Attachment 2 - LTS Appendix C.pdf

File Number: F3Q3AH2145AW01 Prepared By: 78 ABW/SEG 1

Safety Appendix (formerly Appendix C)

Environmental, Safety and Occupational Health Requirements for:

PR/Contract/Project#: F3Q3AH2145AW01

Date: 26 May 2022

Type Work: Local Telecommunications Services, Robins AFB

PART I

Instructions: The contractor Safety and Health Plan (required IAW AFI 91-202, The US Air Force Mishap Prevention Program) shall address in detail the items listed in Parts II and III, as applicable. Repeating the referenced standard without addressing the company’s specific processes or procedures will not suffice. If task specific procedures are incorporated into a company local document, those procedures must be attached to the submitted Safety and Health Plan. Referencing the company's local procedure/document in the Safety and Health Plan is not adequate. If the company's local procedure/document is not attached, the submitted Safety Plan will be returned unacceptable.

PART II

1. Environmental, Safety, And Occupational Health (ESOH): The contractor is solely responsible for compliance with all federal, state and local laws, the Occupational, Safety and Health Act (Public Law 91-596) and the resulting OSHA standards, 29 CFR 1910 and 1926, as applicable, and the protection of their employees. Additionally, the contractor is responsible for the safety and health of all subcontractor employees. The contractor must comply with all Federal, State, Air Force, Department of Defense, and Robins Air Force Base permits, laws, and requirements outlined in the Civil Engineering Specifications, 01560 - Environmental Requirements.

2. Voluntary Protection Programs (VPP): The Air Force is part of OSHA’s VPP. All contractors are required to familiarize themselves with the requirements of VPP. Information on VPP can be accessed at http://www.osha.gov. The intent of the Air Force Safety Program is to prevent injuries and to communicate our safety expectations with potential offerors as well as those contractors awarded a government contract. The Air Force’s interest is to protect personnel working in or around contractor operations, and to protect Air Force equipment/property.

3. Contractor Employees: Compliance with OSHA and other applicable laws and regulations for the protection of contractor employees is exclusively the obligation of the contractor. Note:

The Air Force Occupational Safety, Fire and Health Standards (DAFMAN 91-203) is frequently annotated because many of the Air Force standards exceed the OSHA standard criteria. If a conflict is noted, the most stringent requirement takes precedence. The government shall assume http://www.osha.gov/pls/oshaweb/owasrch.search_form?p_doc_type=STANDARDS&p_toc_level=0

Prepared By: 78 ABW/SEG 2 no liability or responsibility for the contractor's compliance or non-compliance with such requirements. The contractor shall furnish to each of his/her employees a place of employment, which is free from recognized hazards. The contractor shall brief his/her employees on the safety requirements of this contract and on hazards associated with prescribed tasks. The contractor is responsible for compliance with OSHA Public Law and the resultant standards identified within. In addition, the contractor is required to flow down the safety requirements/specification to all subcontractors. This applies to Federal Acquisition Regulation (FAR) Part 12 commercial acquisitions as well. This contract shall in no way require persons to work in surroundings or under working conditions which are unsafe or dangerous to their health.

The contractor must coordinate and perform work so as not to impact the safety of government employees or cause damage to government property. This requires providing personnel with protective equipment and associated safety equipment as may be necessary. The contractor must also protect personnel from hazards generated by the work. If the contractor employs bilingual speaking employees, they must post bilingual signs and have written procedures for specific tasks in applicable languages.

