ATTACHMENT 1_SOW NEPE_VC doors.pdf

ATTACHMENT 1

Statement of Work

Replace Doors at Spalding Visitor Center

1.0 Background: The Spalding Visitor Center acts as the main visitor contact station and park headquarters for Nez Perce National Historical Park located in Spalding, Idaho. The doors in the Visitor Center are well over 30 years old and are needing continual repairs to address the excessive use required of park operations and the weathering of the exposed exterior doors. The major objective of this project is to replace the worn-out doors in the facility while addressing durability, accessibility, and fire prevention. Project includes the replacement of exterior and interior doors some of which will require automatic openers for accessibility, electromagnetic door lockers and holders, key fob entry, and storefront style aluminum door replacement. When accomplished this project should improve the access of the facility, help prevent the spread of fire, and provide dependable security and function that the park expects from its’ facilities doors.

Visitor Center is located at 39063 US Hwy. 95 Spalding, Idaho 83540, 11 miles south of Lewiston, Idaho.

2.0 Project Scope of Work

Project entails removing and replacing main entrance and rear entrance, storefront style, double doors. The replacement doors will need to have a touch/panic bar style opener, accessible automatic door opener or opening assist, accessible pull handle, and tempered glass. Removing and replacing auditorium double interior doors and exterior doors with galvanized steel doors with pull handle and touch/panic bar opener. Single door replacement will be comprised of the office entrance door (electromagnetic fob activated locker) and the two stairwell doors which need to be replace with galvanized fire rated doors and door jambs. Lastly, the two double doors at the downstairs entrance will need to be replaced with galvanized steel doors with viewing windows, pull handles, touch/panic bars, assisted openers, and electromagnetic lockers that are fob activated. These doors accessibility will also need to be upgraded since they are supposed to be the accessible entrance to the downstairs which has a research library open to the public.

Schedule of Work

1. Work can be done from 6:00 am to 4:00 pm, Monday through Friday, excluding federal holidays.

3.0 Products

Contractor will furnish replacement doors for the locations listed below. The doors will meet the fire rating criteria specified in this document and meet all Architectural Builders Act requirements that apply.

A. Front Main Entrance Doors and Jamb, Automatic or Assisted Door Closer, ABA or ADA door hand pull, vertical style push bar, kick stop, Stanley Best Lock compatible key lock, and weather stripping

B. Back Entrance Doors and Jamb, Automatic or Assisted Door Closer, ABA or ADA door hand pull, vertical style push bar, kick stop, Stanley Best Lock compatible key lock, and weather stripping

C. Auditorium Interior Doors, vertical style push bar, kick stop, Stanley Best Lock compatible key lock

D. Auditorium Exterior Doors, vertical style push bar, kick stop, Stanley Best Lock compatible key lock, and weather stripper

E. Office Entry Door, electromagnetic lock compatible with HID Key Fob reader, ABA or ADA door hardware compatible with Stanley Best Lock compatible key core

F. Upstairs Stairwell Door and Jambs, electromagnetic locking opener connected to fire system, ABA or ADA door hardware compatible with Stanley Best Lock compatible key core

G. Downstairs Stairwell Door and Jambs, electromagnetic locking opener connected to fire system, ABA or ADA door hardware compatible with Stanley Best Lock compatible key core

H. Downstairs Exterior Entrance Doors and Jambs, Automatic or Assisted Door Closer, electromagnetic lock compatible with HID Key Fob reader, ABA or ADA door hand pull, vertical style push bar, kick stop, Stanley Best Lock compatible key lock, and weather stripping

I. Downstairs Interior Entrance Doors and Jambs, Automatic or Assisted Door Closer, ABA or ADA door hand pull, vertical style push bar, kick stop, Stanley Best Lock compatible key lock, and weather stripping

4.0 Quoter Tasks

1) Remove all existing door trim in each room prior to door removal and installation

2) Remove and replace existing door jambs and transom parts if specified or necessary

3) Remove and replace existing doors in accordance with manufacturer’s instructions

4) Install specified door device including automatic door openers or assisted openers, electromagnetic locking systems, weather stripping, door holders, kick plates, and door hardware

5) Dispose of existing doors and all other removed items in compliance with all local, state and federal regulations.

6) Re-install door trim unless trim was damaged in the removal, in that case trim must be replaced with matching trim of size and stain color

7) Assure doors and devices function as intended; fit and finish are of professional workmanship

A. Front Main Entrance Doors

Pair 3’0”x7’0”x1 ¾”

1. Door frames doors will be storefront aluminum style doors, matching in likeness and color to current doors

2. Glass on doors will be tempered glass

3. New door jams will be installed

4. Doors will have automatic opening or assisted opening door closers on both doors

5. Doors will have a vertical style push bar exit device

6. Doors will have a mounted kick/push door stop

7. Doors will be compatible with Stanley Best Lock style 7 pin key core

8. Lock rails will be adjusted if needed

9. Install weather stripping on doors

10. Doors will have ABA compliant pull handles

B. Back Entrance Doors

Pair 3’0”x7’0”x1 ¾”

1. Door frames and doors will be storefront aluminum style doors, matching in likeness and color to current doors.

2. Glass will be tempered glass

3. Doors will have automatic opening or assisted opening door closer

4. Doors will have a vertical style push bar exit device

5. New door jambs will be installed transom pieces may need to be replaces or altered to accept new door

6. Doors will have a mounted kick stops

7. Doors will be compatible with Stanley Best Lock style 7 pin key core

8. Lock rails will be adjusted if need be

9. Install weather stripping on doors

10. Doors will have ABA compliant pull handles

C. Auditorium Doors Interior/Exterior:

Interior: Pair 3’0”x7’0”x1 ¾” Exterior: Pair 3’0”x7’0”x1 ¾”

