Attachment 1 - Specifications.pdf
PDF 90 KB Posted
- Attached to
- Spray Rig Federal contract opportunity
- Solicitation number
- 12805B23Q0761
About this file
This document contains specifications for modifications to a CropCare 3PT Sprayer for the Spray Rig solicitation from the Department of Agriculture Agricultural Research Service Field Research Implementation and Information Delivery Plains Area. The specifications call for replacing the 200 gallon tank and saddle with two 110 gallon tanks and saddles, adding a third 110 gallon front mounted tank alongside a 55 gallon fresh water rinse tank. Modifications also include adding a plumbing manifold to direct separate pump supply and bypass return flow to jet agitators in each tank, modifying the boom spacing from 20 to 15 inches, and replacing the control system with an Ag Leader In Command 1200 & RTK variable rate control system integrated with individual nozzle control. Additional specifications include PWM pump control compatibility with Ag Leader components, installation of TP8008VS nozzles with caps and screens, and boom mounted filters for each boom section.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amend 2 - RFQ 12805B23Q0761.pdf | ||
| Amend 1 - RFQ 12805B23Q0761.pdf | ||
| Clauses and Provisions - 12805B23Q0761.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Custom PBZ/CropCare 3PT Sprayer Specifications
CropCare Specifications and modifications
- Remove 200 gal. tank and saddle from 3PT205 and replace with two 110 gal. tanks (47194) & saddles (TS3034P). A third 110 gal. tank will be front mounted alongside a fresh water rinse tank. Add plumbing manifold to direct pump supply as well as bypass return flow for three tanks separately. Plumb return flow to jet-agitators in corresponding tanks.
- Modify HXP30-20-3 from 20 in. spacing to 15 in.
- Modify CTRL1-ADAPT - remove T425 adapter harness, T430 power harness, T420 main harness & junction box; unit to be managed by Ag Leader (In Command 1200 & RTK) variable rate control system in combination with individual nozzle control. Be sure to use 6 sec.
regulating valve plus a manual on/off valve (to cut-off any return flow when flushing booms.
- Modify C3PT3-863 from throttling to by-pass plumbing
- Add 55 gal. front mount freshwater boom flush tank (plumbed to pump supply manifold - no return).
- Install PWM drive pump control to be compatible with Ag Leader control components supplied and installed by vendor.
- Add TP8008VS nozzles with caps and 50M screens (include 3 spares).
Description Qty 200 gallon three-point cat. 2 1 30ft hydraulic fold boom, narrow mount 1 Boom plumbing, (18) triple nozzle, 20" spacing 1 TJ to Raven adapter harness 7 Section 1 3 Sections, Throttling, for 3PT205-305 1 9402C Hypro Belt Drive Centrifugal (200/300 gallon 3PT) 1 2-1/2 gal fresh water safety tank 1 5-gallon foam marker system, Cat 2 3PT 1 Safety Light kit with 7 pin plug for X-fold booms 1 Boom mounted filters for 3 boom sections 1
File details come from the government source that posted it. Updated .