4. Inspections: Air Force Environmental, Safety, Occupational Health and Fire protection officials or responsible Quality Assurance Evaluator (QAE) may periodically enter a contractor’s workplace to verify working conditions of Air Force personnel. If an Air Force employee observes improper procedures or unsafe conditions exits which place Air Force personnel or equipment/facilities in jeopardy, the contractor will remove personnel and/or equipment from the unsafe condition and immediately notify the Contracting Officer and the Installation Safety Office. Department of Labor (DoL), Regulatory inspectors are authorized right of entry to inspect any place of employment operated by an Air Force contractor. They can be considered “no notice” inspections. Note: Notify the Installation Safety Office at (478)-926-6271 if an OSHA inspector visits your site unescorted by an Air Force Safety Technician. Notify the Installation Environmental Office at (478)-327-8104 if an environmental inspector visits your site unescorted by 78 CEG/CEIE Environmental Personnel. Noncompliance with ESOH requirements can result in work stoppage, inexcusable delays, and/or costly fines issued by the Regulator. The government shall assume no liability or responsibility for the contractor's compliance or non-compliance with such requirements. Fines and additional costs for violations levied against the contractor as a result of OSHA findings, and/or installation safety, fire, health or environmental are the sole responsibility of the contractor and shall not be passed through to the Government.

5. Mishap Notification: The contractor shall notify the Installation Safety Office telephonically at (478)-926-6271 during duty hours and (478)-327-2612 after hours, within four (4) hour after initial notification of all mishaps or incidents for damage to DoD property (material plus labor) entrusted by this contract and employee injuries as a result of the contract operation. A follow-up (written or e-mail) of this mishap/incident notification shall be sent within three calendar days to the Government Representative, the Procurement Contracting Officer (PCO) or the Administrative Contracting Officer (ACO) (with a copy to program manager), who will forward it to the Installation Safety Office. The information that is not available at the time of the initial notification shall be provided within 20 calendar days after the mishap. Mishap notification shall contain, as a minimum, the following information:

Prepared By: 78 ABW/SEG 3

a. Contract, Contract Number, Name and Title of Person(s) Reporting

b. Date, Time and exact location of accident/incident

c. Brief Narrative of accident/incident (Events leading to accident/incident)

d. Cause of accident/incident, if known

e. Estimated cost of accident/incident (material and labor to repair/replace)

f. Impound Authority Name and Phone Number (as applicable)

g. Nomenclature of equipment and personnel involved in accident/incident

h. Corrective actions (taken or proposed)

i. Other pertinent information

Note: If requested by Government Personnel (PCO/ACO), the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by the investigating safety office. If the government investigates the mishap, the contractor and the subcontractors shall cooperate fully and assist the government personnel until the investigation is finalized and closed out.

6. Impoundment Procedures: The contractor shall establish written impoundment procedures, as part of their Safety and Health Plan. Impound data must be included in the Mishap Notification Procedures as applicable. As a minimum, the procedures must address:

a. Appointment of Impound Authority in writing (copy faxed to QAP and Safety Office)

b. Impound Authority e-mail address and phone numbers

c. Specific instructions (cordon, facility locked facility, etc.) to secure the site or government asset, to prevent tampering with the aircraft, site or government assets

d. Specific instructions or measures to ensure only authorized personnel directly involved in management, SAFING, troubleshooting, or repair of aircraft or equipment gain access to the impound site

e. Additional guidance is located within AFI 21-101, AFMC Supplement 1

7. Contractor Safety and Health Program: The contractor shall establish and maintain an acceptable safety and health program.

a. Contractor Safety and Health Manager. As part of the Contractor Safety and Health Program, the contractor shall assign in their plan, by name and phone number, a person who will be the primary point of contact for safety and health issues for the on-site operation.

b. Contractor’s Safety and Health Plan. Contractor shall prepare a safety and health plan (SHP) in accordance with PART I, PART II, and PART III, incorporating the listed elements in PART II and addressing in detail, as applicable, the items below in PART III of this Appendix. The SHP must be accepted by the government and will be incorporated into the awarded contract. Should a master SHP remain on file with the Installation Safety Office, the contractor must ensure that it is current, updated, and includes all elements below. An addendum to the SHP must include the processes noted below:

Prepared By: 78 ABW/SEG 4

(1) Changes to the Plan. If, during the performance of this contract, changes to the contractor’s SHP are required, the contractor shall submit a revised SHP to the

Contracting Monitor and/or Contracting Officer’s Representative (COR). The same process of review and negotiation (if applicable) involved in the original submission applies to any revision submitted after contract award. The accepted revised SHP shall then be incorporated by contract modification as an attachment or by reference.

