Attachment 2 - Salient Characteristics - ACE Kits.docx

ACE KITS

REQUIREMENT DESCRIPTION WITH SALIENT CHARACTERISTICS

1. GPS Wrist Navigator: Must be black in color. Must be durable, constructed to military standards (MIL-STD-810G); night vision goggle compatible. Must work with GPS, GLONASS and Galileo satellite systems to provide accurate positioning. Must have navigation sensors, including 3-axis accelerometer, 3-axis compass and a barometric altimeter; smart notifications allow device to receive emails, texts and alerts. Must have a battery life that exceeds 48 hours in navigation mode, up to 1 week in ultra-tracking mode and up to 1 month in watch mode.

Quantity is as follows: 260 ea.

2. Rifle Case: Must be black in color. Dimensions must be as follows: Interior (L×W×D) 44.00 x 14.00 x 6.00 in (111.8 x 35.6 x 15.2 cm) and Exterior (L×W×D) 47.20 x 16.50 x 6.70 in (119.9 x 41.9 x 17 cm). Must have two pad lockable hasps with the padlock hole diameter of 3/8" (10 mm). Must have foam material of 1.3/1.35 polyester. Must be lightweight strong with HPX resin and two double-layered, soft grip handles. Must have six press and pull latches and hinges.

Quantity is as follows: 260 ea.

3. Wheeled Deployment Bag: Must be in OCP/Multi cam pattern. Must have a product size of 17" H x 36" W x 17" D. Must have 420 denier ripstop nylon & 1680 denier nylon construction with a padded exterior. Must have zip-off side organizer bag with handle and reinforced carry handles. Must have heavy-duty tractor wheels and protective corner guards and feet/skids. Must have a large main compartment with padded divider and interior zippered mesh pocket.

Quantity is as follows: 260 ea.

4. Combat Helmet Flashlight: Must be tan in color. Must have 3 Ultrabright LEDs with a light output of 55 Lumens with dimmable specialty light configurations. Must offer a clean white flood light for distance spotting or large area lighting and a lower lumen light output for close at hand administrative tasks. Burn time must be 40 hours and batteries must be CR123 Lithium. Must have flexi-neck design and be water resistant. Must be compatible with AS-501 Gen 2 helmet rail system.

Quantity is as follows: 260 ea.

5. Stanchions: Must be 42” (47” with handle) in height and post diameter of 4”. Must be bright orange in color with flanged bottom for rubber base. Must have 3” white reflective tape.

Quantity is as follows: 200 ea.

6. Laser Rangefinder: Must be black in color. Must have four targeting modes, (Normal Mode, First Mode, Last Mode and Extended Mode) for any range environment. Must have horizontal component distance capability for angle compensation. Must have 7x magnification. Must be 4.4” x 1.7” (L x W) and weigh below 10 oz.

Quantity is as follows: 20

7. Rope: Must be red in color, 3/8” and 600’, polypropylene red rope spool.

Quantity is as follows: 50 ea.