Attachment 1- Specifications.pdf
PDF 423 KB Posted
- Attached to
- Wet Offset Overprinting Machine (Jet Press) Federal contract opportunity
- Solicitation number
- SP7000-23-Q-0018
- Issued by
- Defense Logistics Agency
About this file
This document provides specifications for a wet offset overprinting machine sought under federal contract number SP7000-23-Q-0018 with the Defense Logistics Agency. The specifications require a machine with a maximum sheet size of 12 x 18 inches and minimum printing area of 3 1/4 x 4 1/4 inches. The perfecting area must accommodate sheets up to 4 1/4 x 12 inches. Production speeds of 30,000 and 60,000 eight-page signatures per hour are specified for one- and two-sided printing respectively. Additional requirements include plate sizes of 9 15/16 x 12 1/4 inches, blanket thickness of 0.037 inches, plate cylinder movement capabilities, and delivery table dimensions of 6 x 12 inches.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SP7000-23-Q-0018 Updated.pdf | ||
| SP7000-23-Q-0018.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Wet Offset Overprinting Machine Specifications
(Item can be new or used)
Sheet Size:
Maximum 12″ x 18″ Minimum 3 1/4″ x 4 1/4″
Printing Area:
Maximum 9″ x 12″ Minimum 3 1/4″ x 4 1/4″
Perfecting Area:
Four sided bleed, both sides, up to and including: 4 1/4″ x 12″ (108mm x 305mm)
Speeds:
Minimum size 3 1/4″ x 4 1/4″ (82mm x 108mm) up to 4 1/2″ x 12″ (114mm x 305mm) One side only: 30,000 eph (1 UP) 60,000 eph (2 UP)
Perfecting:
30,000 eph (1 UP)
Plate Size:
9 15/16″ x 12 1/4″ x .008″ (252mm x 311mm x 0.2mm)
Blanket Specifications: .037″ (0.94mm) thickness including adhesive back
Plate Cylinder Movement:
Circumferential: 360° Lateral: ± 1/8″ (3mm) Plate Skewing Capacity: ± 1/2'” (12mm)
Delivery Table:
Length: 6′ (1829mm) Width: 12″ (305mm)
Counter An add on that pulses at a set increment to help with taking the material off the conveyor for packaging. It will also ensure that we are putting the correct number of envelopes back in the boxes.
Plate Bender The plate bender "rolls" or bend’s the plates to go onto the plate cylinder. Without this the set up of the machine would not be possible.
Cams and Rails The cams and rails accommodate other size envelopes from the standard size #10’s and #9’s.
File details come from the government source that posted it. Updated .