(2) Tracking Rates. The Contractor’s SHP shall identify how their Total Case

Incident Rate (TCIR) and Days Away, Restricted and/or Transferred (DART) rates, or comparable insurance rates or compensation injury rates will be tracked, and the corrective measures to be used if these rates begin to decline. The contractor must also describe the processes and procedures to be used to track their compliance with their SHP and how they will correct any deviations from the plan, when and if identified.

PART III

The following items represent a list of required elements, as applicable, for the performance of this contract. The contractor’s SHP shall address how compliance with these requirements will be ensured. The SHP shall clearly define company procedures on specific tasks/processes, personnel qualifications, how facilities comply with fire requirements to include the electrical wiring and fire protection systems installed (i.e., fire suppression, fire detection, fire extinguishers, firewall ratings, etc.), required equipment used to accomplish tasks and other necessary requirements to ensure the protection of government personnel and property. The contractor’s SHP shall meet, but may exceed the referenced standards.

1. Pedestrian Crosswalks: All contractor personnel are required to use the closest crosswalk, or traffic controlled intersection when crossing the road. Pedestrians must look both ways to ensure the coast is clear before stepping out into the crosswalk. Pedestrians do not have the right of way unless they are already in the crosswalk. Contractor vehicle operators have the same responsibilities as pedestrians, to share the road and mutually observe and yield to pedestrians.

2. Motor Vehicles: Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 32, DoD Directive 5525.04, Enforcement of State Traffic Laws on DoD Installations," *, paragraphs 3-4; DoDI 6055.04, DoD Traffic Safety Program, *, AFI 91-207, USAF Traffic Safety Program, *, and AFI 91-207, AFMC Supp 1, *. Each applies to all persons at any time on an Air Force installation and includes all leased, owned, or privatized property including housing areas. In addition, DAFI 13- 213, Airfield Driving, *, and applicable local guidance applies to all contractors, sub-contractors, vendors, commercial delivery companies, and all other private business vehicles who operate anywhere on an Air Force installation, including the airfield (to include the industrial areas and any buildings or hangars located upon the airfield) in support of their mission. Note: Installation commanders of all DoD installations in the United States and over which the United States has exclusive or concurrent legislative jurisdiction are delegated the authority to establish additional vehicular and pedestrian traffic rules and regulations for their installations. All persons on a http://www.dtic.mil/whs/directives/corres/pdf/605501p.pdf http://www.e-publishing.af.mil/shared/media/epubs/AFI91-207.pdf

Prepared By: 78 ABW/SEG 5 military installation shall comply with locally established vehicular and pedestrian traffic rules and regulations. IAW DoD Directive 5525.04, paragraph 3.4.; a person found guilty of violating, on a military installation, any State vehicular or pedestrian traffic law or local installation vehicular or pedestrian traffic rule or regulation made applicable to the installation under the provisions of this Directive is subject to a fine of not more than $50 or imprisonment for not more than 30 days, or both, for each violation (40 U.S.C., Section 318c (reference d).

3. Housekeeping: Housekeeping shall be conducted according to the requirements in:

DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 2, and 29 CFR 1910.141. Clean as you go will be enforced. Refuse, trash, and debris will be collected daily and not left on site to prevent hazards during high winds and inclement weather.

4. Walking/Working Surfaces: Contractor shall comply with the standards in: DAFMAN 91- 203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 7, 29 CFR 1910, Subpart D, and NFPA 101, Life Safety Code. All interior walking and working surfaces which are part of the means of egress shall remain clear at all times and comply with the requirements of NFPA 101. Floors shall be kept in good condition and free of defects that can endanger workers or interfere with the handling of materials. Housekeeping – methods and controls are in place to minimize tripping hazards, the accumulation of flammable/combustible materials, etc.

Portable metal ladders – methods and controls are in place to ensure inspection and safe use.

Open-sided floors/platforms/runways must be protected and not left uncovered to prevent injury.

