Attachment 1 - Tech Specification.pdf

This document is a technical specification and design drawing set for a modular, portable enclosure structure, likely intended for federal procurement or contract purposes.

The enclosure is a factory-wired and assembled unit measuring approximately 20 feet 1 9/16 inches in length by 10 feet 4 7/16 inches in width, with an overall interior height of 7 feet 8 inches to 8 feet 9 9/16 inches. The structure features a C6x8.2 steel channel floor structure with four sets of forklift pockets positioned on all sides for mobility and transport. Key components include vinyl-covered drywall paneling (gray interior and exterior), clear satin anodized aluminum extrusions, sliding windows with 3/16-inch tempered glass, a 200-square-foot 20GA x 1 1/2-inch roof deck, and an acoustical ceiling system. The electrical infrastructure includes a 12.0/11.2 BTU through-wall HVAC system, 230-volt single outlet, 115-volt duplex outlet, 3-way light switch, 2x4 flat panel LED light fixture, and a 100-amp single-phase 12-circuit load center with main breaker. The unit is equipped with heavy-duty aluminum doors with glass, lever lock sets, horizontal sliding windows, and a vinyl-covered drywall core with clear satin anodized aluminum extrusions. The floor consists of two layers of 3/4-inch floor board over a layer underlayment with standard white/gray VCT flooring. The suggested ceiling layout includes main tees, cross tees, and integrated structural bracing. Four elevation views (A, B, C, and D) depict window and door placements, with detailed sections illustrating door assemblies, roof deck configurations, wall panel connections, and base frame construction using standard steel channel construction.