Attachment 1 Target MS HiPiMS 1200 (monobloc target).pdf
PDF 48 KB Posted
- Attached to
- Chrome Targets Federal contract opportunity
- Solicitation number
- 2031ZA25Q00089
About this file
This is a technical drawing/specification sheet for a monobloc target with detailed engineering specifications and tolerances. The drawing shows a rectangular target with dimensions of 402mm (-0.3mm tolerance) length and 131mm (-0.2mm tolerance) width, drawn at a 1:2 scale and dated March 8, 2021.
The document includes strict manufacturing requirements, including general fabrication tolerances (±0.2mm for basic dimensions, ±0.1mm for one decimal place, ±0.05mm for two decimal places, and ±0.005mm for three decimal places), angle tolerances of 0°30', and surface quality specifications stating the initial state must be free from indentations, gouges, and scratches. This technical specification appears to be for the chrome targets required by the Bureau of Engraving and Printing for their currency note production facilities in Washington, D.C. and Fort Worth, TX.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 2031ZA25Q00089 Amendment 2 Chrome Targets.pdf 3.17.25.pdf | ||
| Chrome Targets Amendment 1.pdf | ||
| Attachment 2 Price Schedule.docx | DOCX document | |
| Chrome Targets SOW.doc | DOC document | |
| Chrome Targets Combined Synopsis Solicitation Notice.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 2 3 4 5 6 7 8 9 10 11 12
H
1 2 3 4 5 6 7 8 9 10 11 12
D
G
F
E
A
C
B
D
G
F
E
A
C
B
H
FIRST ANGLE
DATE
DRAWING NUMBER
DRAWN BY
ORIGINAL SCALE
MATERIAL SPECIFICATION
CHECK DATE
MAKE FROM
TREATMENT/HARDNESS/FINISH
SUPPLIER TYPE 0.2
INITIAL STATE OF SURFACE MUST
BE FREE FROM INDENTATIONS,
GOUGES AND SCRATCHES.
ANGLE TOLERANCES 0 30'
ALL HOLES
UNLESS STATED OTHERWISE.
DESCRIPTION
CHECKED BY DESIGN APPROVED BY APPROVAL DATE REVISION
PERMITTED GENERAL
TOLERANCES UNLESS
OTHERWISE STATED;
FABRICATIONS 1
0. 0.2 .0 0.1
.00 0.05 .000 0.005
ORIGINAL SHEET SIZE
ALL DIMENSIONS EXPRESSED
IN mm UNLESS
OTHERWISE STATED.
3.2 6.4
402 -0.3
-0
.2
1:2 08-03-21
A3 MONOBLOC TARGETSEE_NOTE
DO NOT SCALE SHEET 1 OF 1
An.a. n.a. n.a. n.a.
ISSUE AUTHOR DETAIL OF CHANGE ECO REF DATE
A FOR ISSUE ~ n.a.
| Sheet 1 |
| Views |
| new_view_1 |
| bottom_2 |
| Zones |
| A1 |
File details come from the government source that posted it. Updated .