5. Personal Protective Equipment: Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 14, 29 CFR 1910.132, 134, 136, Subpart I, and 29 CFR 1926.28, 95, 100, 101, 102 and 951. Personnel protective equipment is required to be worn when employees are exposed to a potential hazard, working overhead, falling objects, etc. Contractor’s SHP shall also address:

- Eye and face protection

- Head protection

- Foot Protection

- Electrical protective equipment

- Hand protection

- Safety harnesses, life lines, and lanyards.

6. Hearing Conservation Program Elements: Contractor shall comply with the standards in:

29 CFR 1910.95 and 29 CFR 1926.52. Note: Noise exposures are based on ACGIH guidelines of 85 dB TWA. Contractor’s SHP shall also address:

- Monitoring (survey of noise producing equipment)

- Audiometric testing

- Hearing Protectors

- Training

- Recordkeeping/Access to information and training material http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10112 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10112 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10118 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10118 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10909 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9735 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10625

Prepared By: 78 ABW/SEG 6

7. Medical and First Aid: Contractor shall comply with the standards in: 29 CFR 1910, Subparts K and Z, and 29 CFR 1926, Subpart C. Contractor’s SHP shall also address:

- Adequate first aid supplies

- Trained employee to render first aid

- Recordkeeping

- Reporting and investigating accidents/incidents

- Off-site physician(s)

- Maintenance of and employee access to exposure monitoring data and medical records

8. Respiratory Protection Program Elements: Contractor shall comply with the standards in:

29 CFR 1910.134 and 29 CFR 1926.134. Respirators are required to be worn if employees are exposed to inhalation hazard. Contractor’s SHP shall also address:

- Training

- Medical evaluation

- Fit tests

- Selection of respiratory equipment

- Storage of respiratory equipment

- Pre-use checks

9. Confined Space Program Elements: Contractor shall comply with the standards in:

DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 23, 29 CFR 1910.120, 146, and 29 CFR 1926.21.A confined space must meet the following three criteria:

(1) is large enough and so configured that an employee can bodily enter and perform assigned work;

(2) has limited or restricted means for entry or exit (for example, tanks, vessels, silos, storage bins, hoppers, vaults, and pits are spaces that may have limited means of entry.);

(3) is not designed for continuous employee occupancy. Examples: underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, and pipelines.

Contractor’s SHP shall address:

- Hazards of confined space

- Permit and non-permit confined spaces

- Responsibilities of management, entry supervisor, authorized entrant, and authorized attendants

- Training requirements

- Permit handling and approval

- Emergency and rescue plans

- Testing and monitoring requirements

- Special hazards

- Posting requirements (applicable to subcontractor operated facilities) http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10122 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10122 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10907 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=12716 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10666 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9797 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9797 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10607

Prepared By: 78 ABW/SEG 7

10. System Modification which Alters Form, Fit or Function: Contractor shall comply with:

Mil Standard 882D, Standard Practice for System Safety, *, and AFI 63-101/20-101, Integrated Life Cycle Management, *, for system modifications, which alter form, fit, or function.

11. Compressed Gas and Compressed Air Equipment: Contractor shall comply with the standards in: 29 CFR 1910.169, Subpart M. Contractor’s SHP shall also address:

- Employee training

- Inspections

- Storage and handling

12. Materials Handling and Storage: All hazardous materials must be approved prior to being brought or used on base. Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 12, 29 CFR 1926.250, 953, 957, 29 CFR 1910.101, Subparts F, H and N, and 29 CFR 1910.178, Powered Industrial Truck.

Contractor’s SHP shall also address:

- Storage and handling of materials

- Disposal of trash from elevations

- Personnel lifting techniques - proper storage to prevent shifting, for stability, etc.

