Attachment 1 SOW FINAL.pdf

STATEMENT OF WORK

Locksmith Supplies

INTRODUCTION: The locksmith shop located within the Security Services Directorate (SSD) of the

Pentagon Force Protection Agency (PFPA) requires a Blanket Purchase Agreement (BPA) to procure equipment to maintain the current locksmith tools and equipment as well as the ability to purchase new unforeseen equipment based on changing security posture and environment.

SCOPE: The Contractor shall provide the following equipment to support existing equipment in place at the locksmith shop. This equipment as well as any equipment of similar locksmith tools scope under the micro-purchase shall be purchased with the Government Purchase Credit Card on an as needed basis. Equipment will be delivered to the Government warehouse. The Contractor shall be able to deliver the equipment to the Government within 30 days of the request.

ORDERING PERIOD: This agreement will be for five (5) ordering periods from the time of the award.

TOTAL BPA VALUE: The total value of the agreement shall not exceed $600,000.00.

LOCKSMITH SUPPLIES CATALOG:

Locksmith Supply Price Catalog (FY)

The Government shall utilize the Price Catalog to order against this BPA for a duration of one year.

Any changes in pricing for this catalog must be approved by the Contracting Officer.

Item Description (including salient characteristics)

Est. Qty per Year

(min/max)

Cost per Unit Total Cost

1. ¼” x 4 Carbide Drill Bits smooth shank straight flute Cha1/4x4c w/ twisted flute Mrt1/4x4c

50/300

2. 3/8” x 5 Carbide Drill Bits smooth shank but twisted SA 3/8x5c 20/100

3. 3/8” x 6 Carbide Drill Bits smooth shank straight flute CHA3/8x6c w/twisted flute MRT 3/8x6c

20/100

4. ¼” x 4” Diamond tip Core Tip Drill bit MAG1001DC 50/200

5. Grade 1 electrified mortise lock with same through holes as Yale 8800 series mortise locks and August handle desFign. Must be in 626 finish and be equipped with internal Request to Exit switch.

Must be fail secure with inside handle always free and outside handle locked when no power or

20/50 when key is used.

Similar to Yale Mortise Lock 8891-26-

REX-AUR-24VDC

6. Handles fitting Kaba Ilco EPlex lock with Best Prep. Eplex Handles for best prep and Keymark tailpiece

0/25

7. Keymark tailpiece fitting EPLex lock

8. Group 1 combination lock meeting federal specification FF-L- 2937.

Similar to S&G 2937 Combination lock for Armory SG 2937200

0/10

9. Drilling fixture specifically designed to open GSA approved security containers. Has specialized templates with specific drill points mapped out on them to open high security safe meeting

FF-L-2740A.

The rig has an interchangeable base supplied, designed to cut the container locking bolt with carbide hole saws up

2" in diameter. Must be compact and light, being no more than 12” in length, 5” in width and weighing less than 8 lbs. Similar to MAS65701 High

Velocity Magnum Mini Rig

0/3

10. Template for above drill rig T6 for drill points on S&G 2740 and X-

07/08/09

0/3

11. 11-in-1 multi bit screwdriver similar to Klein 32500

3/9

12. Cover plate for 86 edge prep 0/20

13. 6 pin cylinder operated with

Keymark key on the 9GS keyway for Schlage Lever D

Series

0/50

14. 6 pin cylinder operated with Keymark key on the 9GS keyway for Arrow Lever A, C and D Series

15. 20V Cordless Battery Drill with battery. Must have ½” chuck, weigh less than 3.1 lbs., have multiple clutch settings, multiple speed setting, with a max RPM of at least

1700. Fitting existing

Dewalt 20V batteries is preferred.

DWD940XX

0/8

16. 12V Battery Operated Screwdriver kit, with 12V battery, with ¼” chuck, weighing less than 2 lbs, with Max RPM of at least 1300.

Fitting existing Bosch PS21-2A batteries is preferred.

0/5

17. Removable Core Housing accepting ASSA IC Core V10 cylinder in 626 finish with #5

Cam. Similar to 60601-5-626

0/75

18. 1-3/4” Removable Core Housing accepting ASSA IC Core V10 cylinder in 626 finish with #5 Cam.

Similar to 60606-5-626

0/100

19. Hole Saws Bi-Metal 5/8 0/50

20. Hole Saws Bi-Metal 1 ¼ 0/50

21. Hole Saws Bi-Metal ¾ 0/50

22. Hole Saws Bi-Metal 1 5/8 0/50

23. Drill Bits HS Steel jobber length

3/32

0/25 each a)

b. Drill Bits HS Steel jobber length 1/8 b)

c. Drill Bits HS Steel jobber length 3/16 c)

d. Drill Bits HS Steel jobber length 5/16 d)

e. Drill Bits HS Steel jobber length 3/8 e)

f. Drill Bits HS Steel jobber length ¼ f)

g. Drill Bits HS Steel jobber length 7/16 g)

h. Drill Bits HS Steel jobber length 11/64 h)

