Attachment_10_SPI.pdf
PDF 360 KB Posted
- Attached to
- Repair of NSN 5950000238464 Coil, Electrical
- Solicitation number
- FA825025Q0512
About this file
This is a Special Packaging Instruction (SPI) document for an electrical coil (NSN 5950-00-023-8464 ZR, Part Number 335D502G01). The document provides detailed technical specifications and assembly instructions for packaging the electrical coil according to military preservation standards MIL-STD-2073, with both serviceable and unserviceable methods specified as Method 10. The packaging requires two levels (A and B) conforming to ASTM D6256, with identical gross cubic feet (15.930) and weight (400 lbs) specifications for both levels.
The document includes detailed engineering drawings and specifications for the packaging assembly, featuring wooden construction requirements that must meet international phytosanitary measures (ISPM No. 15) for wood packaging material. Key components include corner straps, washers, lag bolts, supports, and wrapping materials, with precise dimensional specifications provided. Special markings and handling instructions are specified, including "Not for Outside Storage" and "Lift by Base Only." The document requires all wooden materials to be heat-treated (HT) to 56 degrees Centigrade for 30 minutes and certified by an agency recognized by the American Lumber Standards Committee (ALSC).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_1_CAVAF_Reporting.pdf | ||
| Attachment_9_RQR.pdf | ||
| Attachment_6_RDL.pdf | ||
| Attachment_8_CDRLs.pdf | ||
| Attachment_4_PKG_SOW.pdf | ||
| Attachment_7_IUID.pdf | ||
| Attachment_3_PKGRQMT_REPORT.pdf | ||
| Attachment_11_TRNSPDATA_REPORT.pdf | ||
| Attachment_5_PWS.pdf | ||
| Attachment_2_ITMDESC_REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 27 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. SECURE SUPPORT BASE, REF.-4, MEMBERS TO BASE, REF.-2, WITH NAILS OR STAPLES IAW ASTM F1667.
2. SECURE REF.-11 AND REF.-12 MEMBERS WITH NAILS OR STAPLES IAW ASTM F1667 AS ILLUSTRATED. THEN ATTACH
REF.-9 AND REF.-10 VIA BOLTS, REF.-13, LINING UP HOLES.
3. MARK CENTER OF BALANCE BY MEASURING FROM THE OUTSIDE OF THE SKIDS, REF.-1, TO THE CENTER AT 17 1/2
INCHES.
CAUTION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .