Attachment__1_-_Specifications.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DX89R-7

Mini Excavator

Drive System Travel speed [low – high] 1.7 – 2.9 mph (2.7 – 4.7 km/h)

Traction force, max. (drawbar pull) 14550.0 lbf. (6600.0 kgf)

Max. grade 58% (35°)

Environment Sound level (ISO 6395) 99 dB(A)

Cabin sound level (ISO 6396) 75 dB(A)

Refill Capacities Fuel tank 42.27 gal. (160.0 L)

Cooling system (radiator capacity) 2.6 gal. (10.0 L)

Engine oil 2.3 gal. (8.6 L)

Final drive (each side) 0.4 gal. (1.6 L)

Hydraulic system 37.0 gal. (140.0 L)

Hydraulic tank 24.8 gal. (94.0 L)

All capacities are approximate values. Always refer to the machine’s OM for exact refill levels.

Check the dipstick, level eye, level plug, etc., to achieve the correct level.

Hydraulic Cylinders

Boom (2) bore x rod diameter x stroke 4.5" x 2.7" x 30.5" (115 mm x 70 mm x 775 mm)

Arm (1) bore x rod diameter x stroke 3.9" x 2.5" x 33.3" (100 mm x 65 mm x 846 mm)

Bucket (1) bore x rod diameter x stroke 3.5" x 2.3" x 27.1" (90 mm x 60 mm x 690 mm)

The piston rods and cylinder bodies are made of high-strength steel. A shock-absorbing mechanism is fitted in all cylinders to ensure shock-free operation and extended piston life.

Engine Make DEVELON

Model D24

Number of cylinders 4

Rated power, gross (hp per SAE J1995) 65.0 hp (48.5 kW) @ 2100 rpm

Rated power, net (hp per SAE J1349) 63.1 hp (47.1 kW) @ 2100 rpm

Max. torque, net (SAE J1995) 183.0 lbf.·ft. (39.0 kgf·m) @ 1600 rpm

Displacement 146.0 in.³ (2.4 L)

Bore and stroke 3.5" x 3.7" (90 mm x 94 mm)

Starter 12 V, 3.4 hp (2.5 kW)

Battery 12 V, 100 AH

Alternator 13.5 V, 90 A

Air cleaner Double elements

Hydraulics Main pumps 1 x 39.4 gpm (149.0 L/min.)

Pilot pump (gear design) 6.1 gpm (23.1 L/min.)

Relief pressure 4278.6 psi (300.8 kg/cm²)

Working Pressure Boom/arm/bucket (normal mode) 4496.2 psi (316.1 kg/cm2)

Swing (crossover relief) 3129.0 psi (220.0 kg/cm2)

Undercarriage Upper rollers (each track) 1

Lower rollers (each track) 5

Number of shoes (links per side) 40

Swing Mechanism Swing speed 0 – 9.5 rpm

Swing torque 14133.0 lbf.·ft. (1954.0 kgf·m)

NOTE: Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE) and ISO standards. Specifications and design are subject to change without notice. All dimensions are given for DEVELON mini excavators equipped with standard rubber tracks. Pictures of DEVELON mini excavators may show other than standard equipment. All dimensions are shown in inches. Respective metric dimensions are enclosed by parentheses. Rounding may impact specifications. DEVELON equipment is manufactured with a Quality Management System that is in compliance with ISO 9001:2008.

Dimensions

Standard Arm & HVAC Cabin

(US20/US40)

Long Arm & HVAC Cabin

(US21/US41)

Boom type One-piece boom

Arm type Standard arm Long arm

Bucket type (SAE) General-purpose

Track type Fixed (rubber)

Shipping length A 21' 1.2" (6430 mm) 21' 2.0" (6450 mm)

Overall height B 8' 8.6" (2657 mm)

Shipping width C 7' 4.6" (2250 mm)

Tail swing radius D 4' 9.7" (1465 mm)

Tail swing overhang (rear)* –

Tail swing overhang (side) E 1' 1.4" (340 mm)

Counterweight clearance F 2' 5.8" (758 mm)

Upper structure width H 7' 4.6" (2250 mm)

Cabin height above house I 2' 10.6" (879 mm)

Tumbler distance J 7' 7.1" (2315 mm)

Overall track length K 9' 8.2" (2952 mm)

Undercarriage width L 7' 4.6" (2250 mm)

Track gauge width M 5' 10.9" (1800 mm)

Track width N 1' 5.7" (450 mm)

Track height O 2' 1.8" (656 mm)

Car body clearance P 11.6" (294 mm)

Blade height Q 1' 5.9" (454 mm)

Blade clearance R 1' 7.8" (502 mm)

Max. blade cut, below ground S 1' 8.1" (511 mm)

*Not shown on diagram Less than zero indicated as “–”

All packages include rotating piping as standard for DX89R-7.

Centerline of RotationGround Line

A

B

S

L

M

NJ

K

I

E P O

H

C

D

F

RQ

G

Working Range

N

OK

Q P

J

J C

Boom length 11' 1.4" (3380 mm)

Arm length 5' 7.0" (1700 mm) 7' 4.6" (2250 mm)

Bucket capacity (SAE) 0.37 yd3 (0.28 m3)

Max. digging reach A 23' 0.0" (7015 mm) 24' 8.5" (7530 mm)

Max. digging reach (ground) B 22' 5.7" (6850 mm) 24' 2.6" (7380 mm)

Max. digging depth C 13' 5.8" (4110 mm) 15' 3.9" (4670 mm)

Max. dumping height D 15' 5.2" (4705 mm) 16' 6.8" (5050 mm)

Max. digging height E 21' 11.4" (6690 mm) 23' 1.0" (7035 mm)

Max. bucket pin height F 18' 9.0" (5715 mm) 19' 10.6" (6060 mm)

Max. vertical wall depth G 10' 5.2" (3180 mm) 12' 1.7" (3700 mm)

Max. vertical digging radius H 15' 10.0" (4825 mm) 16' 5.1" (5005 mm)

Min. swing radius I 9' 1.3" (2775 mm) 9' 7.9" (2945 mm)

Max. depth to 8' line J 12' 3.1" (3735 mm) 14' 3.1" (4345 mm)

Min. radius to 8' line K 5' 2.2" (1580 mm) 5' 1.0" (1550 mm)

Min. digging reach L 2' 3.0" (685 mm) 0.8" (20 mm)

Boom swing – left/right 60° / 60°

Digging force, bucket 14771.0 lbf. (6700.0 kgf)

Digging force, arm 9833.0 lbf. (4460.0 kgf) 8201.0 lbf. (3720.0 kgf)

Counterweight 3196 lb. (1450 kg)

Operating weight 20983 lb. (9537 kg) 21025 lb. (9537 kg)

Ground pressure 6.0 psi (0.42 kg/cm2)

Bucket

Bucket Type Model Capacity* yd3 (m3)

Width

in. (mm)

Weight

lb. (kg)

Height

Length

Number of teeth

Connection/ Type

Quick-Hitch Ditching

(QH08GB)

DC08GB-42QH 0.53 (0.41) 42 (1066.0) 540 (245.0)

26.1875 (665.0) 32.6875 (830.0) – Quick-hitch

DC08GB-48QH 0.62 (0.47) 48 (1219.0) 605 (274.0)

DC08GB-54QH 0.70 (0.54) 54 (1371.0) 640 (290.0)

DC08GB-60QH 0.80 (0.61) 60 (1524.0) 700 (318.0)

Quick-Hitch Heavy-Duty

(QH08GB)

HD08GB-12QH 0.15 (0.11) 12 (304.0) 245 (111.0)

28.3125 (719.0) 43.375 (1101.0)

Quick-hitch

HD08GB-18QH 0.21 (0.16) 18 (457.0) 290 (132.0) 4

HD08GB-24QH 0.32 (0.24) 24 (609.0) 340 (154.0) 4

HD08GB-30QH 0.42 (0.32) 30 (762.0) 400 (181.0) 5

HD08GB-36QH 0.52 (0.40) 36 (914.0) 460 (209.0) 6

Pin-On Ditching

DC08GB-42 0.59 (0.45) 43 (1092.0) 560 (254.0)

33.25 (844.0) 39.5 (1003.0) – Pin-on

DC08GB-48 0.70 (0.54) 49 (1244.0) 610 (276.0)

DC08GB-54 0.78 (0.60) 55 (1397.0) 665 (301.0)

DC08GB-60 0.88 (0.67) 61 (1549.0) 700 (317.0)

Pin-On Heavy-Duty

HD08GB-14 0.18 (0.14) 15.5 (393.0) 390 (177.0)

33.5 (850.0) 44.0 (1117.0)

Pin-on

HD08GB-18 0.23 (0.18) 19 (482.0) 440 (200.0) 4

HD08GB-24 0.33 (0.25) 25 (635.0) 490 (222.0) 4

HD08GB-30 0.45 (0.34) 31 (787.0) 555 (252.0) 5

HD08GB-36 0.54 (0.41) 37 (939.0) 620 (281.0) 6

*Capacity based on ISO 7451 and heaped with a 1:1 angle of repose

· Equipped with bolt-on wear shrouds

· Equipped with bolt-on teeth

· Equipped with bolt-on cutting edge

· These recommendations are given as a guide only and based on typical operating conditions.

Please consult with your DEVELON dealer to properly match buckets and attachments for the application.

Boom 11' 1.4" (3380 mm)

Arm 5' 7.0" (1700 mm) 7' 4.6" (2250 mm)

Shoe size 1' 5.0" (450 mm)

Counterweight 3196 lb. (1450 kg)

Lifting Capacity Rating over front Rating over side or 360°

(ft. or m)

DX89R-7 US20/US40

Boom: 11' 1.4" (3380 mm) | Arm: 5' 7.0" (1700 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Rubber Shoes | Dozer Down | Bucket: None | Unit: lb. (kg)

5' (1.5 m) 10' (3.0 m) 15' (4.5 m) 20' (6.0 m) Max. Reach

20'

(6.0 m) 15' * 4260 * 4260 * 4180 4160 16.12'

(4.5 m) (* 1930) (* 1930) (* 1900) (1890) (4.91 m) 10' * 6410 * 6410 * 4710 * 4710 * 3890 3210 18.83'

(3.0 m) (* 2910) (* 2910) (* 2130) (* 2130) (* 1770) (1450) (5.74 m) 5' * 5800 4470 * 4150 2930 * 4080 2930 19.7'

(1.5 m) (* 2630) (2030) (* 1880) (1330) (* 1850) (1330) (6.0 m) Ground * 9260 7880 * 6360 4290 * 4440 3020 19.04' Level (* 4200) (3580) (* 2890) (1950) (* 2010) (1370) (5.8 m)

-5' * 10360 * 10360 * 9330 7950 * 5590 4280 * 4440 3650 16.62' (-1.5 m) (* 4710) (* 4710) (* 4230) (3610) (* 2540) (1940) (* 2010) (1660) (5.07 m)

-10' * 4120 * 4120 * 3370 * 3370 10.89' (-3.0 m) (* 1870) (* 1870) (* 1530) (* 1530) (3.32 m)

A Distance from center of rotation B Height

Do not use dozer blade as outrigger

NOTE: Lifting capacities are in compliance with SAE 1097 and ISO 10567. Machine in lifting mode with power boost turned on. Load point is the end of the arm. Rated loads shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Rated loads marked with an asterisk (*) are limited by hydraulic capacities. The least stable position is over the side. The total mass of machine includes the mass of the boom, arm, counterweight, all operating fluids and 165 lb. (75 kg) operator.

Boom: 11' 1.4" (3380 mm) | Arm: 5' 7.0" (1700 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Rubber Shoes | Dozer Up | Bucket: None | Unit: lb. (kg)

15' * 4260 4080 4040 3510 16.12'

(4.5 m) (* 1930) 1850 1830 1590 (4.91 m) 10' * 6430 * 6430 4590 3970 3090 2690 18.83'

(3.0 m) (* 2920) (* 2920) 2080 1800 1400 1220 (5.74 m) 5' 4330 3720 2820 2450 2820 2440 19.7'

(1.5 m) (1970) (1690) (1280) (1110) (1280) (1110) (6.0 m) Ground 7720 6350 4150 3550 2910 2520 19.04' Level (3500) (2880) (1880) (1610) (1320) (1140) (5.8 m)

-5' * 10390 * 10390 7790 6420 4140 3540 3530 3040 16.62' (-1.5 m) (* 4710) (* 4710) (3530) (2910) (1880) (1610) (1600) (1380) (5.07 m)

-10' * 4120 * 4120 (* 3370) (* 3370) 10.89' (-3.0 m) (* 1870) (* 1870) (* 1530) (* 1530) (3.32 m)

Boom: 11' 1.4" (3380 mm) | Arm: 5' 7.0" (1700 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Steel Shoes | Dozer Down | Bucket: None | Unit: lb. (kg)

15' * 4260 * 4260 * 4180 * 4180 16.09'

(4.5 m) (* 1930) (* 1930) (* 1900) (* 1900) (4.9 m) 10' * 6410 * 6410 * 4700 * 4700 * 3890 3220 18.82'

(3.0 m) (* 2910) (* 2910) (* 2130) (* 2130) (* 1770) (1460) (5.74 m) 5' * 5800 4490 * 4150 2940 * 4080 2940 19.7'

(1.5 m) (* 2630) (2040) (* 1880) (1330) (* 1850) (1330) (6.0 m) Ground * 9230 7920 * 6360 4310 * 4440 3030 19.05' Level (* 4190) (3590) (* 2890) (1960) (* 2010) (1380) (5.81 m)

-5' * 10360 * 10360 * 9340 7980 * 5600 4300 * 4440 3660 16.65' (-1.5 m) (* 4700) (* 4700) (* 4240) (3620) (* 2540) (1950) (* 2010) (* 1660) (5.07 m)

-10' * 4160 * 4160 * 3370 * 3370 10.89' (-3.0 m) (* 1890) (* 1890) (* 1530) (* 1530) (3.32 m)

NOTE: Lifting capacities are in compliance with SAE 1097 and ISO 10567. Machine in lifting mode with power boost turned on. Load point is the end of the arm. Rated loads shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Rated loads marked with an asterisk (*) are limited by hydraulic capacities. The least stable position is over the side. The total mass of machine includes the mass of the boom, arm, counterweight, all operating

Boom: 11' 1.4" (3380 mm) | Arm: 5' 7.0" (1700 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Steel Shoes | Dozer Up | Bucket: None | Unit: lb. (kg)

15' * 4260 3880 3820 3340 16.09'

(4.5 m) (* 1930) (1760) (1730) (1520) (4.9 m) 10' * 6410 * 6410 4330 3770 2920 2560 18.82'

(3.0 m) (* 2910) (* 2910) (1960) (1710) (1320) (1160) (5.74 m) 5' 4070 3530 2650 2320 2650 2320 19.7'

(1.5 m) (1850) (1600) (1200) (1050) (1200) (1050) (6.0 m) Ground 7170 5960 3900 3360 2730 2380 19.05' Level (3250) (2700) (1770) (1520) (1240) (1080) (5.81 m)

-5' * 10360 * 10360 7230 6020 3880 3350 3310 2870 16.65' (-1.5 m) (* 4700) (* 4700) (3280) (2730) (1760) (1520) (1500) (1300) (5.07 m)

