Attachment 1_Specification-N4008423Q0018_6JUN2023.pdf

N4008423Q0018 Attachment 1

6 June 2023

ATTACHMENT 1:

SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this

Solicitation.

Deviations from the minimum mandatory requirements specified in Attachment 1: Specification – Mandatory Characteristics are NOT allowed for each item being purchased under this solicitation and will be determined nonresponsive and not eligible for award.

ITEM 0001, LOADER SCOOP

GENERAL DESCRIPTION

Loader, scoop, skid steering, 4x4, minimum 0.35m³ standard bucket, diesel engine driven.

Offeror Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

All vehicles shall be the newest model and year at the time of delivery and ready for use. Offeror Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use.

YES NO

Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture.

OFFEROR AGREES: YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity Two (2) each. E/C 4532-00 OFFEROR AGREES: YES

NO

(2) Minimum Dimensions, Loading Capacity and Rated Operating Capacities (Metric/Inches and kg/lbs).

Offeror’s Proposed Vehicle Dimensions and capacities (*To be inserted by offeror) Millimeter

Overall Length (Including end of STD size bucket) 3,000 *___________mm “ Width (Including end of STD size bucket) 1,650 *___________mm

Maximum Loading Capacity: 900kg/1,984lbs *___________kg Rated Operating Capacity: 690kg/1,521lbs *___________kg

(3) Exterior Color. Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers. Reflectorized tape or paint dark blue color. United States Navy Registration Numbers 45-05904 through 45-05905 are applied. The contractor shall install the plate in rear or decals/stickers on both sides and rear of body. Lettering to include "U. S. NAVY" in 3 inch letters (minimum) on the top, seven-digit USN number for vehicle(s) in 7-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 3inch letters (minimum) centered the bottom of USN number. OFFEROR AGREES: YES NO

(5) Rustproofing and Undercoating. Manufacturer’s standard. OFFEROR AGREES: YES NO

(6) Engine Displacement. Manufacturer’s standard capacity diesel engine. OFFEROR AGREES: YES

NO

(7) PTO system and performance: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Transmission: Automatic. OFFEROR AGREES: YES NO

(9) Lighting System: Front head lights and safety revolving light shall be installed on manufacturer’s standard position. OFFEROR AGREES: YES NO

(10) Rear View Mirro: Manufacturer’s standard. OFFEROR AGREES: YES NO

(11) Cabin Heater: Manufacturer’s standard. OFFEROR AGREES: YES NO

(12) Back Beeper. Shall have a standard back up beeper while operating in reverse. OFFEROR AGREES:

YES NO

(13) Windshield Glasses and Wiper. Shall be installed for front and rear. Front windshield shall be installed wiper. OFFEROR AGREES: YES NO

(14) Safety Devices. Manufacturer’s standard. OFFEROR AGREES: YES NO

OTHER MISCELLLANEOUS REQUIREMENTS

(1) Accessories

a. Pallet Fork: Manufacturer’s standard. OFFEROR AGREES: YES NO

b. Optional Dozer Blade: Minimum 1,650mm width. OFFEROR AGREES: YES NO

(1) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. Warranty service must be provided in Yokosuka area.

OFFEROR AGREES: YES NO

The following dealer(s) will provide the warranty work.

a. For Yokosuka area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(4) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual and one (1) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano Masakazu.Hamano.ln@us.navy.mil). OFFEROR AGREES: YES NO

(2) Date. The vehicle and containers shall be delivered at the delivery point specified above within 360 calendar days after contract is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified. OFFEROR AGREES: YES NO

OFFEROR AGREES: YES NO

ITEM 0002-0004, AERIAL PLATFORM

GENERAL DESCRIPTION

Aerial platform, self-propelled, wheel mounted, diesel engine driven, telescopic straight boom type, operator controls on platform, minimum 450 kg / 992lbs (with conditions) platform loading capacity. Offerors Proposed Vehicle for Item 0002 meets the General Description provided.

YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0002 will be the newest model and year at the time of delivery and ready for use. YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity Five (5) each. E/C 5460-20 OFFEROR AGREES: YES NO

(2) Minimum Dimensions (Metric/Inches) OFFEROR’S PROPOSED

VEHICLE DIMENSIONS &

OPERATING RANGE

(*To be inserted by offeror) Millimeter

Overall Length 13,500 *______________mm " Width 2,490 *______________mm " Height 3,000 *______________mm

Maximum Working Height: Minimum 36 meter *______________Meters Maximum Working Radius: Minimum 18 meter *______________Meters

(3) Exterior Color: Manufacturer's standard color. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers. Reflectorized tape or paint dark blue color. United States Navy Registration Numbers 54-10105 through 54-10106 for Yokosuka (Not required for Sasebo) are applied. The contractor shall install or paint both sides and rear of body. Lettering to include "U. S.

NAVY" in 3 inch letters (minimum) on the top, seven-digit USN number for vehicle(s) in 7-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 3inch letters (minimum) centered the bottom of USN number. OFFEROR AGREES: YES NO

(5) Rustproofing and Undercoating: Manufacturer's standard. OFFEROR AGREES: YES

NO

(6) Electrical Systems: Manufacturer's standard. OFFEROR AGREES: YES NO

(7) Engine Displacement: Manufacturer’s standard. OFFEROR AGREES: YES NO

(8) Lifting Eye: Shall be installed on manufacturer’s standard portion. OFFEROR AGREES:

YES NO

(9) Head Lights: Shall be installed on body. OFFEROR AGREES: YES NO

(10) Working Lights: Shall be installed on platform. OFFEROR AGREES: YES NO

(11): Bucket Control Protection Clear Cover. OFFEROR AGREES: YES NO

(12) Safety Devices: Manufacturer's standard. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. Warranty service must be provided in the following area. OFFEROR AGREES: YES NO

a. For Yokosuka area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Sasebo area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(4) Technical Publications (in Japanese CD or CD ROM is acceptable One (1) set of technical (shop repair) manuals and part catalogs. One (1) set of operator manual in English and Japanese for each equipment and to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor, Two (2) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano Masakazu.Hamano.ln@us.navy.mil) and Three (3) each to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie Junichi.Ujiie.ln@us.navy.mil).

OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 600 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

OFFEROR AGREES: YES NO