- Rigging (requirements, inspection, components, and qualifications)

- Equipment (use in handling materials)

- Industrial trucks (training, inspection, maintenance, and safe use)

13. Handling, Storage, and Use of Flammable/Combustible Liquids: All hazardous materials must be approved prior to being brought or used on base. Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 22, NFPA 30, Flammable and Combustible Liquids Code, *, NFPA 33 Spray Application Using Flammable or Combustible Materials, *, and DoDI 4140.25, DoD Management Policy for Energy Commodities and Related Services (for petroleum, oil, lubricants storage).

14. Toxic and Hazardous Substances: All hazardous materials must be approved prior to being brought or used on base. Contractor shall comply with the standards in: 29 CFR 1910, Subpart Z, and 29 CFR 1926, Subpart Z. Contractor’s SHP shall also address a section related to working with toxic and hazardous substances, such as asbestos, benzene, lead, styrene and bloodborne pathogens, where the following areas are addressed:

- Threshold limit values (TLV) - exposure monitoring

- Medical surveillance

- Work practices

- Engineering controls

- Respiratory protection

- Protective clothing (PPE) http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10129 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10928 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10928 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10117 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10147 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10147 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10951

Prepared By: 78 ABW/SEG 8

15. Hazardous Communications: Contractor shall comply with the standards in: 29 CFR

1910.1200. Contractor’s SHP shall also address:

- Written program - list of hazardous chemicals

- Identify the hazardous chemical(s) - labeling system

- MSDS data sheet location

- Employee information and training-methods used to inform employees of the hazards, and precautionary measures

16. Hazardous Materials: All hazardous materials must be approved prior to being brought or used on base. Contractor shall comply with the standards in: 29 CFR 1910.120, Subpart H – The Handling and Storing of Hazardous Materials (chemicals, compressed air, acetylene, etc).

When handling the hazardous material the following must be accomplished: compressed gases – training, handling, storage, use, and PPE; flammable and combustible liquids – training, handling, storage use, and PPE. Contractor’s SHP shall also address:

- Training, handling, storage, use and PPE

- Explosives and blasting agents

- Dipping and coating operations

17. Hazardous Waste Operations: Contractor shall comply with the standards in: 29 CFR

1910.120 and 29 CFR 1926.65. Contractor must be certified to complete HAZWOPER Operations. Contractor’s SHP shall also address:

- Emergency response plan

- Personal protective equipment

- Medical surveillance

- Health and safety plan (HASP – required elements have been incorporated)

- Employee training

18. Electrical: Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 8, 29 CFR 1910, Subpart S, 29 CFR 1926, Subpart K, and NFPA 70. All electrical wiring must be IAW National Electrical Code (NEC) 70. Electrical wiring and equipment shall be a type listed by UL or another recognized listing agent. Contractor’s SHP shall also address:

- Selection and use of work practices

- Training (basic electrical safety knowledge)

- Use of equipment (handling, visual inspection, rating of equipment)

- GFCI protection for outside contractor drops and wet/damp areas

- Arc flash

19. Hazardous Energy Control Program Elements (Lockout-Tagout): Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 21, 29 CFR 1910, Subpart S, 29 CFR 1926, Subpart K, and NFPA

70. Contractor’s SHP shall also address:

http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10099 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10099 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10117 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9765 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9765 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10135 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10915 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10915 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10135 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10915

Prepared By: 78 ABW/SEG 9

- Purpose of hazardous energy control program

- Employee training

- Lockout/tagout procedures - removal of locks and tags

- Periodic inspections

- Restoring equipment to normal operations

- Arc flash

- Portable fire extinguishers (proper type, inspection, maintenance, testing, and training)

20. Electronic/Electrostatic Discharge Sensitive Components: An electrostatic discharge program, when applicable, shall be implemented according to: ESD TR20.20, Handbook for the Development of an Electrostatic Discharge Program for the Protection of Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices), *, and T.O. 00- 25-234, General Shop Practice Requirements for the Repair, Maintenance and Test of Electrical Equipment, *, or the commercial standard ANSI/ESD S20.20, Electrostatic Discharge Control Program-Protection of Electrical & Electronic Parts, Assemblies and Equipment, * .