-10' * 4160 * 4160 * 3370 3370 10.89' (-3.0 m) (* 1890) (* 1890) (* 1530) (* 1530) (3.32 m)

DX89R-7 US21/US41

Boom: 11' 1.4" (3380 mm) | Arm: 7' 4.6" (2250 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Steel Shoes | Dozer Down | Bucket: None | Unit: lb. (kg)

20' * 4020 * 4020 13.17'

(6.0 m) (* 1820) (* 1820) (4.01 m) 15' * 3410 * 3410 * 3140 * 3140 18.25'

(4.5 m) (* 1550) (* 1550) (* 1420) (* 1420) (5.56 m) 10' * 3990 * 3990 * 3710 3000 * 2970 2770 20.61'

(3.0 m) (* 1810) (* 1810) (* 1680) (1360) (* 1350) (1260) (6.28 m) 5' * 9340 8350 * 5250 4490 * 4040 2910 * 3090 2550 21.39'

(1.5 m) (* 4240) (3790) (* 2380) (2030) (* 1830) (1320) (* 1400) (1160) (6.52 m) Ground * 9830 7790 * 6170 4240 * 4260 2820 * 3540 2610 20.8' Level (* 4460) (3540) (* 2800) (1920) (* 1930) (1280) (* 1610) (1180) (6.34 m)

-5' * 8180 * 8180 * 10310 7750 * 5970 4170 * 4020 3020 18.68' (-1.5 m) (* 3710) (* 3710) (* 4680) (3520) (* 2710) (1890) (1820) (1370) (5.69 m)

-10' * 14820 * 14820 * 6760 * 6760 * 3780 * 3780 14.13' (-3.0 m) (* 6720) (* 6720) (* 3070) (* 3070) (* 1720) (* 1720) (4.31 m)

NOTE: Lifting capacities are in compliance with SAE 1097 and ISO 10567. Machine in lifting mode with power boost turned on. Load point is the end of the arm. Rated loads shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. Rated loads marked with an asterisk (*) are limited by hydraulic capacities. The least stable position is over the side. The total mass of machine includes the mass of the boom, arm, counterweight, all operating

DX89R-7 US21/US41

Boom: 11' 1.4" (3380 mm) | Arm: 7' 4.6" (2250 mm) | Counterweight: 3196 lb. (1450 kg) | 1' 5.0" (450 mm) Rubber Shoes | Dozer Up | Bucket: None | Unit: lb. (kg)

20' * 4020 * 4020 13.17'

(6.0 m) (* 1820) (* 1820) (4.01 m) 15' * 3410 * 3410 * 3140 2880 18.25'

(4.5 m) (* 1550) (* 1550) (* 1420) (1310) (5.56 m) 10' * 3990 * 3990 2900 2520 2670 2320 20.61'

(3.0 m) (* 1810) (* 1810) (1310) (1140) (1210) (1050) (6.28 m) 5' 8200 6790 4350 3740 2800 2430 2450 2120 21.39'

(1.5 m) (3720) (3080) (1970) (1690) (1270) (1100) (1110) (960) (6.52 m) Ground 7630 6270 4110 3500 2710 2340 2510 2160 20.8' Level (3460) (2840) (1860) (1590) (1230) (1060) (1140) (980) (6.34 m)

-5' * 8180 * 8180 7590 6230 4030 3430 2910 2500 18.68' (-1.5 m) (* 3710) (* 3710) (3440) (2830) (1830) (1560) (1320) (1140) (5.69 m)

-10' * 14820 * 14820 * 6760 6440 * 3780 * 3780 14.13' (-3.0 m) (* 6720) (* 6720) (* 3070) (2920) (* 1720) (* 1720) (4.31 m)

Engine Emissions (EPA), T4f

High-pressure common-rail (HPCR)

Diesel oxidation catalyst (DOC)

Fuel filter with water separator

Dual element dry-type air filter with evacuator

Precleaner

Electronic engine control (ECU)

