Attachment_1_-SOW_Rubber_Flooring.pdf
PDF 355 KB Posted
- Solicitation number
- F3G3AA6218AG03
- Issued by
- Clark County, Nevada
About this file
This is a Statement of Work for the Office of the Base Civil Engineer at Nellis Air Force Base in Nevada regarding the replacement of rubber flooring in Building 270's Wheel and Tire Shop. The project involves removing and disposing of approximately 2,800 square feet of existing buckled and deteriorating rubber flooring and installing new rubber flooring that meets specific performance requirements. The new flooring must have a minimum thickness of 1/3 inch, be black in color, slip-resistant, and chemical-resistant to petroleum-based products including motor oil, jet fuel, and grease. The contractor shall prepare the concrete substrate, ensure all seams are flush with proper connections and no gaps or buckling, groove all open seams, and apply seam welding treatment. The project is located at Building 270 (Phase Dock) on the Main Base at 4141 Tyndall Avenue, Nellis Air Force Base, Nevada 89084, at the intersection of Tyndall Avenue and Rickenbacker Avenue. Standard working hours are 7:00 a.m. to 4:00 p.m., Monday through Friday, excluding Federal Holidays and the day after Thanksgiving. The contractor must clean all job-related debris daily and upon project completion.
This contract is designated as a Total Small Business Set-Aside under NAICS code 238330 (Flooring Contractors). All work must comply with applicable federal, state, local, and Nellis Air Force Base laws, regulations, and codes, including environmental protection requirements under NAFB Management Plan 12. The contractor's personnel must conduct themselves professionally, and the 57 Maintenance Group will perform periodic quality assurance evaluations. All work must conform to industry standards and manufacturer recommendations, comply with the National Electric Code (NFPA 70), International Building Code (2009 Edition), DoD Unified Facilities Criteria Standards, and other applicable codes and accepted industry practices. Asbestos-containing materials and lead-based paint testing will be conducted by the 99 CES if required based on site conditions.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOO-1
STATEMENT OF WORK
FOR
Replace Rubber Flooring in Wheel & Tire Shop, B270
NELLIS AIR FORCE BASE, NEVADA
6 August 2026
OFFICE OF THE BASE CIVIL ENGINEER
NELLIS AIR FORCE BASE, NEVADA
SOO-2
STATEMENT OF WORK
1. OVERVIEW: The existing rubber flooring in the Wheel and tire shop at building 270 is in need of replacement. The flooring is buckling and falling apart which causes a hazardous condition for employees.
SCOPE: The purpose of the contract is to replace approximately 2,800 square feet of rubber flooring in the Wheel and Tire shop. The new rubber flooring must have a minimum thickness of 1/3 in, black in color, slip resistant, and chemical resistant (specifically petroleum containing products such as motor oil, jet fuel, grease, etc.). The Contractor shall remove all existing rubber flooring to include the adhesive glue and properly dispose of the material. The contractor shall prepare the concrete floor to accept the new adhesive and rubber flooring. The contractor will ensure that all seams are flush and properly connected with no gaps or buckling. The contractor shall groove all open seams and apply seam welding treatment. At the end of each day and at the completion of the project, the contractor will clean all job-related debris from area.
LOCATION: The project site is located at Nellis Air Force Base, Nevada. The Main Base is located approximately 9 miles north of downtown Las Vegas on Highway US 93 (Las Vegas Blvd.). NAFB consists of three main areas: the Main Base, Area II, and Area III. The specific project location is on the Main Base in Building 270, the Phase Dock, located at the intersection of Tyndall Ave and Rickenbacker Ave,4141 TYNDALL AVE, NV, 89084.
1. ENVIRONMENTAL PROTECTION: All work and the contractor’s operations shall comply with the requirements imposed by all applicable federal, state, local, and NAFB laws, regulations, codes, and permits (including NAFB Management Plan 12) concerning environmental protection. If required per the task in the area where work is to be performed, an asbestos-containing material and a lead-based paint test will be done by the 99 CES.
2. CONTRACTOR PERSONNEL: The contractor’s personnel shall conduct themselves in a professional manner.
3. QUALITY ASSURANCE: The government, through the 57 Maintenance Group, will periodically evaluate the contractor’s performance in accordance with the specific contract performance requirements.
4. WORKING HOURS: Standard working hours are from 7:00 a.m. to 4:00 p.m. Monday through Friday excluding Federal Holidays and the day after Thanksgiving.
5. GENERAL CONDITIONS: All work must be in compliance with and conform to industry standards and applicable manufacturer’s recommendations. Any electrical wiring, connections, and structural designs shall be installed IAW latest version of the NFPA 70 National Electric Code (NEC), Uniform Mechanical Code, and NFPA 54, ASME CSD-1 (Controls & Safety Devices).
All work must be in compliance with the International Building Code (IBC). 2009 Edition, DoD Unified Facilities Criteria Standards (UFC) Unified Plumbing Code (UPC) and all accepted industry practices. At the completion of the project, the system should be 100% operational.
SOO-3
--------------------------- END OF STATEMENT OF WORK---------------------------
File details come from the government source that posted it. Updated .