24. Drill bits No. 25 Part#6429 0/25

25. Drill Bit High Speed Steel 6 long

3/16

0/25

26. Door plates to cover holes on

LKM7000 similar to

LKM7000DCIO

0/20

27. Pedestrian CDX-09 Door Lock opening tool similar to KMPDLOT

28. Replacement tip for Pedestrian

CDX-09 Door Lock opening tool

29. High Speed & Carbide Tipped Hole

Saw Kit with 1- 1/4"(32mm), 1-

3/8"(35mm), 1- 1/2"(38mm), 1-

3/4"(44mm), 2"(51mm) & 2-

1/8"(54mm) hole saws; mandrel w/pilot drill in a plastic case

0/10

30. High Speed Hole Saw 2” Diameter with arbor

0/20

31. Carbide Tipped Hole Saw 2”

Diameter with arbor)

0/20

32. Chisel Punch ¼” 0/5

33. Pin Punch ¼” 0/5

34. K22 Lever Opening tool 0/5

35. LKM2Kit Kit includes one each: 2” dia high speed steel hole saw; 2” Dia carbide tipped hole saw, 3/8 Arbor; pilot drill bit. It is a kit with items 49 and 50 included

36. AA Batteries Alkaline (24 pack) 50/250

37. 7 in 1 Screw driver similar to

Crescent dura driver SDMB7V

0/15

38. 3 ¾ Grade 1 Deadlatch brushed chrome finish, similar to Schlage 14-

028-626

39. Removable Core Mortise Housing accepting Corbin IC Core cylinder in 626 finish with A01 cam, similar to Corbin 1040-114-A01-6X626

40. Removable Core Rim Housing accepting Corbin IC Core cylinder in 626 finish with horizontal tailpiece, similar to Corbin 3040-

114-6X626

41. Small Format Interchangeable

Core (SFIC) cylinder, combinated with 2 operating keys and 1 control key, keyed different, similar to GMS lock cylinder IC-

6-A-26D

42. Adjustable mortise collar ring, similar to Kaba Ilco 861A-26D- 10

43. ASSA Key blanks uncut, similar to

Twin V-10, Keyway 99/side Code

P29A

0/400

44. ASSA cylinders combinated with

2 keys keyed different, similar to

V70600IC, Finish 626, Keyway

99, Sidecode P29A, System

Number 6JA1402A, end user

Pentagon P5

0/200

45. GSA approved single motion egress lock, meeting federal specification

FF-L-2890B, similar to lockmasters

LKM10KHX10 with strike requested at time of order

0/40

46. GSA approved single motion egress

FF-L-2890B, similar to lockmasters

LKM10KPX10 with strike requested at time of order

47. Single motion egress lock, similar to lockmasters LKM10KHE with strike requested at time of order

0/15

48. Single motion egress lock, similar to lockmasters LKM10KPE with strike requested at time of order

49. GSA Approved combination safe

FF-L-2740B

similar to Dorma Kaba X10

0/30

50. GSA Approved combination door

FF-L-2890B similar to Dorma Kaba

CDX10 with strike requested at time of order

0/30

51. LKM10K Front trim 0/20

52. X-10 Cable Assembly 4-1/2”

KABA 527100

0/15

53. X-10 Spindle Assembly, KABA

524004

0/20

54. X-10 Spindle Screws 100 pk, KABA 67200220

0/15

55. X-10 Dial, MAS 504068 0/20

56. X-10 Hub Assembly, MAS 504067 0/20

57. Pushbutton cypher lock, similar to

Kaba E5031M-WL-0-626-41

0/20

58. 8 piece steel plier wrench set with:

10" Adjustable Wrench, 6" Non-Slip Grip

Diagonal Cut Plier, 7-1/2" Long Nose

Plier with Cutter, 9" Non-Slip Grip

Linesman Plier, 6" Slip Joint Plier w/Cutter, 6-1/2", 10" V-Jaw Tongue and

Groove Plier, 12" Curved, V-Jaw Tongue and Groove Plier Similar to Channellock

GS-28

0/6

59. 9-1/4” Carbon Steel Linesman

Pliers with 1-9/32” Jaw length

60. Digital multimeter measuring AC, DC, current, resistance with digital display as well as audible continuity testing. CAT III 600V instrument safety rating

61. 16 piece folding allen set (metric and standard)

0/6

62. T45 Torx bit with 5/16 hex shank

0/10

63. LED handheld rechargeable flashlight with at least 500 lumens

64. 38-piece screwdriver bit sex with

¼” hex shank. Similar to Dewalt

DW2169. Must include ¼ to 3/8” socket adapters, #2

65. Philips bits, 1” bits and multiple bits for Philips and slotted screws

0/6

66. #3 10K Strike Plate

Similar to Lockmasters

LKM10K03S

0/6

67. #2 10K Strike Plate

Similar to Lockmasters

LKM10K02S

0/6

68. #9 10K Strike Plate

Similar to Lockmasters LKM10K09S

0/6

69. Inside Base Plate – Handle

Inside lock base plate for Lockmasters

LKM10K, similar to LKM10KHBASE

0/6

70. Inside Base Plate – Panic

Inside lock base plate for Lockmasters

LKM10K, similar to LKM10KPBASE