1. Door frames and doors, interior and exterior will be double doors, painted to match existing doors

2. Door frames and doors, interior and exterior will be galvanized steel, fire rated for minimum of ninety (90) minutes.

3. New door jambs will be installed

4. Doors will have mounted kick/push door stops.

5. Doors will be compatible with Stanley Best Lock style 7 pin key core

6. Lock rails will be adjusted if need be.

7. Doors will have a panic push/pull deadlatch paddle.

8. Doors will have ABA compliant pull handles.

D. Office Entry Door and Stairway Doors:

Office Entry Door 3’0”x7’0”x1 ¾”

1. Door will be a regular style door.

2. Door frames and door, door will be galvanized steel, fire rated for minimum of ninety

(90) minutes.

3. New door jambs will be installed.

4. Doors will be compatible with Stanley Best Lock style 7 pin key core

5. Door will have a new electromagnetic lock installed.

6. Door will have mounted kick/push door stops.

7. Door will have a panic push/pull deadlatch paddle.

8. Door will have an ABA approved door handle.

E. Upstairs Stairway Door

3’0”x7’0”x1 ¾”

1. Upstairs Stairway Door, door frames and door will be a regular style door.

2. Upstairs Stairway Door, door frames and door will be galvanized steel, fire rated for minimum of ninety (90) minutes.

3. Upstairs Stairway Door, new door jambs will be installed.

4. Upstairs Stairway Door, door will have a new magnetic door holder installed, steel, 35 lbs strength

5. Doors will be compatible with Stanley Best Lock style 7 pin key core

6. Upstairs Stairway Door, door will have an ABA approved door handle.

F. Downstairs Stairway Door

3’0”x7’0”x 1 ¾”

1. Downstairs Stairway Door, door will be a regular style door.

2. Downstairs Stairway Door, door frames and door will be galvanized steel, fire rated for minimum of ninety (90) minutes.

3. Downstairs Stairway Doors, new door jambs will be installed.

4. Downstairs Stairway Door, door will have a new magnetic door holder installed, steel, 35 lbs strength.

5. Doors will be compatible with Stanley Best Lock style 7 pin key core

6. Downstairs Stairway Door, door will have an ABA approved handle.

G. Bottom Entrance Doors Interior/Exterior:

Bottom Entrance Doors Interior/Exterior Interior: Pair 3’0”x7’0”x1 ¾” Exterior: Pair 3’0”x7’0”x1 ¾”

1. Door frames and doors will be double doors

2. Doors will have ABA or ADA approved assisted opening

3. Doors will have a small window for viewing

4. Doors frames and doors will be galvanized steel

5. New door jambs will be installed

6. Doors will have mounted kick/push door stops.

7. Doors will be compatible with Stanley Best Lock style 7 pin key core

8. Doors will have a panic push/pull deadlatch paddle.

9. Doors will have ABA compliant pull handles.

10. Exterior doors with have new electromagnetic opener compatible with HID proximity fob key reader

Quoter will be responsible for moving all appliances and furniture necessary to complete door removal and installment with NPS employee staff oversight.

5.0 Quoter Use of Premises

A. Quoter shall at all times conduct their operations to ensure the least inconvenience and provide a schedule so we can let public know when this is going to take place.

B. Prevent damage to interior walls and woodwork. Restore surfaces that are damaged due to the work of this contract to original condition, by repairing, replacing and or refinishing damaged areas at no additional cost to the government.

C. Quoter may work Mon-Fri from 6:00 AM to 4:30 PM, except on federal holidays.

D. Keep project neat, orderly, and in a safe condition at all times. On a daily basis and at the end of the contract, quoter shall ensure all trash and debris has been removed doorways and surrounding work areas

6.0 Safety

A. Quoter is responsible for ensuring safety of the public and their employees at all times during this contract in accordance with all applicable regulations.

B. Should any unforeseen hazards become evident during the performance of work, the quoter shall bring such hazard to the attention of the COR for resolution as soon as possible. In the interim, take necessary action to re-establish and maintain safe working conditions in order to safeguard on-site personnel, visitors, the public, and the environment.

C. Work performed under this contract shall comply with applicable federal, state, and local safety and occupational health laws and regulations. This includes, but is not limited to, Occupational Safety and Health Administration (OSHA) standards, 29 CFR.

7.0 Submittals

7.1 All doors and associated devices will be approved by the Contracting Officer

Representative before installation. Contractor will send one of the following documents for approval; a brochure, specification sheet, or cut sheet in advance of installation.

7.2 Contractor will send a construction schedule 14 days prior to mobilization, of the dates and door locations work will occur. The schedule is critical so that park staff can make arrangements and alternative access for park visitors.

Welch, Sarah J.

Do you want to allow or require weekend work for the lobby, assuming the VC is closed on weekends in the fall?

8.0 Appendix/Photos

8.1 Front Main Entrance Doors

8.2 Back Entrance Doors

8.3 Auditorium Interior Doors

More Photos on Next Page

8.4 Auditorium Doors Exterior

8.5 Office Entrance Door

8.6 Upstairs Stairwell Door

8.7 Downstairs Stairwell Door

More photos on next page.

8.8 Downstairs Back Entrance Door

8.9 Downstairs Back Entrance Door Exterior

End of Photos