21. Hand and Portable Powered Tools and other Hand-Held Equipment: Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 11, 29 CFR 1910, Subpart P, and 29 CFR 1926, Subpart I.

Contractor’s SHP shall also address:

- Inspection

- Proper use

- Guarding

- Maintenance

- Control of rotating parts, flying chips, and sparks

22. Grounding/Bonding of Aircraft and Avionics Equipment: Contractor shall comply with the standards for grounding and bonding in accordance with T.O. 00-25-172, Ground Servicing of Aircraft and Static Grounding/Bonding, *, for aircraft repair and T.O. 00-25-234, General Shop Practice Requirements for the Repair, Maintenance and Test of Electrical Equipment, *, for avionics equipment.

23. Batteries: Contractor shall comply with the standards for battery servicing in accordance with: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 31, 29 CFR 1910.178, 29 CFR 1910.305 and site specific applicable aircraft T.O.s. Disposal of batteries must be conducted in accordance with 40 CFR 273, Subpart C.

24. Soldering: Soldering shall be conducted in accordance with the requirements in T.O. 00- 25-234, General Shop Practice Requirements for the Repair, Maintenance and Test of Electrical Equipment, *, Chapter 3 and 29 CFR 1910.253.

25. Painting and Paint Removal: Painting and paint removal shall be accomplished according to: T.O. 1-1-8 Application and Removal of Organic Coatings, Aerospace and Non-aerospace http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10132 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10913 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9828 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9882

Prepared By: 78 ABW/SEG

Equipment, *; NFPA 33, Spray Application Using Flammable or Combustible Materials, *, and NFPA 410, Aircraft Maintenance, *.

26. Cleaning/Corrosion Control for Avionics and Electronics: Corrosion removal and treatment shall be conducted according to: T.O. 1-1-691, Cleaning and Corrosion Prevention and Control, Aerospace and Non-Aerospace Equipment, *.

27. Fire Protection For Facilities: Contractor’s procedures shall comply with: DAFMAN 91- 203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 6, NFPA 10, Portable Fire Extinguishers, *, NFPA 13, Installation of Sprinkler Systems, *, NFPA 33, Spray Application Using Flammable or Combustible Materials, *, NFPA 70, National Electrical Code, *, NFPA 72, National Fire Alarm Code, *, NFPA 91, Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids, *, NFPA 409, Aircraft Hangars, *; NFPA 410, Aircraft Maintenance, *, NFPA 418, Fire Protection for Heliports, *, NAS 3306, Facility Requirements for Aircraft Operations, *, and RAFBI 32-2001, Fire Protection Operations and Fire Prevention Program, *, para 2.5.

28. Foreign Object Damage (FOD) Awareness, Prevention And Responsibilities: Contractor shall comply with the standards in: DAFMAN 91-203, Air Force Occupational Safety, Fire and Health Standards, *, Chapter 24, Robins AFBI 21-112, Logistics Maintenance Management, National Aerospace Standard (NAS) 412, Foreign Object Damage/Foreign Object Debris (FOD) Prevention Program, *, and all applicable local guidance. The FOD program must be integrated into the day-to-day operations to reduce/eliminate FOD incidents. Programs will include covering waste dumpsters, waste hauling trucks, barriers in place to stop migrating FOD from dirt and gravel piles, and end of shift or daily clean-up. The contractor will brief their personnel at least weekly on any FOD requirements. All contractors, subcontractors performing maintenance in a FOD–potential area will receive and have documented initial FOD Awareness and Prevention training. For AFMC organizations, Course number CHPMAS0001300 may be used to satisfy this requirement. Subject training will be given during Flight Line Drivers Training by the host Base Operations Flight. Temporary contractors/visitors will be required FOD awareness and prevention training for personnel who, in the performance of their assigned duties, work in or travel through maintenance and flightline areas. To meet the aforementioned requirement, the following Installation FOD training briefing can be found at 78 ABW Safety SharePoint site under Installation FOD/DOP Visitor FOD Briefing. Documentation of training is mandatory.

* denotes current version/edition of stated instruction/standard/technical order, etc.