Attachment_1_Specification.pdf
PDF 124 KB Posted
- Attached to
- Bariatric Bed (DGS-OTA) Addendum 2
- Solicitation number
- 0000033100
- Issued by
- Napa County, California
About this file
This document is a bid specification from the State of California Department of Veterans Affairs (CalVet) for bariatric beds and mattresses to be used at the Veterans Home of California located in Yountville. The specification details the minimum requirements for the bariatric bed, including the bed frame, sleep surface dimensions, overall bed dimensions, adjustability features, power requirements, side rails, weight capacity, and integrated scale and controls. The specification also details the requirements for the bariatric mattress, including size conversions, thickness, topper material, and weight capacity.
The bid specification does not provide any information about the quantities required, response due dates, award dates, contract terms, or renewal options. It also does not include any details about pricing, set asides, incumbent vendors, funding sources, or other salient commercial terms.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_4_Narrative_Response.docx | DOCX document | |
| Addendum_2_8955_0000033100.pdf | ||
| Alternative_Protest_Process_(APP)_.doc | DOC document | |
| Addendum_1_8955_0000033100.pdf | ||
| Attachment_3_Cost_Worksheet.xlsx | XLSX spreadsheet | |
| Attachment_2_Admin_Requirement.docx | DOCX document | |
| Attachment_5_Work_Authorization_Form.docx | DOCX document | |
| Addendum_1_Q_A_BU_8955_0000033100.pdf | ||
| IFB_8955_0000033100.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California Bid Specification
Bariatric Bed and Mattress
BU8955 Event ID 0000033100 Attachment #1
6530-BS-0211705
Lai, Y Page 1 of 2 10/3/2024
1.0 SCOPE
This specification sets forth minimum requirements for bariatric beds and mattresses for use by the State of California Department of Veterans Affairs (CalVet) at the Veterans Home of California located in Yountville.
2.0 APPLICABLE LAWS AND STANDARDS
Laws, regulations, policies, and standards listed in this section form a part of this bid specification as cited in the text.
2.1 LAWS, REGULATIONS, POLICIES
2.1.1 N/A.
2.2 INDUSTRY STANDARDS
2.2.1 International Electrotechnical Commission (IEC) 60601-1: Medical electrical equipment - Part 1: General requirements for basic safety and essential performance.
2.2.2 IEC 60601-2-52: Particular requirements for the basic safety and essential performance of medical beds.
3.0 GENERAL REQUIREMENTS
The bed and mattress shall meet all the following requirements:
3.1 BARIATRIC BED
3.1.1 Bed frame shall include:
a. Headboard
b. Platform
c. Footboard
d. Side rails
3.1.2 Bed frame shall comply with:
a. IEC 60601-1
b. IEC 60601-2-52.
3.1.3 Sleep surface width: 36 inches, expandable to 42 inches and 48 inches.
3.1.4 Sleep surface length: Minimum 80 inches (Expandable length is acceptable but not required).
3.1.5 Bed overall width
a. Adjustable
b. Without expansion: Minimum 39 inches.
c. At full expansion: Maximum 53 inches.
3.1.6 Overall bed length (at full extension): Maximum 98 inches.
State of California Bid Specification
Bariatric Bed and Mattress
BU8955 Event ID0000045329 Attachment #1
6530-BS-0211705
Lai, Y Page 2 of 2 10/3/2024
3.1.7 Bed height:
a. Adjustable height feature.
b. High end of height range (measured from floor to bed platform surface):
Minimum 28 inches.
3.1.8 Color: Gray, White or neutral color.
3.1.9 Power:
a. Electric: 115-120 Volts Alternating Current, 60 Hertz, 6 Ampere
b. Includes: Battery backup power with integrated bed charger.
3.1.10 Side rails: One-handed release.
3.1.11 Safe working load (SWL): Minimum 1,050 lbs (includes weight of patient, mattress, and medical equipment/accessories attached to the bed).
3.1.12 Staff bed controls with integrated patient scale.
3.1.13 Patient bed control shall be within the patient’s reach.
3.1.14 Back angle to horizontal range: 0 to Minimum 60 degrees.
3.1.15 Knee angle to horizontal range: 0 to Minimum 20 degrees.
3.1.16 Caster set:
a. Quantity: Four
b. Type: Heavy-duty dual caster wheels.
c. Locking mechanism: Central locking brake or each caster wheel shall be individually lockable.
3.2 BARIATRIC MATTRESS
3.2.1 Three size conversions (Width x Length) with seamless sleeve for foam bolsters in addition to main surface:
a. Main surface: 36 inches x Minimum 80 inches.
b. Surface with one bolster insertion: 42 inches x Minimum 80 inches.
c. Surface with two bolsters insertions: 48 inches x Minimum 80 inches.
d. Main mattress and bolter insertions must fit without any gaps into bariatric bed sleeping surface.
3.2.2 Mattress thickness: Minimum 6 inches (including the mattress topper).
3.2.3 Mattress topper material: 15%-25% Visco-elastic foam.
3.2.4 Seamless cover material: Nylon or Polyurethane.
3.2.5 Weight capacity: Minimum 1000 lbs.
| 1.0 Scope |
| 2.0 Applicable Laws and Standards |
| 2.1 Laws, Regulations, Policies |
| 2.2 Industry Standards |
| 3.0 General Requirements |
| 3.1 Bariatric Bed |
| 3.2 Bariatric Mattress |
File details come from the government source that posted it. Updated .