Attachment_1_-_SOW_Billings_Gym.pdf

BDC Outdoor Gym Equipment and Storage

1.0 Background

The Billings Dispatch Center requires additional fitness equipment and storage for the increased number of staff on the campus. BLM utilizes fitness equipment for team members who are required to exercise as part of their regular duties. The existing equipment is no longer sufficient.

2.0 Scope

Provide the following fitness equipment or approved equal. All equipment shall be outdoor commercial gym quality manufactured with materials and finishes that will not flake or chip. All products shall be delivered and installed.

• Weight Storage Shed o Locking outdoor shed with interior lights with dedicated racks for the following:

Barbell holders Universal storage shelving for dumbbells, medicine balls, and weight plates Weight bench storage

• Outdoor Use Appropriate Squat Rack o Specifications:

Dimensions:

• Upright Height - 110”

• Panel Width - 43”

• Squat Rack – 30” (full rack)

Multiple use weight rack that must include the following

• Squat/bench press rack

• Pull up bar

Construction Material

• Minimum, commercial grade 3” x 3” 11-gauge steel

• High quality matt Black finish with rust protection o Rack/rig attachments and accessories Landmine Attachment

• One single hinge-style landmine attachment Battle rope anchor

Wall ball target

• 10’

Six J-cups Two pair of movable squat safety spotter bars Tricep dip bar

• Barbells o Three barbells rated for Olympic power lifting o High durability o Protective coating to protect from elements o 45 pounds weight

• Hex Bar o One hex bar needed o Protective coating to protect from elements and wear and tear o 60 pounds weight

• Barbell Weight Clips o Four sets of clips o Easy to use function o Top rated for securing weights to bars

• Dumbbells o Two partial sets of dumbbells, 20-50 pounds, in 5 pound increments, a total of 28 dumbbells o Rubber coated o Textured grips

• Kettlebells o Rubber coated to reduce damage to workout surfaces o Two kettlebells each in the following weights

35 pounds, 44 pounds, 53 pounds

• Medicine Balls o Two medicine balls of each of the following weights

10 pounds, 20 pounds, 30 pounds o One medicine ball in each of the following weights

14 pounds o Made with rubber

• Bumper Plates o Bumper plates need to be made out a durable rubber designed for dropping on rough surfaces and with medium bounce.

8 ea, 45lbs plates 6 ea, 35lbs plates 8 ea, 25lbs plates 10 ea, 15lbs bumper plates 10 ea, 10lbs bumper plates

• Flat Bench o One flat bench needed for bench press and other lifts o High quality steel is needed to ensure longevity and stability of equipment o Thick durable padding that will hold up to years or use and won’t break down

• Adjustable Bench o Two adjustable weight benches o Bench needs to fit the requirements of the flat bench above o Needs to be able to adjust from flat bench to 90 degrees upright

• Battle/Conditioning Rope o Diameter of 1.5 inches o Length of 30’

• Suspension Trainer o Adjustable nylon 6’-9’ o Rubber grips o Adjustable foot cradles

• Plyometric Box o Two 3-in-1 Heavy Foam plyometric boxes 20” x 24” x 30”

Fitness room size is approximately 24’ x 31’ the ceiling is approximately 12’ high. The room has a rubber mat flooring material. Vendor shall provide a scaled drawing showing how the equipment will be located in the room and demonstrate that there is adequate circulation space. The drawing below shows the room configuration and existing equipment provided by other vendors.

Stationary Cycle, Stair Stepper, and Treadmill by others.

TV monitor (by others)

Drinking fountain (by others)

3.0 Delivery, Installation, and demonstration

Equipment shall be delivered and installed in the fitness room. The fitness room is located at ground level and has an exterior access door. BLM has a forklift on site and will offload materials as needed. The facility is available during regular business weekdays 8 am – 4 pm. There is no specific security credentials required for facility access during the installation. At the completion of the installation, vendor shall provide a minimum 1-hour training session to demonstrate the proper use, care, and storage of all supplied equipment.

4.0 Place of Performance

BLM Eastern Montana Dakotas District Billings Station 1299 Rimtop Drive Billings, MT 59105