Attachment 1 SOW.docx

USDA ARS Oklahoma and Central Plains Agricultural Research Center 7207 W. Cheyenne St.

El Reno, OK 73036

Statement of Work

Repair and/or Replace broken doors in 621800B001

1. Project Description:

Replace/repair select interior and exterior doors at the USDA-ARS Oklahoma and Central Plains Agricultural Research Center, located at 7207 W. Cheyenne Street, El Reno, OK 73036.

All new doors will match the fire rating of the door they are replacing. Or the new door will bring the fire rating up to code for its location.

Existing door dimensions, fire ratings and hang/swing types/directions are attached. Specs are believed to be accurate but, should be verified by contractor prior to bid.

Doors to be replaced:

10- LAB doors with lite (Wood doors, replace with painted metal doors).

9- (HALF/POCKET) LAB doors (Wood doors, replace with painted metal doors).

2- Lobby doors with lite. (Wood doors replace with painted metal doors).

18- basement doors (Wood doors, replace with painted metal doors).

1- Exterior, ground level door. (Replace with painted metal door) 2- Exterior, ground level doors with lite (replace with painted metal doors).

4- 1st floor main entry, store-front metal framed glass, doors need replaced or repaired 2- 1st floor, solid core wooden doors (Replace with like materials) 2- 2nd floor, solid core wooden doors (Replace with like materials) 2- 2nd floor, solid core wooden doors with lite (Replace with like materials) 1- Attic, top of stairs door. (Wood door, replace with painted metal).

-Total new metal doors – 34 -Total new metal half door – 9 -Total new wooden doors – 6 -Total new store-front doors – (4 if necessary and not repairable)

Work includes:

1-1. Remove door(s) to be replaced. Off-site disposal is the contractor's responsibility. Some of the doors being replaced may still be in usable condition. Maintenance staff will be allowed to keep some/any of the removed doors and hardware for facility needs.

1-2. Provide and install new, painted metal door(s). Paint to match door frame.

1-3. Provide and install new, wooden door(s). New wooden doors to match existing doors.

1-4. Make necessary modifications/repairs to existing door frame(s) for new door(s) installation.

1-5. Provide and install new hinges for all new doors. New hinges should be of equal or greater type/quality/durability as the hinges being replaced.

1-6. Transfer existing Door handle, lock, and closer hardware to new doors. Each door is keyed differently, so the existing doors hardware will be transferred directly to its replacement.

The contractor shall furnish all labor, tools, equipment, transportation to the job site, and supervision for the job indicated above. The contractor shall furnish all material except material listed in the government furnished material section of this document.