Auto idle

Auto shutdown (time-adjustable)

Coolant overheat engine protection system

Fuel filler pump l

Hydraulic Mechatronics Design

Axial piston main pump (tandem)

Pulley-driven mechanical fan

Pilot-operated control valves

Gear pilot pump

Axial piston swing motor

2-stage planetary swing reduction gear

Axial piston travel motor (2 speed)

Auxiliary hydraulics, one- & two-way piping

Auxiliary hydraulics, tilt/rotate piping

Adjustable auxiliary flow & pressure, 10 presets

Boom & arm lock valves l

Electrical System voltage – 12 V

Alternator – 13.5 V, 90 A

1 x 12 V batteries, 100 AH reserve capacity

Blade-type fuse panel

Main circuit breaker

Lights, work (LED): machine (2), boom (1)

Rotating beacon l

Overload warning alarm l

Hour meter

Rearview camera

Around view camera l

Laptop service port

Cabin Steel, all-weather & sound-suppressed

ROPS (ISO 12117-2:2008)

Viscous mount with spring reinforcement

Front window with wiper/washer

Skylight top hatch with sun screen

Pull-up type top front window

Adjustable sliding side door window

Lockable doors

Seat

- Heated

- Air-suspension

- 2" (51 mm) seat belt

- Adjustable height & recline

- Adjustable fore/aft

- Adjustable armrests

Control stands

- Height adjustable

- Mounted to seat base

Storage for operator’s manuals

Mirrors

Fully automatic HVAC with ambient temperature sensor

8" multi-function LCD interactive display monitor

Bluetooth® stereo

Speakers (2)

Antenna, roof-mounted

Emergency breakout tool

Power socket, 12 V

Cup holder

Interior light

Coat hanger

FOGS roof guard l

FOGS front window guard l

Controls Joystick controls

Pattern control change valve (SAE, ISO)

Joystick attachment control, thumbwheel switches/buttons

- �Right (one- and two-way)

- �Left (tilt/rotate, horn)

Control stands

- Height adjustable

- Sliding (fore/aft)

- Tilting armrests

Engine speed control dial

Travel pedals with hand levers

Straight travel pedal l

Keypad, console-mounted

- Power mode selector

- Travel speed selector

- Work mode switch (digging, breaker, shear)

- Light/Wiper/Washer/Travel Alarm/Boom Swing

Emergency stop switch

AC control panel

Audio control panel

Display Monitor & Warnings Data display

- Fuel level

- Engine coolant temperature

- Hydraulic oil temperature

- Engine rpm

- Digital clock

- Camera/AVM display

- Power mode selector

- Auto idle selector

- Indicators

Warning symbols/lights

- Battery

- Engine oil pressure

- Coolant overheated

- Check engine

- Water-In-Fuel (WIF) sensor

- Hydraulic oil temperature

- Clogged air cleaner

- Low fuel warning

- Low DEF level

- Seat belt

- DEF pressure

- Engine coolant level

Travel alarm

Buzzer

- Engine oil pressure

- Engine coolant temperature

Undercarriage Track guards & chains with adjusters

Track rollers, upper 1

Track rollers, lower 5

Shoes, triple grouser – 450 mm, rubber shoe

Shoes, triple grouser – 450 mm l

Shoes, triple grouser – 450 mm, steel shoe with rubber pad l

Shoes, triple grouser – 600 mm l

Dozer blade, front

Other Centralized lubrication

- Boom

- Swing

Handrails & service platforms

Skid-resistant steps & service platforms

Manuals

- Operation & Maintenance

- AEM Safety Manual

MY DEVELON (telematics)

Vandalism protection

- Lockable panels

- Lockable fluid fill points

- Anti-theft protection (password)

Standard l Optional

Standard & Optional Equipment | Standard Base Package, US20

Ce rt ai n sp ec ifi ca tio n(

s) a re b as ed o en gi ne er in g lc ul at io ns nd ot ct ua l m ea su m ts

. S pe cifi p ro vi de d fo r c om pa ris on p ur po se s ly ub je ct to c ha ng e w ith ou t n ice

. S cifi fo r y ou r i iv id ua l D

EV

EL

ON

e qu ip t w ill v ar y ba se or al v ia ns in es ig n, an uf ac tu rin g, ra tin g co iti s, he r f ac to rs , P ict ur es f D

EV

EL

ON

u ni ts ay ho w th er th ta eq ui pm t.

