufactured parts are not

1) Atomx XYZ Automated VOC Sample Prep System with the following features and

• Single Platform System combining the concentrator and soils/water autosampler

• Sample tray with 84 positions for nominal 40 mL capacity, single hole cap with PTFE-face silicone septum per EPA specifications

• 25 mL sample syringe capable of dispensing variable volumes of water in 0.1 mL increments

• PEEK tubing for liquid transfer

• Electronic MFC Gas handling capable of flow rates between 5-500 mL/min variable between each mode of operation

• Purge pressure monitoring

• Three standard injection systems utilizing 2-way dosing valves mounted on internal valve manifold with 1,2,5,10, and 20 µL increments

• Three 15 mL standard vessels

• Capable of operation with 5-25 mL frit or fritless sparge vessels

• Programmable automatic aqueous sample dilutions

• Total Purge & Trap cycle time of 18 minutes or less

• Vial heater capable of variable heat control from ambient to 90 ℃

• Capable of fully automated methanol extraction of high concentration soil samples

• Automated system leak check capability

2) Software, Atomx XYZ Teklink software

5) Installation, Calibration, any Necessary Training and Warranty

Specification for a Handheld XRF Analyzer

Provide all materials, training, and equipment necessary for a new fully functional handheld

XRF Analyzer. Refurbished or remanufactured parts are not authorized for this requirement.

20) Handheld XRF Analyzer with the following features and capabilities:

− Software modules for the composition of alloys, rock, soil, coatings and lead paint.

− Rhodium anode

− 50 kV X-ray tube

− Large are silicon drift detector

− 3 mm X-ray spot collimator

− Sample camera for documenting tests

− 2 batteries with battery hot swap capability

− Battery charger

− Spare analysis windows

21) Warranty

− 3 year warranty on the analyzer

− 5 year warranty on the x-ray tube

Specification for a Vickers/Knoop Hardness Tester

Provide all materials, training, and equipment necessary for a new fully functional

Vickers/Knoop hardness tester. Refurbished or remanufactured parts are not authorized for this

22) Vickers/Knoop hardness tester with the following features and capabilities:

− Fully automatic system with micro and macro ranges

− Closed loop load cell force control and precision optical measurement

− Load range from 0.05 to 10 kgf

− Vickers scales of HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2, HV3, HV5, HV10, HV20, HV30, and HV50.

− Knoop scales of HK0.01, HK0.025, HK0.1, HK0.2, HK0.3, HK0.5, and HK1

− 10x and 50x working distance measurement objectives and overview camera with stitching

− Included control software and automatic XY-stage

− Stage size at least 300 x 180mm

− Automatic focus and illumination

− Vertical test capacity of at least 155mm

− Image analysis with automatic hardness measurement

− On-board hardness conversions

− Graphical pattern editor with pattern video overlay

− Color mapping function that converts hardness values into color maps

− K1c fracture toughness testing capability

− 10N, 100N, and 500N load cells

− T-slot table

− Sample holder for 1.25” mounted specimen

− Ball testing anvil and eyeball anvil

− 5x, 20x, 50x, and 100x LWD objectives included

23) Warranty

− 1 year warranty or mor