Attachment 2 - Salient Characteristics.pdf
PDF 304 KB Posted
- Attached to
- Equipment for Tactical EMSO Kits
- Solicitation number
- A037945
About this file
This document is an attachment titled "Attachment 2 - Salient Characteristics" that describes the required specifications for electromagnetic spectrum operations (EMSO) kits needed to support tactical operations in Eastern Europe. The EMSO kits must be compatible with NIPR-approved RFeye/Mission Manager software using VITA 49 protocols and include a single-channel receiver with switchable RF inputs, a frequency range of 9 kHz to 18 GHz, a 100 MHz instantaneous bandwidth, 1 Hz tuning resolution, and programmable sweep modes. The kits require an Intel E3845 quad-core processor, network and USB connectivity, and environmental specifications for operating temperature, storage temperature, and ingress protection. This requirement is in support of a pre-solicitation for "Equipment for Tactical EMSO Kits" by the U.S. Air Force to provide RFeye nodes, antennas, software, and other equipment for 1 CMXS at Ramstein Air Base, Germany.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 - Salient Characteristics_Updated 7 June 2024.pdf | ||
| SSN EMSO kits.pdf | ||
| MR Questionnaire EMSO Kits.pdf | ||
| Attachment 1 - LOM 5 June 24.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2 – Salient Characteristics
Salient Characteristics
1. 1CMXS requires tactical electromagnetic spectrum operations (EMSO) kits to deploy Electromagnetic Spectrum support capabilities to sites across Eastern Europe. This requirement is an urgent requirement due to current Eastern European Response operations and the equipment must be compatible with NIPR approved RFeye/Mission manger software using VITA 49 protocols.
2. The EMSO kit specifications required are as follows:
a) Single channel receiver
b) Switchable RF inputs 3 x SMA connectors
c) Frequency
d) Range 9 kHz to 18 GHz
e) Signal analysis
f) Instantaneous bandwidth 100 MHz
g) Tuning resolution 1 Hz
h) Internal frequency reference
i) Initial accuracy @20°C ±0.1 ppm typ.
j) Stability over temperature ±0.3 ppm
k) Ageing over 1 day ±0.04 ppm
l) Programmable sweep modes
m) Sweep speed at 2 MHz RBW 390 GHz/s typ.
n) Sweep speed at 61 kHz RBW 320 GHz/s typ.
o) User programmable modes free run continuous, single timed, user trigger, adaptive
p) Trigger-on-event modes user defined masks, actions alarms
q) Sampling
r) Resolution 16 bits per channel (I&Q)
s) Rate 125 MS/s I&Q
t) Frequency references
u) Selectable Internal, GPS or external
v) External input 10 MHz ±10 ppm
w) GPS holdover (option) Sync Backup Module
x) ± 1.5µs / 8hrs.
y) Processor sub-system
z) CPU Intel E3845 quad core aa)I/O
bb) Network 1 x 1 GigE, with POnE
cc) Universal Serial Bus 1 x USB3.0, 1 x USB2.0
dd) 2 x expansion ports 2 x SyncLinc with < 10 ns
ee) configurable as: RMS accuracy typical, trigger input, external peripheral control
ff) GPS antenna input 1 x SMA passive or active (3.3 VDC) gg)Environmental
hh) Operating temperature -30 to +50 °C (-22 to 122 °F)
ii) Storage temperature -40 to +71 °C (-40 to 160°F)
jj) Ingress protection IP67 (with optional end plates)
kk) Power consumption( needed low) Typical 40 W Maximum 55
ll) 120v/220v and 12 V power capabilities
File details come from the government source that posted it. Updated .