Powered by Innovation na.develon-ce.com/dx89r-7

DX89R-7 Mini Excavator Spec Sheet Printed in the U.S.A.

23906_005_D061225

©2025 HD Hyundai Infracore. All rights reserved. A brand of HD Hyundai Infracore.

TOUGHER

THAN THE

TERRAIN

The 4.5-10 MT Excavator Drum Mulcher DC Pro X (Depth Control) increases the versatility of your excavator and maximizes cut width relative to weight for more productivity per pass.

The 63cc two-speed adjustable displacement hydraulic motor provides impressive class leading torque to power through large material, while accommodating the higher flow rates provided by modern excavators.

EX 4.5 - 10 MT DRUM MULCHER DC PRO X

CUTS UP TO 8” DIAMETER BRUSH & TREES

AVAILABLE CUT WIDTH 30” | 50”

FLOW RANGE 12 - 40 GPM

EXCAVATOR SIZE 4.5 - 10 MT | 7 - 10 MT

750 LBS | 1,000 LBS

OVERGROWN PROPERTY

INVASIVE TREES

UTILITY & ROADSIDE MAINTENANCE

SLOPES & VALLEYS

SPECIFICATIONS

OPTIMIZED MATERIAL INFEED TWIN CHISEL® PLANER TEETH

IDEAL APPLICATIONS

• Get the best of both worlds with a sharp productive cutting edge and easy maintenance

• Planer design allows for quick sharpening of the cutting edge to maintain maximum productivity

• Teeth can be easily rotated, allowing a longer life over other hardened steel tooth options

• Forward drum exposure allows optimum tree engagement and productivity

• Feeds material from the left or right as you sweep the ground

• Produces an aesthetically desirable chip size with a single process, reducing the need for reprocessing

X

.5

T

R U

U

LC

P

O

X

CONTACT US email hello@diamondmowers.com web diamondmowers.com main office 605.977.3300

LE

*REQUIRES 1/2” CASE DRAIN

SELL-EX-4.5-10 MT-DRUM-MULCHER-PRO-X

R2-V2-09/10/24

*MINIMUM ½” THICK POLYCARBONATE OPERATOR PROTECTION REQUIRED.

SOME APPLICATIONS MAY REQUIRE ADDITIONAL PROTECTION.

Abrasion resistant

AR 400 LINER

minimizes wear from debris

OVERSIZED

SERRATED SKID

SHOES to control & position downed material for more effective mulching

2 SPEED VARIABLE

DISPLACEMENT PISTON

MOTOR for maximum productivity

Equipped with sharp

TWIN CHISEL ® PLANER TEETH

for high productivity & simple maintenance *Additional teeth options available

SEVERE DUTY

RATED BEARING

protected by labyrinth design

TE

TH

P

TI

S TWIN CHISEL® PLANER

»Truly the best of both worlds for productivity and easy maintenance. Made out of hardened steel, our design allows you to quickly sharpen the cutting edge to maintain maximum productivity.

IDEAL FOR

» Softer Soils » High-Productive Environments

FOUR POINT

HARDENED STEEL

»Acts like an axe to slice material for the most productive cut. The more aggressive design allows you to grab and pull in material more effectively.

» Finer Mulch » Limited Ground Contact

TWIN MAUL® CARBIDE

»Designed to withstand abrasion and extreme ground contact.

» Rocky Terrian » Fire-Danger Areas